This paper presents a brief review of techniques for designed-in passive damping for vibration control. Designed-in passive damping for structures is usually based on one of four damping technologies: viscoelastic materials, viscous fluids, magnetics, or passive piezoelectrics. These methods are discussed and compared. The technology of using viscoelastic materials for passive damping is discussed in more detail than the other methods since it is presently the most widely used type of damping technology. Testing and characterization of viscoelastic materials and design methods for passive damping are discussed. An example showing the benefits of a passive damping treatment applied to a stiffened panel under an acoustic load is presented.

1.
Aklonis, J. J., and MacKnight, W. J., 1983, Introduction to Polymer Viscoelasticity, 2nd Edition, John Wiley and Sons.
2.
Ferry
J. D.
,
Fitzgerald
E. R.
, and
Grandiene
L. D.
, and
Williams
M. L.
,
1952
, “
Temperature-Dependence of Dynamic Properties of Elastomers: Relaxation Distributions
,”
Ind. Eng. Chem.
Vol.
44
, No.
4
, Apr., pp.
703
706
.
3.
Ferry, John D., 1980, Viscoelastic Properties of Polymers, 3rd Edition, John Wiley and Sons.
4.
Forward, R. L., 1979, “Electronic Damping of Vibrations in Optical Structures,” Applied Optics, Vol. 18, No. 5, March.
5.
Fowler, B. L., 1989, “Interactive Processing of Complex Modulus Data,” Dynamic Elastic Modulus Measurements in Materials, ASTM STP 1045.
6.
Gibson, W. C., and Johnson, C. D., 1987, “Optimization Methods for Design of Viscoelastic Damping Treatments,” Proceedings of the ASME Conference on Vibration and Noise.
7.
Hagood, N. W., and von Flotow, A., 1991, “Damping of Structural Vibrations with Piezoelectric Materials and Passive Electrical Networks,” Journal of Sound and Vibration, Vol. 146, No. 1, April.
8.
Johnson, C. D., and Kienholz, D. A., 1982, “Finite Element Prediction of Damping in Structures with Constrained Viscoelastic Layers,” AIAA Journal, Vol. 20, No. 9, September.
9.
Johnson, C. D., Kienholz, D. A., Austin, E. M., and Schneider, M. E., 1985, “Design and Analysis of Damped Structures Using Finite Element Techniques,” Proceedings of the ASME Conference on Mechanical Vibration and Noise, Paper No. 85-DET-131.
10.
Johnson, C. D., editor, 1994, Proceedings, Passive Damping, Smart Structures and Materials 1994, SPIE Volume 2193, February.
11.
Jones, D. I. G., 1977, “A Reduced-Temperature Nomogram for Characterization of Damping Material Behavior,” 48th Shock and Vibration Symposium, October.
12.
Nashif, A. D., Jones, D. I. G., and Henderson, J. P., 1985, Vibration Damping, John Wiley and Sons.
13.
Rogers, L. C., 1989, “An Accurate Temperature Shift Function and A New Approach to Modeling Complex Modulus,” Proceedings of 60th Shock and Vibration Symposium, November.
14.
Williams
M. L.
,
Landel
R. F.
, and
Ferry
J. D.
,
1955
, “
The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-Forming Liquids
,”
J. Amer. Chem. Soc.
Vol.
77
, p.
3701
3701
.
15.
Vibration Damping 1984 Workshop Proceedings, Air Force Wright Aeronautical Laboratories, AFWAL-TR-84-3064, November.
16.
Damping 1986 Proceedings, Air Force Wright Aeronautical Laboratories, AFWAL-TR-86-3059, May.
17.
Proceedings of Damping ’89, Air Force Wright Aeronautical Laboratories, AFWAL-TR-89-3116, November.
18.
Proceedings of Damping ’91, Air Force Wright Aeronautical Laboratories, AFWAL-TR-91-3078, August.
19.
Proceedings of Damping ’93, Air Force Wright Aeronautical Laboratories, AFWAL-TR-93-3103, June.
This content is only available via PDF.
You do not currently have access to this content.