Skip Nav Destination
Issues
October 1995
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Research Papers
Friction Characteristics and Adhesion Force Under Low Normal Load
J. Tribol. October 1995, 117(4): 569–574.
doi: https://doi.org/10.1115/1.2831515
Numerical Simulations of Slider Interaction With Multiple Asperity Using Hertzian Contact Model
J. Tribol. October 1995, 117(4): 575–579.
doi: https://doi.org/10.1115/1.2831518
Topics:
Computer simulation
,
Disks
,
Surface roughness
,
Dynamics (Mechanics)
,
Friction
,
Impulse (Physics)
,
Momentum
,
Simulation results
Pole Tip Recession: Investigation of Factors Affecting Its Measurement and Its Variation With Contact Start-Stop and Constant Speed Drag Testing
J. Tribol. October 1995, 117(4): 580–587.
doi: https://doi.org/10.1115/1.2831519
Topics:
Drag (Fluid dynamics)
,
Poles (Building)
,
Testing
,
Atomic force microscopy
,
Interferometry
,
Air bearings
,
Cycles
,
Magnification
Design Optimization of the Taper-Flat Slider Positioned by a Rotary Actuator
J. Tribol. October 1995, 117(4): 588–593.
doi: https://doi.org/10.1115/1.2831520
Topics:
Actuators
,
Design
,
Optimization
,
Air bearings
,
Magnetic recording
,
Rails
Nanoscale Indentation Hardness and Wear Characterization of Hydrogenated Carbon Thin Films
J. Tribol. October 1995, 117(4): 594–601.
doi: https://doi.org/10.1115/1.2831521
Topics:
Carbon
,
Nanoscale phenomena
,
Thin films
,
Wear
,
Stress
,
Film thickness
,
Carbon films
,
Deformation
,
Nanoindentation
,
Atomic force microscopy
Numerical Simulation of Head-Disk Impacts During Dynamic Loading Processes
J. Tribol. October 1995, 117(4): 602–606.
doi: https://doi.org/10.1115/1.2831522
Accurate Real Area of Contact Measurements on Polyurethane
J. Tribol. October 1995, 117(4): 607–611.
doi: https://doi.org/10.1115/1.2831523
Topics:
Urethane elastomers
,
Stress
,
Surface roughness
,
Glass
,
Reliability
Wear Resistance of N+-Implanted Silicon Investigated by Scanning Probe Microscopy
J. Tribol. October 1995, 117(4): 612–616.
doi: https://doi.org/10.1115/1.2831524
A Correlation Between Low Cycle Fatigue Properties and Scuffing Properties of 4340 Steel
J. Tribol. October 1995, 117(4): 617–621.
doi: https://doi.org/10.1115/1.2831525
Topics:
Low cycle fatigue
,
Steel
,
Lubricants
,
Mineral oil
,
Tensile strength
Effect of Thermal Distortion on Wear of Composites
J. Tribol. October 1995, 117(4): 622–628.
doi: https://doi.org/10.1115/1.2831526
Topics:
Composite materials
,
Wear
,
Deformation
,
Friction
,
Heating
,
Metals
,
Numerical analysis
,
Oxide ceramics
,
Pressure
,
Traction
Tribological Behavior of Cubic Boron Nitride Film Sliding Against Diamond
J. Tribol. October 1995, 117(4): 629–633.
doi: https://doi.org/10.1115/1.2831527
Topics:
Boron
,
Diamonds
,
Tribology
,
Stress
,
Friction
,
Plasmas (Ionized gases)
,
Wear
,
Magnetic fields
,
Plating
,
Silicon
Dust Generation From Rolling-Sliding Elements of Combined Stainless Steel and Silicon Nitride
J. Tribol. October 1995, 117(4): 634–638.
doi: https://doi.org/10.1115/1.2831528
Topics:
Dust
,
Silicon nitride ceramics
,
Stainless steel
,
Wear
,
Friction
,
Lubricants
,
Lubrication
,
Testing
,
Tribology
Rating Thread Compounds for Galling Resistance
J. Tribol. October 1995, 117(4): 639–645.
doi: https://doi.org/10.1115/1.2831529
Topics:
Galling
,
Thread
,
Tubing
,
Failure
,
Lithium
,
Stress
,
American Petroleum Institute
,
Engineering standards
,
Friction
,
Oil fields
Thermal Non-Newtonian EHL Analysis of Rib-Roller End Contact in Tapered Roller Bearings
J. Tribol. October 1995, 117(4): 646–654.
doi: https://doi.org/10.1115/1.2831530
Topics:
Rollers
,
Tapered roller bearings
,
Lubricants
,
Temperature
,
Film thickness
,
Friction
,
Kinematics
,
Stress
,
Temperature effects
,
Torque
Influence of Indent Geometry on Repeated Two-Dimensional Rolling Contact
J. Tribol. October 1995, 117(4): 655–659.
doi: https://doi.org/10.1115/1.2831531
Topics:
Geometry
,
Rolling contact
,
Pressure
,
Coatings
,
Design
,
Finite element analysis
,
Finite element model
,
Stress
,
Surface properties
Contribution of Surface Irregularities to Rolling Contact Plasticity in Bearing Steels
J. Tribol. October 1995, 117(4): 660–666.
doi: https://doi.org/10.1115/1.2831532
Topics:
Bearings
,
Plasticity
,
Rolling contact
,
Steel
,
Deformation
,
Constitutive equations
,
Pressure
,
Finite element model
,
Hardening
,
Kinematics
Model-Based Investigation of Friction During Start-Up of Hydrodynamic Journal Bearings
J. Tribol. October 1995, 117(4): 667–673.
doi: https://doi.org/10.1115/1.2831533
Topics:
Friction
,
Journal bearings
,
Bearings
,
Design
,
Displacement
,
Dynamic systems
,
Lubrication
,
Rotors
,
Sliding friction
,
Stick-slip
A Method of Friction Torque Measurement for a Hydrodynamic Thrust Bearing
J. Tribol. October 1995, 117(4): 674–678.
doi: https://doi.org/10.1115/1.2831534
Topics:
Friction
,
Thrust bearings
,
Torque measurement
,
Design
,
Stress
,
Torque
,
Torquemeters
,
Bearings
,
Calibration
,
Drag (Fluid dynamics)
The Importance of Traction in Web Handling
J. Tribol. October 1995, 117(4): 679–684.
doi: https://doi.org/10.1115/1.2831535
Topics:
Traction
,
Friction
,
Rollers
,
Surface roughness
Inertia Effects on Film Rupture in Hydrodynamic Lubrication
J. Tribol. October 1995, 117(4): 685–690.
doi: https://doi.org/10.1115/1.2831536
Topics:
Inertia (Mechanics)
,
Lubrication
,
Rupture
,
Bearings
,
Boundary-value problems
,
Bubbles
,
Cylinders
,
Lubricants
,
Waves
Stability of Rough Journal Bearings Using Nonlinear Transient Method
J. Tribol. October 1995, 117(4): 691–695.
doi: https://doi.org/10.1115/1.2831538
Topics:
Journal bearings
,
Stability
,
Surface roughness
,
Transients (Dynamics)
,
Composite materials
,
Rotors
,
Shear flow
Measurement of Oil Film Journal Bearing Damping Coefficients—An Extension of the Selected Orbit Technique
J. Tribol. October 1995, 117(4): 696–701.
doi: https://doi.org/10.1115/1.2831539
Topics:
Damping
,
Journal bearings
,
Uncertainty
,
Uncertainty analysis
A High Performance Journal Bearing With Controlled Elastic Deflection
J. Tribol. October 1995, 117(4): 702–708.
doi: https://doi.org/10.1115/1.2831540
Topics:
Deflection
,
Journal bearings
,
Bearings
,
Elasticity
,
Friction
,
Load bearing capacity
,
Pressure
,
Temperature
,
Temperature effects
,
Viscosity
Journal Orbits and Their Stability for Rigid Unbalanced Rotors
J. Tribol. October 1995, 117(4): 709–716.
doi: https://doi.org/10.1115/1.2831541
Topics:
Rotors
,
Stability
,
Bearings
,
Equations of motion
,
Journal bearings
,
Symmetry (Physics)
Misalignment Effect on the Static and Dynamic Characteristics of Hydrodynamic Journal Bearings
J. Tribol. October 1995, 117(4): 717–723.
doi: https://doi.org/10.1115/1.2831542
Topics:
Bearings
,
Finite difference methods
,
Flow (Dynamics)
,
Friction
,
Journal bearings
,
Rotors
,
Stability
,
Stress
Magnetohydrodynamic Braking
J. Tribol. October 1995, 117(4): 724–728.
doi: https://doi.org/10.1115/1.2831543
Topics:
Braking
,
Magnetohydrodynamics
,
Magnetic fields
,
Plates (structures)
,
Fluids
Finite Element Analysis of Rolling Contact for Nonlinear Kinematic Hardening Bearing Steel
J. Tribol. October 1995, 117(4): 729–736.
doi: https://doi.org/10.1115/1.2831544
Topics:
Bearing steel
,
Finite element analysis
,
Hardening
,
Kinematics
,
Rolling contact
,
Deformation
,
Etching
,
Finite element model
,
Fracture (Materials)
,
Pressure
Effect of Humidity on the Friction and Wear Properties of Sn
J. Tribol. October 1995, 117(4): 737–741.
doi: https://doi.org/10.1115/1.2831545
Errata
Erratum: “Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part II—Friction Transients” [1995, ASME Journal of Tribology, 117(2), pp. 261–266]
J. Tribol. October 1995, 117(4): 574.
doi: https://doi.org/10.1115/1.2831517
Topics:
Friction
,
Stress
,
Transients (Dynamics)
,
Tribology
Technical Briefs
Design Procedure for Evaluating Stability of Turbomachinery Supported on Squeeze Film Dampers
J. Tribol. October 1995, 117(4): 742–744.
doi: https://doi.org/10.1115/1.2831546
Topics:
Dampers
,
Design
,
Stability
,
Turbomachinery
On the Modeling of a Thermomechanical Seizure
J. Tribol. October 1995, 117(4): 744–747.
doi: https://doi.org/10.1115/1.2831547
Topics:
Modeling
,
Thermomechanics
Discussions
Discussion: “Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part II—Friction Transients” (Polycarpou, A. A., and Soom, A. A., 1995, ASME J. Tribol., 117, pp. 261–266)
J. Tribol. October 1995, 117(4): 748.
doi: https://doi.org/10.1115/1.2831548
Topics:
Friction
,
Stress
,
Transients (Dynamics)
Email alerts
RSS Feeds
Elastohydrodynamic Lubrication Traction Coefficient is Not a Property of the Liquid Alone
J. Tribol (April 2025)