Volume 126 Issue 3 | J. Tribol. | ASME Digital Collection

Skip Nav Destination

Volume 126, Issue 3

July 2004

ISSN 0742-4787

EISSN 1528-8897

Technical Papers

The Effect of Dent Size on the Pressure Distribution and Failure Location in Dry Point Frictionless Rolling Contacts

M. B. Howell, C. A. Rubin, G. T. Hahn

J. Tribol. July 2004, 126(3): 413–421. doi: https://doi.org/10.1115/1.1692053

Abstract

View articletitled, The Effect of Dent Size on the Pressure Distribution and Failure Location in Dry Point Frictionless Rolling Contacts

Open the PDF for in another window

Topics: Deformation , Failure , Finite element analysis , Fracture (Materials) , Pressure , Rolling contact , Simulation , Stress , Nucleation (Physics) , Shear (Mechanics)

A Model for Temperature Rise of Polishing Process Considering Effects of Polishing Pad and Abrasive

Jeng-Haur Horng, Yeau-Ren Jeng, Chun-Liang Chen

J. Tribol. July 2004, 126(3): 422–429. doi: https://doi.org/10.1115/1.1705665

Abstract

View articletitled, A Model for Temperature Rise of Polishing Process Considering Effects of Polishing Pad and Abrasive

Open the PDF for in another window

Topics: Particulate matter , Polishing , Temperature , Particle size , Surface roughness

A Two-Dimensional Thermoelastic Rough Surface Contact Model

Yuan Lin, Graduate Research Assistant, Timothy C. Ovaert, Mem. ASME, Professor

J. Tribol. July 2004, 126(3): 430–435. doi: https://doi.org/10.1115/1.1739243

Abstract

View articletitled, A Two-Dimensional Thermoelastic Rough Surface Contact Model

Open the PDF for in another window

Topics: Heating , Pressure , Surface roughness , Thermoelasticity , Theorems (Mathematics) , Heat , Deformation

An Alternative Slicing Technique to Consider Pressure Concentrations in Non-Hertzian Line Contacts

Roman Teutsch, Research Assistant, Bernd Sauer, Professor

J. Tribol. July 2004, 126(3): 436–442. doi: https://doi.org/10.1115/1.1739244

Abstract

View articletitled, An Alternative Slicing Technique to Consider Pressure Concentrations in Non-Hertzian Line Contacts

Open the PDF for in another window

Topics: Deflection , Finite element model , Pressure , Rollers , Stress

Boundary Element Methods for Steady-State Thermal-Mechanical Problems of Counterformal Contact

Michael J. Rodgers, Shuangbiao Liu, Q. Jane Wang, Leon M. Keer

J. Tribol. July 2004, 126(3): 443–449. doi: https://doi.org/10.1115/1.1757492

Abstract

View articletitled, Boundary Element Methods for Steady-State Thermal-Mechanical Problems of Counterformal Contact

Open the PDF for in another window

Topics: Boundary element methods , Displacement , Stress , Steady state , Thermoelasticity , Temperature , Pressure

Partial Slip Rolling Wheel-Rail Contact With a Slant Rail Crack

Yung-Chuan Chen, Jao-Hwa Kuang

J. Tribol. July 2004, 126(3): 450–458. doi: https://doi.org/10.1115/1.1759339

Abstract

View articletitled, Partial Slip Rolling Wheel-Rail Contact With a Slant Rail Crack

Open the PDF for in another window

Topics: Fracture (Materials) , Pressure , Rails , Shear stress , Stress , Wheels

Thermoelastic Problems for the Anisotropic Elastic Half-Plane

Yuan Lin, Graduate Research Assistant, Timothy C. Ovaert, Mem. ASME, Professor

J. Tribol. July 2004, 126(3): 459–465. doi: https://doi.org/10.1115/1.1760553

Abstract

View articletitled, Thermoelastic Problems for the Anisotropic Elastic Half-Plane

Open the PDF for in another window

Topics: Anisotropy , Boundary-value problems , Stress , Temperature , Temperature distribution , Thermoelasticity , Traction , Heat flux

Influence of a Surface Bump or Groove on the Lubricating Performance and Dimple Phenomena in Simple Sliding Point EHL Contacts

Peiran Yang, Jinlei Cui, Motohiro Kaneta, Hiroshi Nishikawa

J. Tribol. July 2004, 126(3): 466–472. doi: https://doi.org/10.1115/1.1691434

Abstract

View articletitled, Influence of a Surface Bump or Groove on the Lubricating Performance and Dimple Phenomena in Simple Sliding Point EHL Contacts

Open the PDF for in another window

Topics: Disks , Film thickness , Glass , Interferometry , Pressure , Steel , Temperature , Viscosity , Shapes , Lubrication

Influence of Longitudinal Roughness on Friction in EHL Contacts

B. Jacod, C. H. Venner, P. M. Lugt

J. Tribol. July 2004, 126(3): 473–481. doi: https://doi.org/10.1115/1.1705664

Abstract

View articletitled, Influence of Longitudinal Roughness on Friction in EHL Contacts

Open the PDF for in another window

Topics: Friction , Surface roughness , Waves , Pressure , Wavelength , Lubricants

Measurement of Tangential Contact Hysteresis During Microslip

Sergio Filippi, Adnan Akay, Muzio M. Gola

J. Tribol. July 2004, 126(3): 482–489. doi: https://doi.org/10.1115/1.1692030

Abstract

View articletitled, Measurement of Tangential Contact Hysteresis During Microslip

Open the PDF for in another window

Topics: Displacement , Errors , Friction , Stiffness , Stress , Design , Rotation , Cycles , Transducers

A Theoretical Analysis Considering Cavitation Occurrence in Oil-Lubricated Spiral-Grooved Journal Bearings With Experimental Verification

Tomoko Hirayama, Takeo Sakurai, Hiroshi Yabe

J. Tribol. July 2004, 126(3): 490–498. doi: https://doi.org/10.1115/1.1691436

Abstract

View articletitled, A Theoretical Analysis Considering Cavitation Occurrence in Oil-Lubricated Spiral-Grooved Journal Bearings With Experimental Verification

Open the PDF for in another window

Topics: Bearings , Cavitation , Journal bearings , Pressure , Flow (Dynamics) , Stress , Clearances (Engineering)

Granular Flow Lubrication: Continuum Modeling of Shear Behavior

C. Fred Higgs,, III, John Tichy

J. Tribol. July 2004, 126(3): 499–510. doi: https://doi.org/10.1115/1.1691437

Abstract

View articletitled, Granular Flow Lubrication: Continuum Modeling of Shear Behavior

Open the PDF for in another window

Topics: Flow (Dynamics) , Lubrication , Shear stress , Stress , Particulate matter , Shear (Mechanics) , Modeling , Temperature

Experimental Studies on the Performance of Slipper Bearings Within Axial-Piston Pumps

Noah D. Manring, Chris L. Wray, Zhilin Dong

J. Tribol. July 2004, 126(3): 511–518. doi: https://doi.org/10.1115/1.1698936

Abstract

View articletitled, Experimental Studies on the Performance of Slipper Bearings Within Axial-Piston Pumps

Open the PDF for in another window

Topics: Bearings , Fluid films , Geometry , Load bearing capacity , Deformation , Pistons

Shape Design for Surface of a Slider by Inverse Method

Chin-Hsiang Cheng, Mei-Hsia Chang

J. Tribol. July 2004, 126(3): 519–526. doi: https://doi.org/10.1115/1.1704627

Abstract

View articletitled, Shape Design for Surface of a Slider by Inverse Method

Open the PDF for in another window

Topics: Bearings , Fluid films , Gradient methods , Optimization , Pressure , Shape design , Shapes , Stress , Design

Effect of Deterministic Asperity Geometry on Hydrodynamic Lubrication

Ravinder B. Siripuram, Research Assistant, Lyndon S. Stephens, Associate Professor (contact author)

J. Tribol. July 2004, 126(3): 527–534. doi: https://doi.org/10.1115/1.1715104

Abstract

View articletitled, Effect of Deterministic Asperity Geometry on Hydrodynamic Lubrication

Open the PDF for in another window

Topics: Film thickness , Friction , Geometry , Leakage , Lubrication , Pressure , Shapes , Surface texture , Bearings , Stress

Classical Bearing Misalignment and Edge Loading: A Numerical Study of Limiting Cases

S. Boedo, J. F. Booker

J. Tribol. July 2004, 126(3): 535–541. doi: https://doi.org/10.1115/1.1739241

Abstract

View articletitled, Classical Bearing Misalignment and Edge Loading: A Numerical Study of Limiting Cases

Open the PDF for in another window

Topics: Bearings , Pressure , Stress , Film thickness , Finite element analysis

Hydrodynamic Analysis of Compliant Foil Bearings With Compressible Air Flow

Z.-C. Peng, M. M. Khonsari

J. Tribol. July 2004, 126(3): 542–546. doi: https://doi.org/10.1115/1.1739242

Abstract

View articletitled, Hydrodynamic Analysis of Compliant Foil Bearings With Compressible Air Flow

Open the PDF for in another window

Topics: Bearings , Foil bearings , Load bearing capacity , Pressure , Film thickness

Homogenization of the Generalized Reynolds Equation for Ultra-Thin Gas Films and Its Resolution by FEM

G. C. Buscaglia, M. Jai

J. Tribol. July 2004, 126(3): 547–552. doi: https://doi.org/10.1115/1.1739410

Abstract

View articletitled, Homogenization of the Generalized Reynolds Equation for Ultra-Thin Gas Films and Its Resolution by FEM

Open the PDF for in another window

Topics: Disks , Finite element methods , Resolution (Optics) , Surface roughness , Texture (Materials) , Finite element analysis , Knudsen number , Lubrication , Shapes , Pressure

A Numerical Study of Air-Bearing Slider Form-Factors

Brian H. Thornton, David B. Bogy

J. Tribol. July 2004, 126(3): 553–558. doi: https://doi.org/10.1115/1.1691435

Abstract

View articletitled, A Numerical Study of Air-Bearing Slider Form-Factors

Open the PDF for in another window

Topics: Air bearings , Design , Disks , Wavelength , Damping

Time-Frequency Analysis of Slider Dynamics and the Effect of Lubricant

Saurabh K. Deoras, Frank E. Talke

J. Tribol. July 2004, 126(3): 559–564. doi: https://doi.org/10.1115/1.1695568

Abstract

View articletitled, Time-Frequency Analysis of Slider Dynamics and the Effect of Lubricant

Open the PDF for in another window

Topics: Damping , Disks , Dynamics (Mechanics) , Lubricants , Time-frequency analysis , Air bearings , Signals

Effect of Ultra-Thin Liquid Lubricant Films on Dynamics of Nano-Spacing Flying Head Sliders in Hard Disk Drives

Norio Tagawa, Noritaka Yoshioka, Atsunobu Mori

J. Tribol. July 2004, 126(3): 565–572. doi: https://doi.org/10.1115/1.1739409

Abstract

View articletitled, Effect of Ultra-Thin Liquid Lubricant Films on Dynamics of Nano-Spacing Flying Head Sliders in Hard Disk Drives

Open the PDF for in another window

Topics: Disks , Lubricants , Dynamics (Mechanics) , Film thickness , Signals

Nanomechanical Properties of Aluminum 390-T6 Rough Surfaces Undergoing Tribological Testing

Shaun R. Pergande, Andreas A. Polycarpou, Thomas F. Conry

J. Tribol. July 2004, 126(3): 573–582. doi: https://doi.org/10.1115/1.1698949

Abstract

View articletitled, Nanomechanical Properties of Aluminum 390-T6 Rough Surfaces Undergoing Tribological Testing

Open the PDF for in another window

Topics: Nanoindentation , Stress , Surface roughness , Testing , Tribology , Wear , Elastic moduli , Materials properties , Silicon , Aluminum

Adhesion and Friction Studies of Silicon and Hydrophobic and Low Friction Films and Investigation of Scale Effects

Bharat Bhushan, Fellow ASME, Huiwen Liu, Stephen M. Hsu

J. Tribol. July 2004, 126(3): 583–590. doi: https://doi.org/10.1115/1.1739407

Abstract

View articletitled, Adhesion and Friction Studies of Silicon and Hydrophobic and Low Friction Films and Investigation of Scale Effects

Open the PDF for in another window

Topics: Adhesion , Friction , Silicon , Adhesives

Sealability of Stationary Metal-to-Metal Seals

G. R. Murtagian, V. Fanelli, J. A. Villasante, D. H. Johnson, H. A. Ernst

J. Tribol. July 2004, 126(3): 591–596. doi: https://doi.org/10.1115/1.1715103

Abstract

View articletitled, Sealability of Stationary Metal-to-Metal Seals

Open the PDF for in another window

Topics: Finite element analysis , Leakage , Metals , Pressure , Sealants , Stress , Geometry

A Surface Wear Prediction Methodology for Parallel-Axis Gear Pairs

P. Bajpai, Research Assistant, A. Kahraman, Mem. ASME, Associate Professor,, N. E. Anderson, Fellow ASME, Staff Engineer,

J. Tribol. July 2004, 126(3): 597–605. doi: https://doi.org/10.1115/1.1691433

Abstract

View articletitled, A Surface Wear Prediction Methodology for Parallel-Axis Gear Pairs

Open the PDF for in another window

Topics: Gears , Wear , Helical gears

A Granular Dynamic Model for the Degradation of Material

N. Fillot, I. Iordanoff, Y. Berthier

J. Tribol. July 2004, 126(3): 606–614. doi: https://doi.org/10.1115/1.1705666

Abstract

View articletitled, A Granular Dynamic Model for the Degradation of Material

Open the PDF for in another window

Topics: Adhesion , Damping , Dynamic models , Flow (Dynamics) , Friction , Particulate matter , Pressure , Simulation , Materials degradation , Wear

Fractional Coverage Model for the Adsorption and Removal of Gas Species and Application to Superlow Friction Diamond-Like Carbon

P. L. Dickrell, W. G. Sawyer, A. Erdemir

J. Tribol. July 2004, 126(3): 615–619. doi: https://doi.org/10.1115/1.1739408

Abstract

View articletitled, Fractional Coverage Model for the Adsorption and Removal of Gas Species and Application to Superlow Friction Diamond-Like Carbon

Open the PDF for in another window

Topics: Carbon , Diamonds , Friction

Changes of Surface Topography During Running-In Process

Yeau-Ren Jeng, Zhi-Way Lin, Shiuh-Hwa Shyu

J. Tribol. July 2004, 126(3): 620–625. doi: https://doi.org/10.1115/1.1759344

Abstract

View articletitled, Changes of Surface Topography During Running-In Process

Open the PDF for in another window

Topics: Engines , Surface roughness , Wear , Density

Technical Notes

Static Friction Model for Rough Surfaces With Asymmetric Distribution of Asperity Heights

Ning Yu,, Shaun R. Pergande, and, Andreas A. Polycarpou

J. Tribol. July 2004, 126(3): 626–629. doi: https://doi.org/10.1115/1.1739406

Abstract

View articletitled, Static Friction Model for Rough Surfaces With Asymmetric Distribution of Asperity Heights

Open the PDF for in another window

Topics: Adhesion , Stiction , Surface roughness , Weibull distribution , Friction , Stress

Stability Margin of Hybrid Journal Bearing: Influence of Thermal and Elastic Effects

Vijay Kumar, Satish C. Sharma and, S. C. Jain

J. Tribol. July 2004, 126(3): 630–634. doi: https://doi.org/10.1115/1.1759343

Abstract

View articletitled, Stability Margin of Hybrid Journal Bearing: Influence of Thermal and Elastic Effects

Open the PDF for in another window

Topics: Bearings , Boundary-value problems , Deformation , Fluid films , Journal bearings , Lubricants , Stability , Temperature , Viscosity , Flow (Dynamics)

Technical Papers

The Effect of Dent Size on the Pressure Distribution and Failure Location in Dry Point Frictionless Rolling Contacts

A Model for Temperature Rise of Polishing Process Considering Effects of Polishing Pad and Abrasive

A Two-Dimensional Thermoelastic Rough Surface Contact Model

An Alternative Slicing Technique to Consider Pressure Concentrations in Non-Hertzian Line Contacts

Boundary Element Methods for Steady-State Thermal-Mechanical Problems of Counterformal Contact

Partial Slip Rolling Wheel-Rail Contact With a Slant Rail Crack

Thermoelastic Problems for the Anisotropic Elastic Half-Plane

Influence of a Surface Bump or Groove on the Lubricating Performance and Dimple Phenomena in Simple Sliding Point EHL Contacts

Influence of Longitudinal Roughness on Friction in EHL Contacts

Measurement of Tangential Contact Hysteresis During Microslip

A Theoretical Analysis Considering Cavitation Occurrence in Oil-Lubricated Spiral-Grooved Journal Bearings With Experimental Verification

Granular Flow Lubrication: Continuum Modeling of Shear Behavior

Experimental Studies on the Performance of Slipper Bearings Within Axial-Piston Pumps

Shape Design for Surface of a Slider by Inverse Method

Effect of Deterministic Asperity Geometry on Hydrodynamic Lubrication

Classical Bearing Misalignment and Edge Loading: A Numerical Study of Limiting Cases

Hydrodynamic Analysis of Compliant Foil Bearings With Compressible Air Flow

Homogenization of the Generalized Reynolds Equation for Ultra-Thin Gas Films and Its Resolution by FEM

A Numerical Study of Air-Bearing Slider Form-Factors

Time-Frequency Analysis of Slider Dynamics and the Effect of Lubricant

Effect of Ultra-Thin Liquid Lubricant Films on Dynamics of Nano-Spacing Flying Head Sliders in Hard Disk Drives

Nanomechanical Properties of Aluminum 390-T6 Rough Surfaces Undergoing Tribological Testing

Adhesion and Friction Studies of Silicon and Hydrophobic and Low Friction Films and Investigation of Scale Effects

Sealability of Stationary Metal-to-Metal Seals

A Surface Wear Prediction Methodology for Parallel-Axis Gear Pairs

A Granular Dynamic Model for the Degradation of Material

Fractional Coverage Model for the Adsorption and Removal of Gas Species and Application to Superlow Friction Diamond-Like Carbon

Changes of Surface Topography During Running-In Process

Technical Notes

Static Friction Model for Rough Surfaces With Asymmetric Distribution of Asperity Heights

Stability Margin of Hybrid Journal Bearing: Influence of Thermal and Elastic Effects

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Technical Notes

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only