Transition Modeling for Vortex Generating Jets on Low-Pressure Turbine Profiles

Steady blowing vortex generating jets (VGJ) on highly-loaded low-pressure turbine profiles have shown to be a promising way to decrease total pressure losses at low Reynolds-numbers by reducing laminar separation. In the present paper, the state of the art turbomachinery design code TRACE with RANS turbulence closure and coupled $γ-ReΘ$ transition model is applied to the prediction of typical aerodynamic design parameters of various VGJ configurations in steady simulations. High-speed cascade wind tunnel experiments for a wide range of Reynolds-numbers, two VGJ positions, and three jet blowing ratios are used for validation. Since the original transition model overpredicts separation and losses at $Re2is≤100·103$⁠, an extra mode for VGJ induced transition is introduced. Whereas the criterion for transition is modeled by a filtered Q vortex criterion the transition development itself is modeled by a reduction of the local transition-onset momentum-thickness Reynolds number. The new model significantly improves the quality of the computational results by capturing the corresponding local transition process in a physically reasonable way. This is shown to yield an improved quantitative prediction of surface pressure distributions and total pressure losses.