An experimental study of the effects of bearing support flexibility on rotor stability and unbalance response is presented. A flexible rotor supported by fluid film bearings on flexible supports was used with fifteen support configurations. The horizontal support stiffness was varied systematically while the vertical stiffness was kept constant. The support characteristics were determined experimentally by measuring the frequency response functions of the support structure at the bearing locations. These frequency response functions were used to calculate polynomial transfer functions that represented the support structure. Stability predictions were compared with measured stability thresholds. The predicted stability thresholds agree with the experimental data within a confidence bound for the logarithmic decrement of ±0.01. For unbalance response, the second critical speed of the rotor varied from 3690 rpm to 5200 rpm, depending on the support configuration. The predicted first critical speeds agree with the experimental data within −1.7 percent. The predicted second critical speeds agree with the experimental data within 3.4 percent. Predictions for the rotor on rigid supports are included for comparison.

Issue Section:
Technical Papers
Keywords:
rotation, machine bearings, vibrations, mechanical stability
Topics:
Bearings, Rotors, Stability, Stiffness, Transfer functions, Sensors
1.
Bansal, P. N., and Kirk, R. G., 1975, “Stability and Damped Critical Speeds of Rotor-Bearing Systems,” ASME J. Ind., November, pp. 1325–1332.
2.
Gash
,
R.
,
1976
, “
Vibration of Larger Turbo-Rotors in Fluid-Film Bearings on an Elastic Foundation
,”
J. Sound Vib.
,
47
, No.
1
, pp.
53
–
73
.
3.
Queitzsch, G. K., 1985, “Forced Response Analysis of Multi-Level Rotor Systems with Substructure,” Ph.D. Dissertation, University of Virginia, Charlottesville, VA.
4.
Earles
,
L. L.
,
Palazzolo
,
A. B.
,
Lee
,
C.-K.
, and
Gerhold
,
C. H.
,
1998
, “
Hybrid Finite Element-Boundary Element Simulation of Rotating Machinery Supported on Flexible Foundation and Soil
,”
ASME J. Vibr. Acoust.
,
110
, pp.
300
–
306
.
5.
Fan
,
U.-J.
, and
Noah
,
S. T.
,
1989
, “
Vibration Analysis of Rotor Systems Using Reduced Subsystem Models
,”
J. Propul. Power
,
5
, No.
5
, pp.
602
–
609
.
6.
Wygant, K., 1993, “Dynamic Reduction of Rotor Supports,” Master thesis, University of Virginia, Charlottesville, VA.
7.
Rieger
,
N. F.
, and
Zhou
,
S.
,
1998
, “
An Instability Analysis Procedure for Three-Level Multi-Bearing Rotor-Foundation Systems
,”
ASME J. Vibr. Acoust.
,
120
, pp.
753
–
762
.
8.
Barrett, L. E., Nicholas, J. C., and Dhar, D., 1986, “The Dynamic Analysis of Rotor-Bearing Systems Using Experimental Bearing Support Compliance Data,” Proceedings of the Fourth International Modal Analysis Conference, Union College, Schenectady, New York, pp. 1531–1535.
9.
Nicholas
,
J. C.
, and
Barrett
,
L. E.
,
1986
, “
The effect of Bearing Support Flexibility on Critical Speed Prediction
,”
ASLE Trans.
,
29
, No.
3
, pp.
329
–
338
.
10.
Nicholas, J. C., Whalen, J. K., and Franklin, S. D., 1986, “Improving Critical Speed Calculations Using Flexible Bearing Support FRF Compliance Data,” Proceedings of the 15th Turbomachinery Symposium, Texas A&M University, College Station, Texas.
11.
Redmond, I., 1995, “Practical Rotordynamics Modeling Using Combined Measured and Theoretical Data,” Proceedings of the 13th International Modal Analysis Conference, Nashville.
12.
Redmond, I., 1996, “Rotordynamic Modelling Utilizing Dynamic Support Data Obtained From Field Impact Tests,” Paper C500/055/96, Proceedings of Sixth International Conference on Vibrations in Rotating Machinery, Oxford, Sept.
13.
Rouch, K. E., McMains, T. H., and Stephenson, R. W., 1989, “Modeling of Rotor-Foundation Systems Using Frequency-Response Functions in a Finite Element Approach,” 1989 ASME Design Technical Conference 12th Biennial Conference on Mechanical Vibration and Noise, Montreal, Canada, pp. 157–166.
14.
Stephenson
,
R. W.
, and
Rouch
,
K. E.
,
1992
, “
Generating Matrices of the Foundation Structure of a Rotor System from Test Data
,”
J. Sound Vib.
,
154
, No.
3
, pp.
467
–
484
.
15.
Feng, M. S., and Hahn, E. J., 1998, “On the Identification of a Flexibly Supported Rigid Foundation with Unknown Location of the Principal Axes of Inertia,” Proceedings of ISROMAC-7, the 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February, pp. 705–714.
16.
Lees, A. W., Friswell, M. I., Smart, M. G., and Prells, U., 1998, “The Identification of Foundation Vibration Parameters from Running Machine Data,” Proceedings of ISROMAC-7, the 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February, pp. 715–724.
17.
Sanathanan, C. K., and Koerner, J., 1963, “Transfer Function Synthesis as a Ratio of Two Complex Polynomials,” IEEE Trans. Autom. Control, January, pp. 56–58.
18.
Richardson, M. H., and Formenti, D. L., 1982, “Parameter Estimation from Frequency Response Measurements Using Fraction Polynomials,” Proceedings of the 1st International Modal Analysis Conference, Orlando, Florida, pp. 167–181.
19.
Richardson, M. H., and Formenti, D. L., 1982, “Global Curve Fitting of Frequency Response Measurements Using the Rational Fraction Polynomial Method,” Proceedings of the 3rd International Modal Analysis Conference, Orlando, Florida, pp. 390–397.
20.
Friswell
,
M. I.
, and
Penny
,
J. E. T.
,
1993
, “
The Choice of Orthogonal Polynomials in the Rational Fraction Polynomial Method
,”
Modal Analysis: the International Journal of Analytical and Experimental Modal Analysis
,
8
, No.
3
, pp.
257
–
262
.
21.
Maia, N. M. M., and Silva, J. M. M., 1997, Theoretical and Experimental Modal Analysis, Research Studies Press.
22.
Va´zquez, J. A., and Barrett, L. E., 1998, “Representing Flexible Supports by Polynomial Transfer Functions,” ASME paper 98-GT-27.
23.
Va´zquez, J. A., and Barrett, L. E., 1999, “Transfer Function Representation of Flexible Supports and Casings of Rotating Machinery,” Proceedings of the 17th International Modal Analysis Conference, Orlando, Florida, February.
24.
Va´zquez, J. A., 1999, “Using Transfer Functions to Model Flexible Supports and Casings of Rotating Machinery,” Ph.D. Dissertation, University of Virginia, Charlottesville, VA, January.
25.
Lanes
,
R. F.
, and
Flack
,
R. D.
,
1982
, “
Effects of Three-Lobe Bearing Geometries on Flexible Rotor Stability
,”
ASLE Trans.
,
25
, No.
3
, July, pp.
377
–
385
.
26.
American Petroleum Institute, 1995, Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries, API Standard 617, Sixth Edition, section 2.9.3.2.2.c, p. 21.
Copyright © 2001
 by ASME
You do not currently have access to this content.