Rotating stall waves that travel against the direction of rotor rotation are reported for the first time and a new, low-order analytical approach to model centrifugal compressor stability is introduced. The model is capable of dealing with unsteady radially swirling flows and the dynamic effects of impeller-diffuser component interaction as it occurs in centrifugal compression systems. A simple coupling criterion is developed from first principles to explain the interaction mechanism important for system stability. The model findings together with experimental data explain the mechanism for first-ever observed backward traveling rotating stall in centrifugal compressors with vaned diffusers. Based on the low-order model predictions, an air injection scheme between the impeller and the vaned diffuser is designed for the NASA Glenn CC3 high-speed centrifugal compressor. The steady air injection experiments show an increase of 25% in surge-margin with an injection mass flow of 0.5% of the compressor mass flow. In addition, it is experimentally demonstrated that this injection scheme is robust to impeller tip-clearance effects and that a reduced number of injectors can be applied for similar gains in surge-margin. The results presented in this paper firmly establish the connection between the experimentally observed dynamic phenomena in the NASA CC3 centrifugal compressor and a first principles based coupling criterion. In addition, guidelines are given for the design of centrifugal compressors with enhanced stability.       Winner of the “Best Paper Award,” Turbomachinery Committee

1.
Hunziker
,
R.
, and
Gyarmathy
,
G.
,
1994
, “
The Operational Stability of a Centrifugal Compressor and Its Dependence on the Characteristics of the Subcomponents
,”
ASME J. Turbomach.
,
116
, pp.
250
259
.
2.
Lawless
,
P.
, and
Fleeter
,
S.
,
1995
, “
Rotating Stall Acoustic Signature in a Low-Speed Centrifugal Compressor: Part I—Vaneless Diffuser
,”
ASME J. Turbomach.
,
118
, pp.
87
96
.
3.
Abdelhamid, A., 1980, “Analysis of Rotating Stall in Vaneless Diffusers of Centrifugal Compressors,” ASME Paper 80-GT-184.
4.
Frigne, P., and Van Den Braembussche, R., 1980, “A Theoretical Model for Rotating Stall in the Vaneless Diffuser of a Centrifugal Compressor,” ASME Paper 84-GT-204.
5.
Frigne
,
P.
, and
Van Den Braembussche
,
R.
,
1984
, “
Distinction Between Different Types of Impeller and Diffuser Rotating Stall in a Centrifugal Compressor With Vaneless Diffuser
,”
ASME J. Eng. Gas Turbines Power
,
106
, pp.
468
474
.
6.
Lawless, P., and Fleeter, S., 1991, “Active Unsteady Aerodynamic Suppression of Rotating Stall in an Incompressible Flow Centrifugal Compressor With Vaned Diffuser,” Paper No. AIAA-91-1898.
7.
Lawless, P., and Fleeter, S., 1993, “Rotating Stall Acoustic Signature in a Low-Speed Centrifugal Compressor: Part II—Vaned Diffuser,” ASME Paper 93-GT-254.
8.
Oakes, W., Lawless, P., and Fleeter, S., 1999, “Instability Pathology of a High Speed Centrifugal Compressor,” ASME Paper 99-GT-415.
9.
Pinsley
,
J.
,
Guenette
,
G.
,
Epstein
,
A.
, and
Greitzer
,
E.
,
1991
, “
Active Stabilization of Centrifugal Compressor Surge
,”
ASME J. Turbomach.
,
113
, pp.
723
732
.
10.
Gysling
,
D.
,
Dugundji
,
J.
,
Greitzer
,
E.
, and
Epstein
,
A.
,
1991
, “
Dynamic Control of Centrifugal Compressor Surge Using Tailored Structures
,”
ASME J. Turbomach.
,
113
, pp.
710
722
.
11.
Ffowcs Williams
,
J.
,
Harper
,
M.
, and
Allwright
,
D. J.
,
1993
, “
Active Stabilization of Compressor Instability and Surge in a Working Engine
,”
ASME J. Turbomach.
,
115
, pp.
68
75
.
12.
Nelson
,
E.
,
Paduano
,
J.
, and
Epstein
,
A.
,
2000
, “
Active Stabilization of Surge in an Axicentrifugal Turboshaft Engine
,”
ASME J. Turbomach.
,
122
, pp.
485
493
.
13.
Stein, A., Niazi, S., and Sankar, L., 2000, “Computational Analysis of Centrifugal Compressor Surge Control Using Air Injection,” AIAA Paper No. 2000-3501.
14.
McKain, T., and Holbrook, G., 1997, “Coordinates for a High Performance 4:1 Presure Ratio Centrifugal Compressor,” NASA, Technical Report CR-204134.
15.
Moore
,
F.
, and
Greitzer
,
E.
,
1986
, “
A Theory of Post-Stall Transients in Axial Compressors: Part I—Development of the Equations
,”
ASME J. Eng. Gas Turbines Power
,
108
, pp.
68
76
.
16.
Longley
,
J.
,
1994
, “
A Review of Nonsteady Flow Models for Compressor Stability
,”
ASME J. Turbomach.
,
117
, pp.
202
215
.
17.
Spakovszky, Z., 2000, “Applications of Axial and Radial Compressor Dynamic System Modeling,” Ph.D. thesis, Department of Aeronautics and Astronautics, MIT, Cambridge, MA.
18.
Wood, J., 2000, personal communication, NASA Glenn Research Center.
19.
Rodgers, C., 1982, “The Performance of Centrifugal Compressor Channel Diffusers,” ASME Paper 82-GT-10.
20.
Stenning
,
A.
,
1980
, “
Rotating Stall and Surge
,”
ASME J. Fluids Eng.
,
102
, pp.
14
20
.
21.
Greitzer
,
E.
,
1976
, “
Surge and Rotating Stall in Axial Compressors; Part I: Theoretical Compression System Model
,”
ASME J. Eng. Power
,
98
, pp.
190
198
.
22.
Wernet
,
M.
,
Bright
,
M.
, and
Skoch
,
G.
,
2001
, “
An Investigation of Surge in a High-Speed Centrifugal Compressor Using Digital PIV
,”
ASME J. Turbomach.
,
123
, pp.
418
428
.
23.
Senoo
,
Y.
,
Kinoshita
,
Y.
, and
Ishida
,
M.
,
1977
, “
Asymmetric Flow in Vaneless Diffusers of Centrifugal Blowers
,”
ASME J. Fluids Eng.
,
99
, pp.
104
114
.
24.
Dawes
,
W.
,
1995
, “
A Simulation of the Unsteady Interaction of a Centrifugal Impeller With Its Vaned Diffuser: Flow Analysis
,”
ASME J. Turbomach.
,
117
, pp.
213
222
.
25.
Skoch, G., Prahst, P., Wernet, M., Wood, J., and Strazisar, A., 1997, “Laser Anemometer Measurements of the Flow Field in a 4:1 Pressure Ratio Centrifugal Impeller,” ASME Turbo Expo, Orlando, FL.
26.
Larosiliere, L., Skoch, G., and Prahst, P., 1997, “Aerodynamic Synthesis of a Centrifugal Impeller Using CFD and Measurements,” AIAA, ASME, SAE and ASEE Joint Propulsion Conference, Seattle, WA.
27.
Berndt, R. G., 1995, “Actuation for Rotating Stall Control of High Speed Compressors,” Master’s thesis, Department of Aeronautics and Astronautics, MIT, Cambridge, MA.
28.
Felsing
,
G.
, and
Moller
,
P.
,
1969
, “
Coanda Flow Over a Circular Cylinder With Injection Normal to the Surface
,”
AIAA J.
,
7
(
5
), pp.
842
846
.
29.
Strazisar, A., 2000, personal communication, NASA Glenn Research Center.
30.
Suder, K., Hathaway, M., Thorp, S., Strazisar, A., and Bright, M., 2000, “Compressor Stability Enhancement Using Discrete Tip Injection,” ASME Turbo Expo, Munich, Germany.
You do not currently have access to this content.