This paper presents a study of thickness deformation of the viscoelastic material in constrained layer damping (CLD) treatments. The first goal of the study is to demonstrate the feasibility of using direct measurement to investigate thickness deformation in CLD treatments. The experimental setup consisted of a constrained layer beam cantilevered to a shaker, an accelerometer mounted at the cantilevered end, and two laser vibrometers that simultaneously measured the responses of the base beam and the constraining layer, respectively, at the free end. A spectrum analyzer calculated frequency response functions (FRFs) between the accelerometer inputs and the vibrometer outputs. Measured FRFs of the base beam and the constraining layer were compared to detect thickness deformation. Experimental results showed that direct measurements can detect thickness deformation as low as 0.5 percent. The second goal is to evaluate the accuracy of a mathematical model developed by Miles and Reinhall [7] that accounts for thickness deformation. FRFs were calculated by using the method of distributed transfer functions by Yang and Tan [13]. Comparison of the numerical results with the experimental measurements indicated that consideration of thickness deformation can improve the accuracy of existing constrained layer damping models when the viscoelastic layer is thick.
Skip Nav Destination
Article navigation
April 2001
Technical Papers
Thickness Deformation of Constrained Layer Damping: An Experimental and Theoretical Evaluation
Peter Y. H. Huang, Graduate Research Assistant,
Peter Y. H. Huang, Graduate Research Assistant
Mechanical Engineering Department, University of Washington, Seattle, WA 98195-2600
Search for other works by this author on:
Per G. Reinhall, Associate Professor,
Per G. Reinhall, Associate Professor
Mechanical Engineering Department, University of Washington, Seattle, WA 98195-2600
Search for other works by this author on:
I. Y. Shen, Associate Professor,
I. Y. Shen, Associate Professor
Mechanical Engineering Department, University of Washington, Seattle, WA 98195-2600
Search for other works by this author on:
Jessica M. Yellin, Graduate Research Assistant
Jessica M. Yellin, Graduate Research Assistant
Mechanical Engineering Department, University of Washington, Seattle, WA 98195-2600
Search for other works by this author on:
Peter Y. H. Huang, Graduate Research Assistant
Mechanical Engineering Department, University of Washington, Seattle, WA 98195-2600
Per G. Reinhall, Associate Professor
Mechanical Engineering Department, University of Washington, Seattle, WA 98195-2600
I. Y. Shen, Associate Professor
Mechanical Engineering Department, University of Washington, Seattle, WA 98195-2600
Jessica M. Yellin, Graduate Research Assistant
Mechanical Engineering Department, University of Washington, Seattle, WA 98195-2600
Contributed by the Technical Committee on Vibration and Sound for publication in the JOURNAL OF VIBRATION AND ACOUSTICS. Manuscript received May 1999; revised Sept. 2000. Associate Editor: Kon-Well Wang.
J. Vib. Acoust. Apr 2001, 123(2): 213-221 (9 pages)
Published Online: September 1, 2000
Article history
Received:
May 1, 1999
Revised:
September 1, 2000
Citation
Huang, P. Y. H., Reinhall, P. G., Shen, I. Y., and Yellin, J. M. (September 1, 2000). "Thickness Deformation of Constrained Layer Damping: An Experimental and Theoretical Evaluation ." ASME. J. Vib. Acoust. April 2001; 123(2): 213–221. https://doi.org/10.1115/1.1340625
Download citation file:
Get Email Alerts
Numerical Analysis of the Tread Grooves’ Acoustic Resonances for the Investigation of Tire Noise
J. Vib. Acoust (August 2024)
Related Articles
Dynamic Viscoelastic Rod Stability Modeling by Fractional Differential Operator
J. Appl. Mech (January,2008)
Application of Dynamic Fractional Differentiation to the Study of Oscillating Viscoelastic Medium With Cylindrical Cavity
J. Vib. Acoust (October,2002)
Experimental and Analytical Investigations of the Dynamic Response of Adhesively Bonded Single Lap Joints
J. Vib. Acoust (January,2004)
Integrated Redesign of Large-Scale Structures by Large Admissible Perturbations
J. Offshore Mech. Arct. Eng (November,2003)
Related Proceedings Papers
Related Chapters
Contact (Joint) Stiffness and Damping
Handbook on Stiffness & Damping in Mechanical Design
Supporting Systems/Foundations
Handbook on Stiffness & Damping in Mechanical Design
Linear Viscoelasticity
Introduction to Plastics Engineering