Skip Nav Destination

Issues

Select Decade

Select Year

Issue

Volume 133, Issue 1

January 2011

Previous Issue
Next Issue

ISSN 0742-4787

EISSN 1528-8897

In this Issue

Research Papers
Technical Briefs

Research Papers

Applications

Three-Dimensional Heat Transfer Analysis of Pin-Bushing System With Oscillatory Motion: Theory and Experiment

Jun Wen, M. M. Khonsari, D. Y. Hua

J. Tribol. January 2011, 133(1): 011101. doi: https://doi.org/10.1115/1.4002729

Abstract

View articletitled, Three-Dimensional Heat Transfer Analysis of Pin-Bushing System With Oscillatory Motion: Theory and Experiment

Open the PDF for in another window

Topics: Bushings , Heat , Heat transfer , Temperature , Stress , Oscillations , Journal bearings

Dynamic Modeling of Rolling Element Bearings With Surface Contact Defects Using Bond Graphs

Mohsen Nakhaeinejad, Michael D. Bryant

J. Tribol. January 2011, 133(1): 011102. doi: https://doi.org/10.1115/1.4003088

Abstract

View articletitled, Dynamic Modeling of Rolling Element Bearings With Surface Contact Defects Using Bond Graphs

Open the PDF for in another window

Topics: Bearings , Modeling , Rolling bearings , Stress , Vibration , Simulation , Multibody dynamics , Dynamics (Mechanics) , Shapes , Stiffness

Coatings & Solid Lubricants

Microstructure and Tribological Properties of ${ZrB}_{2}$ -Containing Composite Coating Produced on Pure Ti Substrate by Laser Surface Alloying

Chun Guo, Jiansong Zhou, Jierong Zhao, Jianmin Chen

J. Tribol. January 2011, 133(1): 011301. doi: https://doi.org/10.1115/1.4003066

Abstract

View articletitled, Microstructure and Tribological Properties of <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><msub><mrow><mtext>ZrB</mtext></mrow><mn>2</mn></msub></mrow></math></span>-Containing Composite Coating Produced on Pure Ti Substrate by Laser Surface Alloying

Open the PDF for in another window

Topics: Coating processes , Coatings , Composite materials , Lasers , Stress , Wear

Contact Mechanics

Elastic-Plastic Microcontact Model for Elliptical Contact Areas and Its Application to a Treillis Point in Overhead Electrical Conductors

Frédéric Lévesque, Sylvain Goudreau, Louis Cloutier

J. Tribol. January 2011, 133(1): 011401. doi: https://doi.org/10.1115/1.4002953

Abstract

View articletitled, Elastic-Plastic Microcontact Model for Elliptical Contact Areas and Its Application to a Treillis Point in Overhead Electrical Conductors

Open the PDF for in another window

Topics: Finite element analysis , Wire , Fatigue , Stress

Elastohydrodynamic Lubrication

Permeation of Lubricant Trapped Within Pocket Into Real Contact Area on the End Surface of Cylinder

Akira Azushima, Akira Yanagida, Shojiro Tani

J. Tribol. January 2011, 133(1): 011501. doi: https://doi.org/10.1115/1.4002745

Abstract

View articletitled, Permeation of Lubricant Trapped Within Pocket Into Real Contact Area on the End Surface of Cylinder

Open the PDF for in another window

Topics: Cylinders , Finite element analysis , Hydrostatic pressure , Lubricants , Fluorescence , Friction , Compressibility , Pressure

Friction & Wear

A Study on Modified Mechanical and Wear Characteristics of Epoxy-Particulate Filled Homogenous Composites and Their Functionally Graded Materials

Siddhartha, Amar Patnaik, Alok Satapathy, Amba D. Bhatt

J. Tribol. January 2011, 133(1): 011601. doi: https://doi.org/10.1115/1.4002543

Abstract

View articletitled, A Study on Modified Mechanical and Wear Characteristics of Epoxy-Particulate Filled Homogenous Composites and Their Functionally Graded Materials

Open the PDF for in another window

Topics: Composite materials , Epoxy resins , Particulate matter , Stress , Wear , Dust , Cement kilns , Fillers (Materials) , Casting , Functionally graded materials

Hydrodynamic Lubrication

Dynamic Characteristics of Aerostatic Porous Journal Bearings With a Surface-Restricted Layer

Yuta Otsu, Masaaki Miyatake, Shigeka Yoshimoto

J. Tribol. January 2011, 133(1): 011701. doi: https://doi.org/10.1115/1.4002730

Abstract

View articletitled, Dynamic Characteristics of Aerostatic Porous Journal Bearings With a Surface-Restricted Layer

Open the PDF for in another window

Topics: Bearings , Graphite , Journal bearings , Permeability , Porous materials , Stiffness , Metals , Clearances (Engineering) , Damping

An Analytical Complete Model of Tilting-Pad Journal Bearing Considering Pivot Stiffness and Damping

Zhiyong Yan, Yi Lu, Tiesheng Zheng

J. Tribol. January 2011, 133(1): 011702. doi: https://doi.org/10.1115/1.4002070

Abstract

View articletitled, An Analytical Complete Model of Tilting-Pad Journal Bearing Considering Pivot Stiffness and Damping

Open the PDF for in another window

Topics: Damping , Displacement , Equilibrium (Physics) , Journal bearings , Rotors , Stiffness , Jacobian matrices , Stability , Bearings

Three-Dimensional Thermohydrodynamic Analysis of a Wet Clutch With Consideration of Grooved Friction Surfaces

J. Y. Jang, M. M. Khonsari, Rikard Maki

J. Tribol. January 2011, 133(1): 011703. doi: https://doi.org/10.1115/1.4003019

Abstract

View articletitled, Three-Dimensional Thermohydrodynamic Analysis of a Wet Clutch With Consideration of Grooved Friction Surfaces

Open the PDF for in another window

Topics: Disks , Film thickness , Friction , Friction materials , Pressure , Shapes , Stress , Temperature , Torque , Permeability

Enhancement of Reversible Rotation Journal Bearing Performance Using Elliptical Grooves

Ruey-Hor Yen, Chien-Yu Chen

J. Tribol. January 2011, 133(1): 011704. doi: https://doi.org/10.1115/1.4003148

Abstract

View articletitled, Enhancement of Reversible Rotation Journal Bearing Performance Using Elliptical Grooves

Open the PDF for in another window

Topics: Bearings , Journal bearings , Pressure , Rotation , Stiffness , Stress , Fluid films , Stability , Geometry

Mixed and Boundary Lubrication

Electrogalvanized Low Carbon Steel Adhesion Tendency in Friction Processes Under Mixed Lubrication Regime

V. Miguel, J. Coello, M. C. Manjabacas, A. Calatayud, C. Ferrer, A. Martínez

J. Tribol. January 2011, 133(1): 012101. doi: https://doi.org/10.1115/1.4003114

Abstract

View articletitled, Electrogalvanized Low Carbon Steel Adhesion Tendency in Friction Processes Under Mixed Lubrication Regime

Open the PDF for in another window

Topics: Adhesion , Drainage , Friction , Lubrication , Pressure , Lubricants , Steel , High pressure (Physics)

Other (Seals, Manufacturing)

An Experimental-Numerical Procedure for Stuffing Box Packing Characterization and Leak Tests

Mohammed Diany, Abdel-Hakim Bouzid

J. Tribol. January 2011, 133(1): 012201. doi: https://doi.org/10.1115/1.4002929

Abstract

View articletitled, An Experimental-Numerical Procedure for Stuffing Box Packing Characterization and Leak Tests

Open the PDF for in another window

Topics: Leakage , Packing (Shipments) , Packings (Cushioning) , Pressure , Stress

Surface Defect Generation and Recovery in Cold Rolling of Stainless Steel Strips

E. Mancini, M. Sasso, D. Amodio, R. Ferretti, F. Sanfilippo

J. Tribol. January 2011, 133(1): 012202. doi: https://doi.org/10.1115/1.4002218

Abstract

View articletitled, Surface Defect Generation and Recovery in Cold Rolling of Stainless Steel Strips

Open the PDF for in another window

Topics: Cold rolling , Finite element methods , Finite element model , Lubricants , Lubrication , Pressure , Stainless steel , Strips , Surface roughness , Tension

Technical Briefs

Influence of Inclination Angle and Machining Direction on Friction and Transfer Layer Formation

Pradeep L. Menezes, Kishore, Satish V. Kailas, Michael R. Lovell

J. Tribol. January 2011, 133(1): 014501. doi: https://doi.org/10.1115/1.4002604

Abstract

View articletitled, Influence of Inclination Angle and Machining Direction on Friction and Transfer Layer Formation

Open the PDF for in another window

Topics: Friction , Grinding , Pins (Engineering) , Plates (structures) , Steel , Machining , Stress , Surface roughness , Magnesium alloys

Particle Size Effects on Slurry Erosion of 5117 steels

A. Abouel-Kasem

J. Tribol. January 2011, 133(1): 014502. doi: https://doi.org/10.1115/1.4002605

Abstract

View articletitled, Particle Size Effects on Slurry Erosion of 5117 steels

Open the PDF for in another window

Topics: Erosion , Particle size , Particulate matter , Slurries , Steel , Shapes , Kinetic energy , Wear

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Studies on tribological characteristics and wear mechanisms of (TiN+TiC) hybrid nanocomposite claddings deposited on TC4 grade titanium alloy substrate by the TIG cladding process

J. Tribol

Static Characteristics of Hybrid Water-Lubricated Herringbone Groove Journal Bearing

J. Tribol

Wear micromechanics, mechanisms and wear map of Al-12.6Si-0.25Fe-_XMn alloy: The role of Al₁₅(Mn,Fe)₃Si₂ intermetallic and microstructure modification

J. Tribol

An anti-erosion cylindrical surface incorporating two bionic elements

J. Tribol

Machine Learning in Wear Prediction

J. Tribol

Research Papers

Applications

Three-Dimensional Heat Transfer Analysis of Pin-Bushing System With Oscillatory Motion: Theory and Experiment

Dynamic Modeling of Rolling Element Bearings With Surface Contact Defects Using Bond Graphs

Coatings & Solid Lubricants

Microstructure and Tribological Properties of ${ZrB}_{2}$ -Containing Composite Coating Produced on Pure Ti Substrate by Laser Surface Alloying

Contact Mechanics

Elastic-Plastic Microcontact Model for Elliptical Contact Areas and Its Application to a Treillis Point in Overhead Electrical Conductors

Elastohydrodynamic Lubrication

Permeation of Lubricant Trapped Within Pocket Into Real Contact Area on the End Surface of Cylinder

Friction & Wear

A Study on Modified Mechanical and Wear Characteristics of Epoxy-Particulate Filled Homogenous Composites and Their Functionally Graded Materials

Hydrodynamic Lubrication

Dynamic Characteristics of Aerostatic Porous Journal Bearings With a Surface-Restricted Layer

An Analytical Complete Model of Tilting-Pad Journal Bearing Considering Pivot Stiffness and Damping

Three-Dimensional Thermohydrodynamic Analysis of a Wet Clutch With Consideration of Grooved Friction Surfaces

Enhancement of Reversible Rotation Journal Bearing Performance Using Elliptical Grooves

Mixed and Boundary Lubrication

Electrogalvanized Low Carbon Steel Adhesion Tendency in Friction Processes Under Mixed Lubrication Regime

Other (Seals, Manufacturing)

An Experimental-Numerical Procedure for Stuffing Box Packing Characterization and Leak Tests

Surface Defect Generation and Recovery in Cold Rolling of Stainless Steel Strips

Technical Briefs

Influence of Inclination Angle and Machining Direction on Friction and Transfer Layer Formation

Particle Size Effects on Slurry Erosion of 5117 steels

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Applications

Coatings & Solid Lubricants

Contact Mechanics

Elastohydrodynamic Lubrication

Friction & Wear

Hydrodynamic Lubrication

Mixed and Boundary Lubrication

Other (Seals, Manufacturing)

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only