A model of dry friction tensioner in a belt-pulley system considering transverse belt vibration is developed, and the influence of the dry friction on the system dynamics is examined. The discretized formulation is divided into a linear subsystem including linear coordinates and a nonlinear subsystem addressing tensioner arm vibration, which reduces the dimension of the iteration matrices when employing the harmonic balance method. The Coulomb damping at the tensioner arm pivot mitigates the tensioner arm vibration but not necessarily the vibrations of other system components. The extent of the mitigation varies for different excitation frequency ranges. The critical amplitude of the dry friction torque beyond which the system operates with a locked arm is determined analytically. Superharmonic resonances are observed in the responses of the generalized span coordinates, but their amplitudes are small. The energy dissipation at the tensioner arm hub is discussed, and the stick-slip phenomena of the arm are reflected in the velocity reversals near the arm extreme location. Dependence of the span tension fluctuations on Coulomb torque is explored.
Skip Nav Destination
e-mail: parker.242@osu.edu
Article navigation
February 2008
Research Papers
Influence of Tensioner Dry Friction on the Vibration of Belt Drives With Belt Bending Stiffness
Farong Zhu,
Farong Zhu
Department of Mechanical Engineering, Scott Laboratory,
The Ohio State University
, 201 W. 19th Avenue, Columbus, OH 43210-1142
Search for other works by this author on:
Robert G. Parker
Robert G. Parker
Department of Mechanical Engineering, Scott Laboratory,
e-mail: parker.242@osu.edu
The Ohio State University
, 201 W. 19th Avenue, Columbus, OH 43210-1142
Search for other works by this author on:
Farong Zhu
Department of Mechanical Engineering, Scott Laboratory,
The Ohio State University
, 201 W. 19th Avenue, Columbus, OH 43210-1142
Robert G. Parker
Department of Mechanical Engineering, Scott Laboratory,
The Ohio State University
, 201 W. 19th Avenue, Columbus, OH 43210-1142e-mail: parker.242@osu.edu
J. Vib. Acoust. Feb 2008, 130(1): 011002 (9 pages)
Published Online: November 12, 2007
Article history
Received:
September 8, 2006
Revised:
April 23, 2007
Published:
November 12, 2007
Citation
Zhu, F., and Parker, R. G. (November 12, 2007). "Influence of Tensioner Dry Friction on the Vibration of Belt Drives With Belt Bending Stiffness." ASME. J. Vib. Acoust. February 2008; 130(1): 011002. https://doi.org/10.1115/1.2775510
Download citation file:
Get Email Alerts
Comprehensive Analysis of Input Shaping Techniques for a Chain Suspended From an Overhead Crane
J. Vib. Acoust (August 2024)
Related Articles
Nonstick and Stick-Slip Motion of a Coulomb-Damped Belt Drive System Subjected to Multifrequency Excitations
J. Appl. Mech (November,2003)
Factors Affecting Transmission Error in Helical Synchronous Belt With Error on Belt Side Face Under Bidirectional Operation
J. Mech. Des (July,2010)
On a Perturbation Method for the Analysis of Unsteady Belt-Drive Operation
J. Appl. Mech (July,2005)
Mechanics and Sliding Friction in Belt Drives With Pulley Grooves
J. Mech. Des (March,2006)
Related Proceedings Papers
Related Chapters
Computer Aided Machine Design
Computer Aided Design and Manufacturing
Fluidelastic Instability of Tube Bundles in Single-Phase Flow
Flow-Induced Vibration Handbook for Nuclear and Process Equipment
Fundamentals of Structural Dynamics
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook