This paper presents a multidisciplinary design optimization of a turbocharger radial turbine for automotive applications with the aim to improve two major manufacturer requirements: the total-to-static efficiency and the moment of inertia of the radial turbine impeller. The search for the best design is constrained by mechanical stress limitations, by the mass flow and power, and by aerodynamic constraints related to the isentropic Mach number distribution on the rotor blade. The optimization of the radial turbine is performed with a two-level optimization algorithm developed at the von Karman Institute for Fluid Dynamics. The system makes use of a differential evolution algorithm, an artificial neural network (ANN), and a database as a compromise between accuracy and computational cost. The ANN performance predictions are periodically validated by means of accurate steady state 3D Navier-Stokes and centrifugal stress computations. The results show that it is possible to improve the efficiency and the moment of inertia only in a few numbers of iterations while limiting the stresses to a maximum value. Based on the large number of evaluated designs during the optimization, this paper provides design recommendations of a turbocharger radial turbine at least for a good preliminary design.

References

1.
Rohlik
,
H.
,
1975
, “
Radial Inflow Turbines
,” Report No. NASA SP 290.
2.
Glassman
,
A.
,
1976
,. “
Computer Program for Design Analysis of Radial Inflow Turbines
,” Report No. NASA TN D-8164.
3.
Whitfield
,
A.
,
1990
, “
The Preliminary Design of Radial Inflow Turbines
,”
J. Turbomach.
,
112
, pp.
50
57
.10.1115/1.2927420
4.
Chen
,
H.
, and
Baines
,
N.
,
1992
, “
Analytical Optimization Design of Radial and Mixed Flow Turbines
,”
J. Power Energy
,
206
, pp.
177
187
.10.1243/PIME_PROC_1992_206_028_02
5.
Chen
,
H.
, and
Baines
,
N.
,
1994
, “
The Aerodynamic Loading of Radial Mixed-Flow Turbines
,”
J. Mech. Sci.
,
36
, pp.
63
79
.10.1016/0020-7403(94)90007-8
6.
Barr
,
L.
,
Spence
,
S.
,
Thornhill
,
D.
, and
Eynon
,
P.
,
2008
. “
A Numerical and Experimental Performance Comparison of an 86 mm Radial and Back Swept Turbine
,”
ASME Turbo Expo 2009
, Paper No. GT2009-59366.
7.
Walkingshaw
,
J.
,
Spence
,
S.
,
Ehrhard
,
J.
, and
Thornhill
,
D.
An Investigation into Improving Off-Design Performance in a Turbocharger Turbine Utilizing Non-Radial Blading,
ASME Turbo Expo 2011
, Paper No. GT2011-45717.
8.
Whitfield
,
A.
, and
Baines
,
N.
,
1990
,
Design of Radial Turbomaschines
,
Longman Scientific & Technical
, UK and New York.
9.
Kammeyer
,
J.
,
Natkaniec
,
C.
, and
Seume
,
J.
,
2010
, “
Tip Leakage in Small Radial Turbines – Optimum Tip-Gap and Efficiency Loss Correlations
,”
ASME Turbo Expo 2010
, Paper No. GT2010-22680.
10.
Pierret
,
S.
,
1999
, “
Designing Turbomachinery Blades by Means of the Function Approximation Concept Based on Artificial Neural Network, Genetic Algorithm and the Navier-Stokes Equations
,” Ph.D. thesis,
von Karman Institute for Fluid Dynamics
, Belgium.
11.
Rini
,
P.
,
Alsalihi
,
Z.
, and
Van den Braembussche
,
R.
,
2001
, “
Evaluation of a Design Method for Radial Impellers Based on Artificial Neural Network and Genetic Algorithm
,”
Proceedings of the 5th ISAIF Conference
, pp.
535
543
.
12.
Cosentino
,
R.
,
Alsalihi
,
Z.
, and
Van den Braembussche
,
R.
,
2001
, “
Expert System for Radial Impeller Optimization
,”
Proceedings of the 4th European Conference on Turbomachinery
, pp.
481
490
.
13.
Verstraete
,
T.
,
2008
, “
Multidisciplinary Turbomachinery Component Optimization Considering Performance, Stress, and Internal Heat Transfer
,” Ph.D. thesis,
von Karman Institute for Fluid Dynamics – University of Gent
, Belgium.
14.
Storn
,
R.
, and
Price
,
K.
,
1997
, “
Differential Evolution – A Simple and Efficient Heuristic for Global Optimization Over Continuous Spaces
,”
Journal of Global Optimization
,
11
, pp.
341
359
.10.1023/A:1008202821328
15.
Montgomery
,
D.
,
2006
,
Design and Analysis of Experiments
,
Wiley
,
New York
.
16.
Casey
,
M.
,
1983
, “
A Computational Geometry for the Blades and Internal Flow Channels of Centrifugal Compressors
,”
J. Eng. Power
,
105
, pp.
288
295
.10.1115/1.3227414
17.
Farin
,
G.
,
1993
,
Curves and Surfaces for Computer Aided Geometric Design
,
Academic
,
New York
.
18.
Thompson
,
J.
,
Warsi
,
Z.
, and
Mastin
,
W.
,
2006
,
Numerical Grid Generation: Foundations and Applications
, Elsevier, New York.
19.
Arnone
,
A.
,
1994
, “
Viscous Analysis of Three-Dimensional Rotor Flow Using a Multigrid Method
,”
J. Turbomach.
,
116
, pp.
435
444
.10.1115/1.2929430
20.
Wilcox
,
D.
,
1993
,
Turbulence Modelling for CFD. DCW
.
Industries, Inc
., La Cañada, CA
21.
Joly
,
M.
,
Verstraete
,
T.
, and
Paniagua
,
G.
,
2010
, “
Attenuation of Vane Distortion in a Transonic Turbine Using Optimization Strategies, Part I – Methodology
,”
Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air
, Paper No. GT2010-22370.
22.
Dhondt
,
G.
, and
Wittig
,
K.
,
1998
, “
A Free Software Three-Dimensional Structural Finite Element Program
,” www.calculix.de.
23.
Tonon
,
F.
,
2004
, “
Explicit Exact Formulas for the 3-D Tetrahedron Inertia Tensor in Terms of its Vertex Coordinates
,”
J. Math. Stat.
,
1
, pp.
8
11
.10.3844/jmssp.2005.8.11
24.
Sieverding
,
C.
, 2011,
Advanced Course on Turbines
,
von Karman Institute for Fluid Dynamics
, Belgium.
You do not currently have access to this content.