Skip Nav Destination
Issues
January 2000
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Technical Papers
A Full Numerical Solution to the Mixed Lubrication in Point Contacts
J. Tribol. January 2000, 122(1): 1–9.
doi: https://doi.org/10.1115/1.555322
Topics:
Film thickness
,
Lubrication
,
Surface roughness
,
Pressure
,
Lubricants
Friction Reduction in the Sliding of an Elastic Half-Space Against a Rigid Surface Due to Incident Rectangular Dilatational Waves
J. Tribol. January 2000, 122(1): 10–15.
doi: https://doi.org/10.1115/1.555368
Topics:
Friction
,
Waves
,
Elastic half space
,
Sliding friction
A Hybrid Film Thickness Evaluation Scheme Based on Multi-Channel Interferometry and Contact Mechanics
J. Tribol. January 2000, 122(1): 16–22.
doi: https://doi.org/10.1115/1.555324
Topics:
Disks
,
Film thickness
,
Interferometry
,
Pressure
,
Refractive index
,
Lubricants
An Analysis of a Near-Surface Crack Branching Under a Rigid Indenter
J. Tribol. January 2000, 122(1): 23–29.
doi: https://doi.org/10.1115/1.555325
Topics:
Fracture (Materials)
A Fast and Accurate Method for Numerical Analysis of Elastic Layered Contacts
J. Tribol. January 2000, 122(1): 30–35.
doi: https://doi.org/10.1115/1.555323
Topics:
Contact mechanics
,
Errors
,
Numerical analysis
,
Pressure
,
Solids
,
Stress
,
Surface roughness
,
Fast Fourier transforms
,
Deflection
,
Coatings
Fast Methods for Solving Rough Contact Problems: A Comparative Study
J. Tribol. January 2000, 122(1): 36–41.
doi: https://doi.org/10.1115/1.555326
Topics:
Contact mechanics
,
Errors
,
Stress
,
Surface roughness
,
Algorithms
,
Computation
,
Fast Fourier transforms
,
Numerical analysis
Finite Element Analysis of Thermoelastic Instability With Intermittent Contact
J. Tribol. January 2000, 122(1): 42–46.
doi: https://doi.org/10.1115/1.555327
Topics:
Boundary-value problems
,
Brakes
,
Finite element analysis
,
Temperature
,
Thermoelasticity
,
Waves
,
Wheels
,
Wavelength
,
Finite element methods
,
Friction
A Finite Element Analysis of Surface Pocket Effects in Hertzian Line Contact
J. Tribol. January 2000, 122(1): 47–54.
doi: https://doi.org/10.1115/1.555328
Topics:
Finite element analysis
,
Lubricants
,
Pressure
,
Stress
,
Cylinders
,
Deformation
Detrimental Effects of Debris Dents on Rolling Contact Fatigue
J. Tribol. January 2000, 122(1): 55–64.
doi: https://doi.org/10.1115/1.555329
Topics:
Computer simulation
,
Deformation
,
Fatigue
,
Lubricants
,
Particulate matter
,
Pressure
,
Shear stress
,
Stress
,
Transients (Dynamics)
,
Lubrication
Lubricant Film Thickness in Rough Surface, Mixed Elastohydrodynamic Contact
J. Tribol. January 2000, 122(1): 65–76.
doi: https://doi.org/10.1115/1.555330
Topics:
Film thickness
,
Surface roughness
On the Sensitivity of the Asperity Pressures and Temperatures to the Fluid Pressure Distribution in Mixed-Film Lubrication
J. Tribol. January 2000, 122(1): 77–85.
doi: https://doi.org/10.1115/1.555331
Topics:
Fluid pressure
,
Lubrication
,
Pressure
,
Temperature
,
Surface roughness
,
Stress
,
Fluids
,
Lubricants
An Asperity Microcontact Model Incorporating the Transition From Elastic Deformation to Fully Plastic Flow
J. Tribol. January 2000, 122(1): 86–93.
doi: https://doi.org/10.1115/1.555332
Topics:
Deformation
,
Plasticity
,
Stress
,
Surface roughness
,
Pressure
,
Separation (Technology)
,
Modeling
A Mode-Based Elastohydrodynamic Lubrication Model With Elastic Journal and Sleeve
J. Tribol. January 2000, 122(1): 94–102.
doi: https://doi.org/10.1115/1.555321
Topics:
Bearings
,
Elasticity
,
Elastohydrodynamic lubrication
,
Film thickness
,
Pressure
,
Stress
,
Stiffness
,
Mode shapes
,
Eigenvalues
,
Performance evaluation
Analysis of a Hydrodynamic Herringbone Grooved Journal Bearing Considering Cavitation
J. Tribol. January 2000, 122(1): 103–109.
doi: https://doi.org/10.1115/1.555333
Topics:
Bearings
,
Cavitation
,
Journal bearings
,
Pressure
,
Stress
,
Torque
,
Disks
,
Algorithms
A Simplified Approach to Modeling Thermal Effects in Wet Clutch Engagement: Analytical and Experimental Comparison
J. Tribol. January 2000, 122(1): 110–118.
doi: https://doi.org/10.1115/1.555370
Topics:
Stress
,
Temperature
,
Temperature effects
,
Torque
,
Thermal diffusion
,
Lubricants
,
Fluids
,
Inertia (Mechanics)
,
Modeling
Optimizing the Smoothness and Temperatures of a Wet Clutch Engagement Through Control of the Normal Force and Drive Torque
J. Tribol. January 2000, 122(1): 119–123.
doi: https://doi.org/10.1115/1.555334
Topics:
Temperature
,
Torque
,
Gears
,
Friction
On the Numerical Modeling of High-Speed Hydrodynamic Gas Bearings
J. Tribol. January 2000, 122(1): 124–130.
doi: https://doi.org/10.1115/1.555335
Topics:
Bearings
,
Finite element analysis
,
Gas bearings
,
Slider bearings
,
Pressure
,
Lubrication
,
Stress
,
Stiffness
Pumping Characteristics of a Herringbone-Grooved Journal Bearing Functioning as a Viscous Vacuum Pump
J. Tribol. January 2000, 122(1): 131–136.
doi: https://doi.org/10.1115/1.555371
Topics:
Journal bearings
,
Pressure
,
Vacuum pumps
,
Engines
,
Motors
,
Bearings
,
Slip flow
Thermohydrodynamic Lubrication Analysis Incorporating Bingham Rheological Model
J. Tribol. January 2000, 122(1): 137–146.
doi: https://doi.org/10.1115/1.555336
Topics:
Lubrication
,
Pressure
,
Rheology
,
Shear (Mechanics)
,
Yield stress
,
Thermohydrodynamics
,
Journal bearings
,
Lubricants
Flow Characteristics of a Powder Lubricant Sheared Between Parallel Plates
J. Tribol. January 2000, 122(1): 147–155.
doi: https://doi.org/10.1115/1.555337
Transient Non-Newtonian Thermohydrodynamic Mixed Lubrication of Dynamically Loaded Journal Bearings
J. Tribol. January 2000, 122(1): 156–161.
doi: https://doi.org/10.1115/1.555338
Finite Element Mass-Conserving Cavitation Algorithm in Pure Squeeze Motion. Validation/Application to a Connecting- Rod Small End Bearing
J. Tribol. January 2000, 122(1): 162–169.
doi: https://doi.org/10.1115/1.555339
Topics:
Algorithms
,
Bearings
,
Cavitation
,
Finite element analysis
,
Pressure
,
Plates (structures)
Bulk-Flow Analysis of Hybrid Thrust Bearings for Process Fluid Applications
J. Tribol. January 2000, 122(1): 170–180.
doi: https://doi.org/10.1115/1.555340
Topics:
Bearings
,
Flow (Dynamics)
,
Fluids
,
Hydrostatics
,
Pressure
,
Stress
,
Thrust bearings
,
Inertia (Mechanics)
,
Fluid films
Influence of Thermal and Elastic Deformations on Connecting-Rod Big End Bearing Lubrication Under Dynamic Loading
J. Tribol. January 2000, 122(1): 181–191.
doi: https://doi.org/10.1115/1.555341
Topics:
Bearings
,
Deformation
,
Temperature
,
Film thickness
,
Dynamic testing (Materials)
,
Transients (Dynamics)
,
Lubrication
Operation of Foil Bearings Beyond the Bending Critical Mode
J. Tribol. January 2000, 122(1): 192–198.
doi: https://doi.org/10.1115/1.555342
Topics:
Bearings
,
Foil bearings
,
Rotors
,
Damping
Analysis of Gas Lubricated Foil Thrust Bearings Using Coupled Finite Element and Finite Difference Methods
J. Tribol. January 2000, 122(1): 199–204.
doi: https://doi.org/10.1115/1.555343
Topics:
Bearings
,
Finite element analysis
,
Foil bearings
,
Stiffness
,
Thrust bearings
,
Pressure
,
Finite difference methods
,
Stress
,
Flow charts
,
Springs
Analysis of Squeeze Film Dampers Operating With Bubbly Lubricants
Luoyi Tao, Research Associate, Sergio Diaz, Graduate Student, Luis San Andre´s, Associate Professor, K. R. Rajagopal, Professor
J. Tribol. January 2000, 122(1): 205–210.
doi: https://doi.org/10.1115/1.555344
Topics:
Dampers
,
Lubricants
,
Pressure
,
Fluids
,
Bearings
,
Clearances (Engineering)
,
Rotors
,
Bubbles
,
Fluid films
,
Bubbly flow
Study of a Novel Squeeze Film Damper and Vibration Generator
J. Tribol. January 2000, 122(1): 211–218.
doi: https://doi.org/10.1115/1.555345
Topics:
Damping
,
Generators
,
Vibration
,
Fluid films
,
Dampers
,
Lubricants
,
Wedges
A Transient Thermoelastohydrodynamic Study of Steadily Loaded Plain Journal Bearings Using Finite Element Method Analysis
J. Tribol. January 2000, 122(1): 219–226.
doi: https://doi.org/10.1115/1.555346
An Experimental Investigation of the Effect of Groove Location and Supply Pressure on the THD Performance of a Steadily Loaded Journal Bearing
J. Tribol. January 2000, 122(1): 227–232.
doi: https://doi.org/10.1115/1.555347
Topics:
Bearings
,
Pressure
,
Temperature
,
Stress
,
Flow (Dynamics)
,
Torque
,
Journal bearings
Analysis of Stresses Induced by Dynamic Load Head-Disk Contacts
J. Tribol. January 2000, 122(1): 233–237.
doi: https://doi.org/10.1115/1.555348
Statistical Analysis of Perfect Contact and Wear Durability Conditions of a Single-Degree-of-Freedom Contact Slider
J. Tribol. January 2000, 122(1): 238–245.
doi: https://doi.org/10.1115/1.555369
Topics:
Design
,
Disks
,
Durability
,
Resonance
,
Statistical analysis
,
Vibration
,
Wear
,
Stress
,
Stiffness
,
Damping
Static Friction and Initiation of Slip at Magnetic Head-Disk Interfaces
J. Tribol. January 2000, 122(1): 246–256.
doi: https://doi.org/10.1115/1.555349
Topics:
Disks
,
Film thickness
,
Friction
,
Lubricants
,
Stiction
,
Contact resistance
,
Surface roughness
Optimization of Proximity Recording Air Bearing Sliders in Magnetic Hard Disk Drives
Matthew A. O’Hara, Yong Hu, David B. Bogy, William S. Floyd, Jr. Distinguished Professor in Engineering, Fellow ASME
J. Tribol. January 2000, 122(1): 257–259.
doi: https://doi.org/10.1115/1.555350
Topics:
Air bearings
,
Disks
,
Optimization
,
Tribology
,
Stiffness
Flying Height Response to Mechanical Shock During Operation of a Magnetic Hard Disk Drive
J. Tribol. January 2000, 122(1): 260–263.
doi: https://doi.org/10.1115/1.555351
Topics:
Disks
,
Shock (Mechanics)
Magnetic Erasures Due to Impact Induced Interfacial Heating and Magnetostriction
J. Tribol. January 2000, 122(1): 264–268.
doi: https://doi.org/10.1115/1.555352
Topics:
Disks
,
Glass
,
Magnetostriction
,
Temperature
,
Heating
Plasticity Index for Contact Between a Head and a Disk With Crater-Shaped Laser Bumps
J. Tribol. January 2000, 122(1): 269–273.
doi: https://doi.org/10.1115/1.555353
Topics:
Cylinders
,
Deformation
,
Disks
,
Lasers
,
Plasticity
A Simplified 4-DOF Suspension Model for Dynamic Load/Unload Simulation and Its Application
J. Tribol. January 2000, 122(1): 274–279.
doi: https://doi.org/10.1115/1.555354
Topics:
Air bearings
,
Disks
,
Simulation
,
Stress
,
Inertia (Mechanics)
,
Modeling
,
Dynamics (Mechanics)
Improvement of the Static and Dynamic Characteristics of Magnetic Head Sliders by Optimum Design
J. Tribol. January 2000, 122(1): 280–287.
doi: https://doi.org/10.1115/1.555372
Topics:
Design
,
Magnetic heads
,
Disks
Wear Measurements of Diamond-Like Carbon Coated Proximity Recording Sliders Using Raman Spectroscopy
J. Tribol. January 2000, 122(1): 288–292.
doi: https://doi.org/10.1115/1.555355
Topics:
Carbon
,
Diamonds
,
Disks
,
Raman spectroscopy
,
Wear
,
Wear testing
The Spin-Off of Particles on a Magnetic Disk
J. Tribol. January 2000, 122(1): 293–299.
doi: https://doi.org/10.1115/1.555356
Topics:
Disks
,
Particulate matter
,
Rotation
,
Spin (Aerodynamics)
,
Lubricants
,
Particle size
,
Surface roughness
,
Manufacturing
Thermoelastic Asperity Contacts, Frictional Shear, and Parameter Correlations
J. Tribol. January 2000, 122(1): 300–307.
doi: https://doi.org/10.1115/1.555357
Topics:
Pressure
,
Shear (Mechanics)
,
Thermoelasticity
,
Temperature
,
Stress
,
Surface roughness
,
Heat
,
Friction
,
Stress analysis (Engineering)
A Mixed Soft Elastohydrodynamic Lubrication Model With Interasperity Cavitation and Surface Shear Deformation
J. Tribol. January 2000, 122(1): 308–316.
doi: https://doi.org/10.1115/1.555358
Topics:
Cavitation
,
Contact mechanics
,
Deformation
,
Lubrication
,
Shear deformation
,
Surface roughness
,
Pressure
,
Film thickness
,
Fluid mechanics
Dynamic Force Coefficients of a Multiple-Blade, Multiple-Pocket Gas Damper Seal: Test Results and Predictions
J. Tribol. January 2000, 122(1): 317–322.
doi: https://doi.org/10.1115/1.555360
Wear Testing of UHMWPE Tibial Components: Influence of Oxidation
J. Tribol. January 2000, 122(1): 323–331.
doi: https://doi.org/10.1115/1.555362
Topics:
Cycles
,
Oxidation
,
Wear
,
Wear testing
,
Cracking (Materials)
,
Fracture (Process)
,
Knee
Contact Fatigue Failure of Ultra-High Molecular Weight Polyethylene Bearing Components of Knee Prostheses
F. E. Kennedy, J. H. Currier, S. Plumet, J. L. Duda, D. P. Gestwick, J. P. Collier, B. H. Currier, M-C. Dubourg
J. Tribol. January 2000, 122(1): 332–339.
doi: https://doi.org/10.1115/1.555364
Topics:
Bearings
,
Knee
,
Oxidation
,
Stress
,
Knee joint prostheses
,
Fatigue failure
,
Damage
,
Delamination
,
Fracture (Materials)
Predictive Models for Flank Wear on Coated Inserts
J. Tribol. January 2000, 122(1): 340–347.
doi: https://doi.org/10.1115/1.555365
Performance Improvement Under Boundary Lubrication Conditions Using Slider Bearings With Silicon Nitride/Steel in High Torque Hydraulic Motors
J. Tribol. January 2000, 122(1): 348–353.
doi: https://doi.org/10.1115/1.555366
Topics:
Boundary lubrication
,
Friction
,
Lubrication
,
Silicon nitride ceramics
,
Steel
,
Stiction
,
Torque
,
Hydraulic motors
,
Surface roughness
,
Iron
Effect of Surface Finish on Gear Tooth Friction
J. Tribol. January 2000, 122(1): 354–360.
doi: https://doi.org/10.1115/1.555367
Topics:
Friction
,
Gear teeth
,
Gears
,
Stress
,
Temperature
,
Torque
,
Finishes
Critical Structures of Metal Destruction Under the Process of Wear
J. Tribol. January 2000, 122(1): 361–366.
doi: https://doi.org/10.1115/1.555359
Topics:
Copper
,
Friction
,
Metals
,
Steel
,
Wear
,
Deformation
,
Aluminum
,
Wear testing
,
Carbon
New UHMWPE/Rubber Bearing Alloy
J. Tribol. January 2000, 122(1): 367–373.
doi: https://doi.org/10.1115/1.555361
Measurements and Correlations of Slider Vibrations and Wear
J. Tribol. January 2000, 122(1): 374–380.
doi: https://doi.org/10.1115/1.555363
Topics:
Vibration
,
Wear
,
Kinetic energy
Email alerts
RSS Feeds
Static Characteristics of Hybrid Water-Lubricated Herringbone Groove Journal Bearing
J. Tribol (April 2025)