Volume 128 Issue 4 | J. Tribol. | ASME Digital Collection

Skip Nav Destination

Volume 128, Issue 4

October 2006

ISSN 0742-4787

EISSN 1528-8897

Research Papers

Large-Scale Evaluation of Constrained Bearing Elements Made of Thermosetting Polyester Resin and Polyester Fabric Reinforcement

P. Samyn, W. Van Paepegem, J. S. Leendertz, A. Gerber, L. Van Schepdael, J. Degrieck, P. De Baets

J. Tribol. October 2006, 128(4): 681–696. doi: https://doi.org/10.1115/1.2345413

Abstract

View articletitled, Large-Scale Evaluation of Constrained Bearing Elements Made of Thermosetting Polyester Resin and Polyester Fabric Reinforcement

Open the PDF for in another window

Topics: Composite materials , Deformation , Friction , Polyester fabrics , Steel , Wear , Stress , Bearings , Coatings , Fibers

Effect of Roughness Parameter and Grinding Angle on Coefficient of Friction When Sliding of Al–Mg Alloy Over EN8 Steel

Pradeep L. Menezes, Kishore, Satish V. Kailas

J. Tribol. October 2006, 128(4): 697–704. doi: https://doi.org/10.1115/1.2345401

Abstract

View articletitled, Effect of Roughness Parameter and Grinding Angle on Coefficient of Friction When Sliding of Al–Mg Alloy Over EN8 Steel

Open the PDF for in another window

Topics: Friction , Grinding , Magnesium alloys , Steel , Surface roughness

Slider Pitch Moment Associated With Dimple Friction

Li-Yan Zhu, Chao-Hui Yang, Yen Fu, Ellis Cha

J. Tribol. October 2006, 128(4): 705–710. doi: https://doi.org/10.1115/1.2345394

Abstract

View articletitled, Slider Pitch Moment Associated With Dimple Friction

Open the PDF for in another window

Topics: Bending (Stress) , Cantilevers , Disks , Friction , Levers , Stiffness , Stress

Tribological Characteristics of DLC-Coated Alumina at High Temperatures

K. Y. Lee, R. Wei

J. Tribol. October 2006, 128(4): 711–717. doi: https://doi.org/10.1115/1.2345395

Abstract

View articletitled, Tribological Characteristics of DLC-Coated Alumina at High Temperatures

Open the PDF for in another window

Topics: Ceramics , Coatings , Diamond films , Friction , High temperature , Plasmas (Ionized gases) , Temperature , Tribology , Wear , Diamonds

Finite Element Analysis of Thermoelastodynamic Instability Involving Frictional Heating

Yun-Bo Yi

J. Tribol. October 2006, 128(4): 718–724. doi: https://doi.org/10.1115/1.2345412

Abstract

View articletitled, Finite Element Analysis of Thermoelastodynamic Instability Involving Frictional Heating

Open the PDF for in another window

Topics: Boundary-value problems , Eigenvalues , Finite element analysis , Thermoelasticity , Heating , Temperature , Displacement

Determination of Steady-State Adhesive Wear Rate

L. J. Yang

J. Tribol. October 2006, 128(4): 725–734. doi: https://doi.org/10.1115/1.2345410

Abstract

View articletitled, Determination of Steady-State Adhesive Wear Rate

Open the PDF for in another window

Topics: Steady state , Wear , Transients (Dynamics)

Influence of Microstructure in Partial-Slip Fretting Contacts Based Upon Two-Dimensional Crystal Plasticity Simulations

C.-H. Goh, D. L. McDowell, R. W. Neu

J. Tribol. October 2006, 128(4): 735–744. doi: https://doi.org/10.1115/1.2345414

Abstract

View articletitled, Influence of Microstructure in Partial-Slip Fretting Contacts Based Upon Two-Dimensional Crystal Plasticity Simulations

Open the PDF for in another window

Topics: Crystals , Engineering simulation , Finite element analysis , Grain size , Plasticity , Shapes , Simulation , Deformation , Texture (Materials) , Titanium alloys

Validation of the Stress Predictions in Rolling EHL Contacts Having In-Line Roughness Using the Inverse Method

C. J. Hooke, K. Y. Li

J. Tribol. October 2006, 128(4): 745–752. doi: https://doi.org/10.1115/1.2345396

Abstract

View articletitled, Validation of the Stress Predictions in Rolling EHL Contacts Having In-Line Roughness Using the Inverse Method

Open the PDF for in another window

Topics: Stress , Surface roughness

Roughness Amplitude Reduction Under Non-Newtonian EHD Lubrication Conditions

A. D. Chapkov, C. H. Venner, A. A. Lubrecht

J. Tribol. October 2006, 128(4): 753–760. doi: https://doi.org/10.1115/1.2345398

Abstract

View articletitled, Roughness Amplitude Reduction Under Non-Newtonian EHD Lubrication Conditions

Open the PDF for in another window

Topics: Lubricants , Pressure , Surface roughness , Film thickness , Lubrication

Dynamic Finite Element Simulations for Understanding Wheel-Rail Contact Oscillatory States Occurring Under Sliding Conditions

A. Saulot, L. Baillet

J. Tribol. October 2006, 128(4): 761–770. doi: https://doi.org/10.1115/1.2345402

Abstract

View articletitled, Dynamic Finite Element Simulations for Understanding Wheel-Rail Contact Oscillatory States Occurring Under Sliding Conditions

Open the PDF for in another window

Topics: Friction , Rails , Simulation , Stress , Wheels , Finite element analysis , Deformation , Transients (Dynamics)

Theoretical Investigation in Thermoelastohydrodynamic Lubrication With Non-Newtonian Lubricants Under Sudden Load Change

M. Mongkolwongrojn, C. Aiumpornsin, K. Thammakosol

J. Tribol. October 2006, 128(4): 771–777. doi: https://doi.org/10.1115/1.2345393

Abstract

View articletitled, Theoretical Investigation in Thermoelastohydrodynamic Lubrication With Non-Newtonian Lubricants Under Sudden Load Change

Open the PDF for in another window

Topics: Film thickness , Lubricants , Lubrication , Pressure , Stress , Transients (Dynamics) , Particulate matter , Elasticity , Friction

Mixed Elastohydrodynamic Lubrication in a Partial Journal Bearing—Comparison Between Deterministic and Stochastic Models

Mihai B. Dobrica, Michel Fillon, Patrick Maspeyrot

J. Tribol. October 2006, 128(4): 778–788. doi: https://doi.org/10.1115/1.2345404

Abstract

View articletitled, Mixed Elastohydrodynamic Lubrication in a Partial Journal Bearing—Comparison Between Deterministic and Stochastic Models

Open the PDF for in another window

Topics: Bearings , Film thickness , Journal bearings , Pressure , Surface roughness , Lubrication , Computer simulation , Deformation

The Stribeck Curve: Experimental Results and Theoretical Prediction

Xiaobin Lu, M. M. Khonsari, E. R. M. Gelinck

J. Tribol. October 2006, 128(4): 789–794. doi: https://doi.org/10.1115/1.2345406

Abstract

View articletitled, The Stribeck Curve: Experimental Results and Theoretical Prediction

Open the PDF for in another window

Topics: Bearings , Friction , Lubrication , Stress , Surface roughness , Temperature

Viscosity Ratio Effect in the Emulsion Lubrication of Soft EHL Contact

J. de Vicente, H. A. Spikes, J. R. Stokes

J. Tribol. October 2006, 128(4): 795–800. doi: https://doi.org/10.1115/1.2345400

Abstract

View articletitled, Viscosity Ratio Effect in the Emulsion Lubrication of Soft EHL Contact

Open the PDF for in another window

Topics: Emulsions , Friction , Viscosity , Water , Lubrication , Elastomers

Design Optimization of Ultra-Low Flying Head-Disk Interfaces Using an Improved Elastic-Plastic Rough Surface Model

Allison Y. Suh, Sung-Chang Lee, Andreas A. Polycarpou

J. Tribol. October 2006, 128(4): 801–810. doi: https://doi.org/10.1115/1.2345399

Abstract

View articletitled, Design Optimization of Ultra-Low Flying Head-Disk Interfaces Using an Improved Elastic-Plastic Rough Surface Model

Open the PDF for in another window

Topics: Adhesives , Design , Disks , Friction , Surface roughness , Adhesion , Pressure , Optimization , Vibration

Friction Effect on Loading Process and Multiple Stable Flying States of Air Bearing Sliders

Qinghua Zeng, Fu-Ying Huang

J. Tribol. October 2006, 128(4): 811–816. doi: https://doi.org/10.1115/1.2345397

Abstract

View articletitled, Friction Effect on Loading Process and Multiple Stable Flying States of Air Bearing Sliders

Open the PDF for in another window

Topics: Disks , Friction , Air bearings , Simulation

Nonlinear Modeling of Mechanical Gas Face Seal Systems Using Proper Orthogonal Decomposition

Haojiong Zhang, Brad A. Miller, Robert G. Landers

J. Tribol. October 2006, 128(4): 817–827. doi: https://doi.org/10.1115/1.2345405

Abstract

View articletitled, Nonlinear Modeling of Mechanical Gas Face Seal Systems Using Proper Orthogonal Decomposition

Open the PDF for in another window

Topics: Clearances (Engineering) , Modeling , Pressure , Principal component analysis , Simulation , Stators , Compressibility , Equilibrium (Physics)

The Influence of Adhesion and Sub-Newton Pull-Off Forces on the Release of Objects in Outer Space

M. Benedetti, D. Bortoluzzi, M. Da Lio, V. Fontanari

J. Tribol. October 2006, 128(4): 828–840. doi: https://doi.org/10.1115/1.2345407

Abstract

View articletitled, The Influence of Adhesion and Sub-Newton Pull-Off Forces on the Release of Objects in Outer Space

Open the PDF for in another window

Topics: Adhesion , Adhesives , Stress , Surface roughness , Separation (Technology) , Tribology , Finite element analysis , Gravity (Force) , Metals

Adhesive Effects on Dynamic Friction for Unlubricated Rough Planar Surfaces

Xi Shi, Andreas A. Polycarpou

J. Tribol. October 2006, 128(4): 841–850. doi: https://doi.org/10.1115/1.2345392

Abstract

View articletitled, Adhesive Effects on Dynamic Friction for Unlubricated Rough Planar Surfaces

Open the PDF for in another window

Topics: Adhesion , Sliding friction , Surface roughness , Friction

Generation of Composite Surfaces With Bimodal Distribution and Contact Analysis for Optimum Tribological Performance

Tae Wan Kim, Bharat Bhushan

J. Tribol. October 2006, 128(4): 851–864. doi: https://doi.org/10.1115/1.2345408

Abstract

View articletitled, Generation of Composite Surfaces With Bimodal Distribution and Contact Analysis for Optimum Tribological Performance

Open the PDF for in another window

Topics: Composite materials , Particulate matter , Surface roughness , Gaussian distribution

Surface Modification of AFM ${Si}_{3} N_{4}$ Probes for Adhesion/Friction Reduction and Imaging Improvement

Zhenhua Tao, Bharat Bhushan

J. Tribol. October 2006, 128(4): 865–875. doi: https://doi.org/10.1115/1.2345411

Abstract

View articletitled, Surface Modification of AFM <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><msub><mi>Si</mi><mn>3</mn></msub><msub><mi mathvariant="normal">N</mi><mn>4</mn></msub></mrow></math> Probes for Adhesion/Friction Reduction and Imaging Improvement

Open the PDF for in another window

Topics: Adhesion , Atomic force microscopy , Coatings , Friction , Probes , Resolution (Optics) , Wear , Adhesives

Modeling of Elastic/Plastic Contact Between Nominally Flat Rough Surfaces Using an $n$ -Point Asperity Model

A. Hariri, J. W. Zu, R. Ben Mrad

J. Tribol. October 2006, 128(4): 876–885. doi: https://doi.org/10.1115/1.2345409

Abstract

View articletitled, Modeling of Elastic/Plastic Contact Between Nominally Flat Rough Surfaces Using an <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>n</mi></mrow></math>-Point Asperity Model

Open the PDF for in another window

Topics: Deformation , Stress , Surface roughness , Gaussian distribution , Computer simulation

Technical Briefs

Contact of Coated Systems Under Sliding Conditions

Lifeng Ma, Alexander M. Korsunsky, Kun Sun

J. Tribol. October 2006, 128(4): 886–890. doi: https://doi.org/10.1115/1.2345415

Abstract

View articletitled, Contact of Coated Systems Under Sliding Conditions

Open the PDF for in another window

Topics: Coatings , Contact mechanics , Elasticity , Integral equations , Numerical analysis , Traction , Friction , Stress

Heat Treatment and Wear Characteristics of ${Al}_{2} O_{3}$ and TiC Particulate Reinforced AA6063 Al Alloy Hybrid Composites

M. Abdel Aziz, T. S. Mahmoud, Z. I. Zaki, A. M. Gaafer

J. Tribol. October 2006, 128(4): 891–894. doi: https://doi.org/10.1115/1.2345416

Abstract

View articletitled, Heat Treatment and Wear Characteristics of <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><msub><mi mathvariant="normal">Al</mi><mn>2</mn></msub><msub><mi mathvariant="normal">O</mi><mn>3</mn></msub></mrow></math> and TiC Particulate Reinforced AA6063 Al Alloy Hybrid Composites

Open the PDF for in another window

Topics: Alloys , Aluminum alloys , Composite materials , Heat treating (Metalworking) , Particulate matter , Wear , Ceramics

A Tribological Comparison of Pure and Boronized Chromium

R. Ribeiro, S. Ingole, M. Usta, C. Bindal, A. H. Ucisik, H. Liang

J. Tribol. October 2006, 128(4): 895–897. doi: https://doi.org/10.1115/1.2345417

Abstract

View articletitled, A Tribological Comparison of Pure and Boronized Chromium

Open the PDF for in another window

Topics: Corrosion resistance , Friction , Tribology , Wear , Water , Fluids , Metals , Bearing steel

Two-Dimensional Adaptive-Surface Elasto-Plastic Asperity Contact Model

Tianxiang Liu, Geng Liu, Qin Xie, Q. Jane Wang

J. Tribol. October 2006, 128(4): 898–903. doi: https://doi.org/10.1115/1.2345418

Abstract

View articletitled, Two-Dimensional Adaptive-Surface Elasto-Plastic Asperity Contact Model

Open the PDF for in another window

Topics: Errors , Pressure , Surface roughness , Stress , Contact mechanics

Low Friction and High Load Support Capacity of Slider Bearing With a Mixed Slip Surface

C. W. Wu, G. J. Ma, P. Zhou, C. D. Wu

J. Tribol. October 2006, 128(4): 904–907. doi: https://doi.org/10.1115/1.2345419

Abstract

View articletitled, Low Friction and High Load Support Capacity of Slider Bearing With a Mixed Slip Surface

Open the PDF for in another window

Topics: Friction , Lubrication , Slider bearings , Stress , Pressure , Fluids

Elliptic Elastic Contact Between High Order Symmetrical Surfaces

Emanuel N. Diaconescu

J. Tribol. October 2006, 128(4): 908–914. doi: https://doi.org/10.1115/1.2345420

Abstract

View articletitled, Elliptic Elastic Contact Between High Order Symmetrical Surfaces

Open the PDF for in another window

Topics: Displacement , Polynomials , Pressure , Symmetry (Physics) , Elastic half space

Visualization and Measurement of Contact Area by Reflectivity

Emanuel Diaconescu, Marilena Glovnea

J. Tribol. October 2006, 128(4): 915–917. doi: https://doi.org/10.1115/1.2345421

Abstract

View articletitled, Visualization and Measurement of Contact Area by Reflectivity

Open the PDF for in another window

Topics: Reflectance , Lasers , Sapphire

Research Papers

Large-Scale Evaluation of Constrained Bearing Elements Made of Thermosetting Polyester Resin and Polyester Fabric Reinforcement

Effect of Roughness Parameter and Grinding Angle on Coefficient of Friction When Sliding of Al–Mg Alloy Over EN8 Steel

Slider Pitch Moment Associated With Dimple Friction

Tribological Characteristics of DLC-Coated Alumina at High Temperatures

Finite Element Analysis of Thermoelastodynamic Instability Involving Frictional Heating

Determination of Steady-State Adhesive Wear Rate

Influence of Microstructure in Partial-Slip Fretting Contacts Based Upon Two-Dimensional Crystal Plasticity Simulations

Validation of the Stress Predictions in Rolling EHL Contacts Having In-Line Roughness Using the Inverse Method

Roughness Amplitude Reduction Under Non-Newtonian EHD Lubrication Conditions

Dynamic Finite Element Simulations for Understanding Wheel-Rail Contact Oscillatory States Occurring Under Sliding Conditions

Theoretical Investigation in Thermoelastohydrodynamic Lubrication With Non-Newtonian Lubricants Under Sudden Load Change

Mixed Elastohydrodynamic Lubrication in a Partial Journal Bearing—Comparison Between Deterministic and Stochastic Models

The Stribeck Curve: Experimental Results and Theoretical Prediction

Viscosity Ratio Effect in the Emulsion Lubrication of Soft EHL Contact

Design Optimization of Ultra-Low Flying Head-Disk Interfaces Using an Improved Elastic-Plastic Rough Surface Model

Friction Effect on Loading Process and Multiple Stable Flying States of Air Bearing Sliders

Nonlinear Modeling of Mechanical Gas Face Seal Systems Using Proper Orthogonal Decomposition

The Influence of Adhesion and Sub-Newton Pull-Off Forces on the Release of Objects in Outer Space

Adhesive Effects on Dynamic Friction for Unlubricated Rough Planar Surfaces

Generation of Composite Surfaces With Bimodal Distribution and Contact Analysis for Optimum Tribological Performance

Surface Modification of AFM ${Si}_{3} N_{4}$ Probes for Adhesion/Friction Reduction and Imaging Improvement

Modeling of Elastic/Plastic Contact Between Nominally Flat Rough Surfaces Using an $n$ -Point Asperity Model

Technical Briefs

Contact of Coated Systems Under Sliding Conditions

Heat Treatment and Wear Characteristics of ${Al}_{2} O_{3}$ and TiC Particulate Reinforced AA6063 Al Alloy Hybrid Composites

A Tribological Comparison of Pure and Boronized Chromium

Two-Dimensional Adaptive-Surface Elasto-Plastic Asperity Contact Model

Low Friction and High Load Support Capacity of Slider Bearing With a Mixed Slip Surface

Elliptic Elastic Contact Between High Order Symmetrical Surfaces

Visualization and Measurement of Contact Area by Reflectivity

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only