Abstract

More than 300,000 total hip replacement surgeries are performed in the United States each year to treat degenerative joint diseases that cause pain and disability. The statistical survivorship of these implants declines significantly after 15–25 years of use because wear debris causes inflammation, osteolysis, and mechanical instability of the implant. This limited longevity has unacceptable consequences, such as revision surgery to replace a worn implant, or surgery postponement, which leaves the patient in pain. Innovations such as highly cross-linked polyethylene and new materials and coatings for the femoral head have reduced wear significantly, but longevity remains an imminent problem. Another method to reduce wear is to add a patterned microtexture composed of micro-sized texture features to the smooth bearing surfaces. We critically review the literature on textured orthopedic biomaterial surfaces in the context of prosthetic hip implants. We discuss the different functions of texture features by highlighting experimental and simulated results documented by research groups active in this area. We also discuss and compare different manufacturing techniques to create texture features on orthopedic biomaterial surfaces and emphasize the key difficulties that must be overcome to produce textured prosthetic hip implants.

References

References
1.
Sloan
,
M.
,
Premkumar
,
A.
, and
Sheth
,
N. P.
,
2018
, “
Projected Volume of Primary Total Joint Arthroplasty in the U.S., 2014 to 2030
,”
J. Bone Jt. Surg. – Am.
,
100
(
17
), pp.
1455
1460
. 10.2106/JBJS.17.01617
2.
Ravi
,
B.
,
Croxford
,
R.
,
Reichmann
,
W. M.
,
Losina
,
E.
,
Katz
,
J. N.
, and
Hawker
,
G. A.
,
2012
, “
The Changing Demographics of Total Joint Arthroplasty Recipients in the United States and Ontario From 2001 to 2007
,”
Best Pract. Res. Clin. Rheumatol.
,
26
(
5
), pp.
637
647
. 10.1016/j.berh.2012.07.014
3.
Borjali
,
A.
,
2018
,
A Patterned Microtexture to Reduce Polyethylene Wear in Metal-on-Polyethylene Bearings, With Application in Prosthetic Hip Implants
,
University of Utah
,
Salt Lake City, UT
.
4.
Foran
,
J. R. H.
,
2015
, “
Total Hip Replacement
,”
Am. Acad. Orthop. Surg.
, https://orthoinfo.aaos.org/en/treatment/total-hip-replacement, Accessed 21 May 2019.
5.
Epinette
,
J.-A.
, and
Manley
,
M. T.
,
2014
, “
No Differences Found in Bearing Related Hip Survivorship at 10–12 Years Follow-up Between Patients With Ceramic on Highly Cross-Linked Polyethylene Bearings Compared to Patients With Ceramic on Ceramic Bearings
,”
J. Arthroplasty
,
29
(
7
), pp.
1369
1372
. 10.1016/j.arth.2014.02.025
6.
Rieker
,
C.
,
Konrad
,
R.
, and
Schoun
,
R.
,
2001
, “
In Vitro Comparison of the Two Hard-Hard Articulations for Total Hip Replacements
,”
Proc. Inst. Mech. Eng. Part H- J. Eng. Med.
,
215
(
2
), pp.
153
160
. 10.1243/0954411011533715
7.
Bosker
,
B. H.
,
Ettema
,
H. B.
,
Boomsma
,
M. F.
,
Kollen
,
B. J.
,
Maas
,
M.
, and
Verheyen
,
C. C. P. M.
,
2012
, “
High Incidence of Pseudotumour Formation After Large-Diameter Metal-on-Metal Total Hip Replacement
,”
J. Bone Joint Surg. Br.
,
94-B
(
6
), pp.
755
761
. 10.1302/0301-620X.94B6.28373
8.
Milošev
,
I.
,
Kovač
,
S.
,
Trebše
,
R.
,
Levašič
,
V.
, and
Pišot
,
V.
,
2012
, “
Comparison of Ten-Year Survivorship of Hip Prostheses With Use of Conventional Polyethylene, Metal-on-Metal, or Ceramic-on-Ceramic Bearings
,”
J. Bone Joint Surg.—Ser. A
,
94
(
19
), pp.
1756
1763
. 10.2106/JBJS.J.01858
9.
Choi
,
I. Y.
,
Kim
,
Y. S.
,
Hwang
,
K. T.
, and
Kim
,
Y. H.
,
2010
, “
Incidence and Factors Associated With Squeaking in Alumina-on-Alumina THA
,”
Clin. Orthop. Relat. Res.
,
468
(
12
), pp.
3234
3239
. 10.1007/s11999-010-1394-5
10.
Heckmann
,
N. D.
,
Sivasundaram
,
L.
,
Stefl
,
M. D.
,
Kang
,
H. P.
,
Basler
,
E. T.
, and
Lieberman
,
J. R.
,
2018
, “
Total Hip Arthroplasty Bearing Surface Trends in the United States From 2007 to 2014: The Rise of Ceramic on Polyethylene
,”
J. Arthroplasty
,
33
(
6
), pp.
1757
1763
. 10.1016/j.arth.2017.12.040
11.
Evans
,
J. T.
,
Evans
,
J. P.
,
Walker
,
R. W.
,
Blom
,
A. W.
,
Whitehouse
,
M. R.
, and
Sayers
,
A.
,
2019
, “
How Long Does a Hip Replacement Last? A Systematic Review and Meta-Analysis of Case Series and National Registry Reports With More Than 15 Years of Follow-Up
,”
Lancet
,
393
(
10172
), pp.
647
654
. 10.1016/S0140-6736(18)31665-9
12.
Rajaee
,
S. S.
,
Campbell
,
J. C.
,
Mirocha
,
J.
, and
Paiement
,
G. D.
,
2018
, “
Increasing Burden of Total Hip Arthroplasty Revisions in Patients Between 45 and 64 Years of Age
,”
J. Bone Joint Surg.
,
100
(
6
), pp.
449
458
. 10.2106/JBJS.17.00470
13.
Bozic
,
K. J.
,
Kamath
,
A. F.
,
Ong
,
K.
,
Lau
,
E.
,
Kurtz
,
S.
,
Chan
,
V.
,
Vail
,
T. P.
,
Rubash
,
H.
, and
Berry
,
D. J.
,
2015
, “
Comparative Epidemiology of Revision Arthroplasty: Failed THA Poses Greater Clinical and Economic Burdens Than Failed TKA
,”
Clin. Orthop. Relat. Res.
,
473
(
6
), pp.
2131
2138
. 10.1007/s11999-014-4078-8
14.
Liu
,
A.
,
Richards
,
L.
,
Bladen
,
C. L.
,
Ingham
,
E.
,
Fisher
,
J.
, and
Tipper
,
J. L.
,
2015
, “
The Biological Response to Nanometre-Sized Polymer Particles
,”
Acta Biomater.
,
23
, pp.
38
51
. 10.1016/j.actbio.2015.05.016
15.
Harris
,
W. H.
,
2001
, “
Wear and Periprosthetic Osteolysis: The Problem
,”
Clin. Orthop. Relat. Res.
,
393
, pp.
66
70
. 10.1097/00003086-200112000-00007
16.
Woolf
,
S. H.
, and
Schoomaker
,
H.
,
2019
, “
Life Expectancy and Mortality Rates in the United States, 1959–2017
,”
JAMA—J. Am. Med. Assoc.
,
322
(
20
), pp.
1996
2016
. 10.1001/jama.2019.16932
17.
Laurent
,
M. P.
,
Johnson
,
T. S.
,
Crowninshield
,
R. D.
,
Blanchard
,
C. R.
,
Bhambri
,
S. K.
, and
Yao
,
J. Q.
,
2008
, “
Characterization of a Highly Cross-Linked Ultrahigh Molecular-Weight Polyethylene in Clinical Use in Total Hip Arthroplasty
,”
J. Arthroplasty
,
23
(
5
), pp.
751
761
. 10.1016/j.arth.2007.06.006
18.
Kurtz
,
S. M.
,
2004
,
The UHMWPE Handbook: Ultra-High Molecular Weight Polyethylene in Total Joint Replacement
,
Academic Press
,
Amsterdam
.
19.
Lerf
,
R.
,
Zurbrügg
,
D.
, and
Delfosse
,
D.
,
2010
, “
Use of Vitamin E to Protect Cross-Linked UHMWPE From Oxidation
,”
Biomaterials
,
31
(
13
), pp.
3643
3648
. 10.1016/j.biomaterials.2010.01.076
20.
Haider
,
H.
,
Weisenburger
,
J. N.
,
Kurtz
,
S. M.
,
Rimnac
,
C. M.
,
Freedman
,
J.
,
Schroeder
,
D. W.
, and
Garvin
,
K. L.
,
2012
, “
Does Vitamin E-Stabilized Ultrahigh-Molecular-Weight Polyethylene Address Concerns of Cross-Linked Polyethylene in Total Knee Arthroplasty?
,”
J. Arthroplasty
,
27
(
3
), pp.
461
469
. 10.1016/j.arth.2011.03.024
21.
Rowell
,
S. L.
, and
Muratoglu
,
O. K.
,
2016
, “
Investigation of Surgically Retrieved, Vitamin E-Stabilized, Crosslinked UHMWPE Implants After Short-Term in Vivo Service
,”
J. Biomed. Mater. Res.—Part B Appl. Biomater.
,
104B
(
6
), pp.
1132
1140
. 10.1002/jbm.b.33465
22.
Brizuela
,
M.
,
Garcia-Luis
,
A.
,
Viviente
,
J. L.
,
Braceras
,
I.
, and
Oñate
,
J. I.
,
2002
, “
Tribological Study of Lubricious DLC Biocompatible Coatings
,”
J. Mater. Sci. Mater. Med.
,
13
(
12
), pp.
1129
1133
. 10.1023/A:1021129718737
23.
Balagna
,
C.
,
Faga
,
M. G.
, and
Spriano
,
S.
,
2012
, “
Tantalum-Based Multilayer Coating on Cobalt Alloys in Total Hip and Knee Replacement
,”
Mater. Sci. Eng. C
,
32
(
4
), pp.
887
895
. 10.1016/j.msec.2012.02.007
24.
Ching
,
H. A.
,
Choudhury
,
D.
,
Nine
,
M. J.
, and
Abu Osman
,
N. A.
,
2014
, “
Effects of Surface Coating on Reducing Friction and Wear of Orthopaedic Implants
,”
Sci. Technol. Adv. Mater.
,
15
(
1
), p.
014402
. 10.1088/1468-6996/15/1/014402
25.
Rahaman
,
M. N.
,
Yao
,
A.
,
Bal
,
B. S.
,
Garino
,
J. P.
, and
Ries
,
M. D.
,
2007
, “
Ceramics for Prosthetic Hip and Knee Joint Replacement
,”
J. Am. Ceram. Soc.
,
90
(
7
), pp.
1965
1988
. 10.1111/j.1551-2916.2007.01725.x
26.
Ibatan
,
T.
,
Uddin
,
M. S.
, and
Chowdhury
,
M. A. K.
,
2015
, “
Recent Development on Surface Texturing in Enhancing Tribological Performance of Bearing Sliders
,”
Surf. Coatings Technol.
,
272
, pp.
102
120
. 10.1016/j.surfcoat.2015.04.017
27.
Gropper
,
D.
,
Wang
,
L.
, and
Harvey
,
T. J.
,
2016
, “
Hydrodynamic Lubrication of Textured Surfaces: A Review of Modeling Techniques and Key Findings
,”
Tribol. Int.
,
94
, pp.
509
529
. 10.1016/j.triboint.2015.10.009
28.
Zhang
,
H.
,
Hua
,
M.
,
Dong
,
G. N.
,
Zhang
,
D. Y.
, and
Chin
,
K. S.
,
2016
, “
A Mixed Lubrication Model for Studying Tribological Behaviors of Surface Texturing
,”
Tribol. Int.
,
93
(
Part B
), pp.
583
592
. 10.1016/j.triboint.2015.03.027
29.
Ryk
,
G.
,
Kligerman
,
Y.
, and
Etsion
,
I.
,
2002
, “
Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive Components
,”
Tribol. Trans.
,
45
(
4
), pp.
444
449
. 10.1080/10402000208982572
30.
Varenberg
,
M.
,
Halperin
,
G.
, and
Etsion
,
I.
,
2002
, “
Different Aspects of the Role of Wear Debris in Fretting Wear
,”
Wear
,
252
(
11–12
), pp.
902
910
. 10.1016/S0043-1648(02)00044-3
31.
Brizmer
,
V.
,
Kligerman
,
Y.
, and
Etsion
,
I.
,
2003
, “
A Laser Surface Textured Parallel Thrust Bearing
,”
Tribol. Trans.
,
46
(
3
), pp.
397
403
. 10.1080/10402000308982643
32.
Dobrica
,
M. B.
,
Fillon
,
M.
,
Pascovici
,
M. D.
, and
Cicone
,
T.
,
2010
, “
Optimizing Surface Texture for Hydrodynamic Lubricated Contacts Using a Mass-Conserving Numerical Approach
,”
Proc. Inst. Mech. Eng. Part J-J. Eng. Tribol.
,
224
(
8
), pp.
737
750
. 10.1243/13506501JET673
33.
Noutary
,
M.-P.
,
Biboulet
,
N.
, and
Lubrecht
,
A. A.
,
2020
, “
Dimple Influence on Load Carrying Capacity of Parallel Surfaces
,”
Tribol. Int.
,
149
p.
105452
.
34.
Lu
,
A.
,
Gao
,
Y.
,
Jin
,
T.
,
Luo
,
X.
,
Zeng
,
Q.
, and
Shang
,
Z.
,
2020
, “
Effects of Surface Roughness and Texture on the Bacterial Adhesion on the Bearing Surface of Bio-Ceramic Joint Implants: An in Vitro Study
,”
Ceram. Int.
,
46
(
5
), pp.
6550
6559
. 10.1016/j.ceramint.2019.11.139
35.
Qin
,
L.
,
Zeng
,
Q.
,
Wang
,
W.
,
Zhang
,
Y.
, and
Dong
,
G.
,
2014
, “
Response of MC3T3-E1 Osteoblast Cells to the Microenvironment Produced on Co-Cr-Mo Alloy Using Laser Surface Texturing
,”
J. Mater. Sci.
,
49
(
6
), pp.
2662
2671
. 10.1007/s10853-013-7972-7
36.
Myant
,
C.
,
Underwood
,
R.
,
Fan
,
J.
, and
Cann
,
P. M.
,
2012
, “
Lubrication of Metal-on-Metal Hip Joints: The Effect of Protein Content and Load on Film Formation and Wear
,”
J. Mech. Behav. Biomed. Mater.
,
6
, pp.
30
40
. 10.1016/j.jmbbm.2011.09.008
37.
Etsion
,
I.
,
2013
, “
Modeling of Surface Texturing in Hydrodynamic Lubrication
,”
Friction
,
1
(
3
), pp.
195
209
. 10.1007/s40544-013-0018-y
38.
Ito
,
H.
,
Kaneda
,
K.
,
Yuhta
,
T.
,
Nishimura
,
I.
,
Yasuda
,
K.
, and
Matsuno
,
T.
,
2000
, “
Reduction of Polyethylene Wear by Concave Dimples on the Frictional Surface in Artificial Hip Joints
,”
J. Arthroplasty
,
15
(
3
), pp.
332
338
. 10.1016/S0883-5403(00)90670-3
39.
Sagbas
,
B.
, and
Durakbasa
,
M. N.
,
2013
, “
Effect of Surface Patterning on Frictional Heating of Vitamin E Blended UHMWPE
,”
Wear
,
303
(
1–2
), pp.
313
320
. 10.1016/j.wear.2013.03.023
40.
Tarabolsi
,
M.
,
Klassen
,
T.
,
Mantwill
,
F.
,
Gärtner
,
F.
,
Siegel
,
F.
, and
Schulz
,
A.-P.
,
2013
, “
Patterned CoCrMo and Al2O3 Surfaces for Reduced Free Wear Debris in Artificial Joint Arthroplasty
,”
J. Biomed. Mater. Res.—Part A
,
101A
(
12
), pp.
3447
3456
. 10.1002/jbm.a.34644
41.
Nečas
,
D.
,
Usami
,
H.
,
Niimi
,
T.
,
Sawae
,
Y.
,
Křupka
,
I.
, and
Hartl
,
M.
,
2020
, “
Running-in Friction of Hip Joint Replacements Can Be Significantly Reduced: The Effect of Surface-Textured Acetabular Cup
,”
Friction
,
8
(
6
), pp.
1137
1152
.
42.
Choudhury
,
D.
,
Ay Ching
,
H.
,
Mamat
,
A. B.
,
Cizek
,
J.
,
Abu Osman
,
N. A.
,
Vrbka
,
M.
,
Hartl
,
M.
, and
Krupka
,
I.
,
2015
, “
Fabrication and Characterization of DLC Coated Microdimples on Hip Prosthesis Heads
,”
J. Biomed. Mater. Res.—Part B Appl. Biomater.
,
103
(
5
), pp.
1002
1012
. 10.1002/jbm.b.33274
43.
Choudhury
,
D.
,
Urban
,
F.
,
Vrbka
,
M.
,
Hartl
,
M.
, and
Krupka
,
I.
,
2015
, “
A Novel Tribological Study on DLC-Coated Micro-Dimpled Orthopedics Implant Interface
,”
J. Mech. Behav. Biomed. Mater.
,
45
, pp.
121
131
. 10.1016/j.jmbbm.2014.11.028
44.
Nishimura
,
I.
,
Yuhta
,
T.
,
Ikubo
,
K.
,
Shimooka
,
T.
,
Murabayashi
,
S.
, and
Mitamura
,
Y.
,
1993
, “
Modification of the Frictional Surfaces of Artificial Joints
,”
ASAIO J.
,
39
(
3
), pp.
M762
M766
.
45.
Young
,
S. K.
,
Lotito
,
M. A.
, and
Keller
,
T. S.
,
1998
, “
Friction Reduction in Total Joint Arthroplasty
,”
Wear
,
222
(
1
), pp.
29
37
. 10.1016/S0043-1648(98)00275-0
46.
Sagbas
,
B.
, and
Durakbasa
,
M. N.
,
2014
, “
Surface Texturing of Vitamin E Blended UHMWPE for Reduction of Wear
,”
Acta Phys. Pol. A
,
125
(
2
), pp.
481
483
. 10.12693/APhysPolA.125.481
47.
Sawano
,
H.
,
Warisawa
,
S.
, and
Ishihara
,
S.
,
2009
, “
Study on Long Life of Artificial Joints by Investigating Optimal Sliding Surface Geometry for Improvement in Wear Resistance
,”
Precis. Eng.
,
33
(
4
), pp.
492
498
. 10.1016/j.precisioneng.2009.01.005
48.
Guo
,
J.
,
Mei
,
T.
,
Li
,
Y.
,
Ren
,
S.
,
Hafezi
,
M.
,
Lu
,
H.
, and
Dong
,
G.
,
2018
, “
Sustained-Release Application of PCEC Hydrogel on Laser-Textured Surface Lubrication
,”
Mater. Res. Express
,
5
(
6
), p.
065315
. 10.1088/2053-1591/aacac7
49.
Pratap
,
T.
, and
Patra
,
K.
,
2020
, “
Tribological Performances of Symmetrically Micro-Textured Ti-6Al-4V Alloy for Hip Joint
,”
Int. J. Mech. Sci.
,
182
, p.
105736
. 10.1016/j.ijmecsci.2020.105736
50.
Lee
,
H.
,
Lee
,
S.
,
Park
,
J.-K.
, and
Yang
,
M.
,
2018
, “
Friction and Wear Characteristics of Surface-Modified Titanium Alloy for Metal-on-Metal Hip Joint Bearing
,”
Int. J. Precis. Eng. Manuf.
,
19
(
6
), pp.
917
924
. 10.1007/s12541-018-0108-x
51.
López-Cervantes
,
A.
,
Domínguez-López
,
I.
,
Barceinas-Sánchez
,
J. D. O.
, and
García-García
,
A. L.
,
2013
, “
Effects of Surface Texturing on the Performance of Biocompatible UHMWPE as a Bearing Material During in Vitro Lubricated Sliding/Rolling Motion
,”
J. Mech. Behav. Biomed. Mater.
,
20
, pp.
45
53
. 10.1016/j.jmbbm.2012.12.010
52.
Sufyan
,
M.
,
Hussain
,
M.
,
Ahmad
,
H.
,
Abbas
,
N.
,
Ashraf
,
J.
, and
Zahra
,
N.
,
2019
, “
Bulge Micro-Textures Influence on Tribological Performance of Ultra-High-Molecular-Weight-Polyethylene (UHMWPE) Under Phosphatidylcholine (Lipid) and Bovine Serum Albumin (BSA) Solutions
,”
Biomed. Phys. Eng. Express
,
5
(
3
), p.
035021
. 10.1088/2057-1976/ab0e94
53.
Zhang
,
B.
,
Huang
,
W.
, and
Wang
,
X.
,
2012
, “
Biomimetic Surface Design for Ultrahigh Molecular Weight Polyethylene to Improve the Tribological Properties
,”
Proc. Inst. Mech. Eng. Part J J. Eng. Tribol.
,
226
(
8
), pp.
705
713
. 10.1177/1350650112437829
54.
Zhang
,
B.
,
Huang
,
W.
,
Wang
,
J.
, and
Wang
,
X.
,
2013
, “
Comparison of the Effects of Surface Texture on the Surfaces of Steel and UHMWPE
,”
Tribol. Int.
,
65
, pp.
138
145
. 10.1016/j.triboint.2013.01.004
55.
Wang
,
M.
,
Zhang
,
C.
, and
Wang
,
X.
,
2017
, “
The Wear Behavior of Textured Steel Sliding Against Polymers
,”
Materials (Basel)
,
10
(
4
), p.
330
. 10.3390/ma10040330
56.
Zhang
,
H.
,
Qin
,
L.
,
Hua
,
M.
,
Dong
,
G.
, and
Chin
,
K.
,
2015
, “
A Tribological Study of the Petaloid Surface Texturing for Co–Cr–Mo Alloy Artificial Joints
,”
Appl. Surf. Sci.
,
332
, pp.
557
564
. 10.1016/j.apsusc.2015.01.215
57.
Sahlin
,
F.
,
Glavatskih
,
S. B.
,
Almqvist
,
T.
, and
Larsson
,
R.
,
2005
, “
Two-Dimensional CFD-Analysis of Micro-Patterned Surfaces in Hydrodynamic Lubrication
,”
ASME J. Tribol.
,
127
(
1
), pp.
96
102
. 10.1115/1.1828067
58.
Dong
,
Y.
,
Svoboda
,
P.
,
Vrbka
,
M.
,
Kostal
,
D.
,
Urban
,
F.
,
Cizek
,
J.
,
Roupcova
,
P.
,
Dong
,
H.
,
Krupka
,
I.
, and
Hartl
,
M.
,
2016
, “
Towards Near-Permanent CoCrMo Prosthesis Surface by Combining Micro-Texturing and Low Temperature Plasma Carburising
,”
J. Mech. Behav. Biomed. Mater.
,
55
, pp.
215
227
. 10.1016/j.jmbbm.2015.10.023
59.
Cho
,
M.
, and
Choi
,
H.-J.
,
2014
, “
Optimization of Surface Texturing for Contact Between Steel and Ultrahigh Molecular Weight Polyethylene Under Boundary Lubrication
,”
Tribol. Lett.
,
56
(
3
), pp.
409
422
. 10.1007/s11249-014-0418-9
60.
Křupka
,
I.
, and
Hartl
,
M.
,
2007
, “
The Effect of Surface Texturing on Thin EHD Lubrication Films
,”
Tribol. Int.
,
40
(
7
), pp.
1100
1110
. 10.1016/j.triboint.2006.10.007
61.
Choudhury
,
D.
,
Rebenda
,
D.
,
Sasaki
,
S.
,
Hekrle
,
P.
,
Vrbka
,
M.
, and
Zou
,
M.
,
2018
, “
Enhanced Lubricant Film Formation Through Micro-Dimpled Hard-on-Hard Artificial Hip Joint: An in-Situ Observation of Dimple Shape Effects
,”
J. Mech. Behav. Biomed. Mater.
,
81
, pp.
120
129
. 10.1016/j.jmbbm.2018.02.014
62.
Choudhury
,
D.
,
Vrbka
,
M.
,
Mamat
,
A. B.
,
Stavness
,
I.
,
Roy
,
C. K.
,
Mootanah
,
R.
, and
Krupka
,
I.
,
2017
, “
The Impact of Surface and Geometry on Coefficient of Friction of Artificial Hip Joints
,”
J. Mech. Behav. Biomed. Mater.
,
72
, pp.
192
199
. 10.1016/j.jmbbm.2017.05.011
63.
Chyr
,
A.
,
Qiu
,
M.
,
Speltz
,
J. W.
,
Jacobsen
,
R. L.
,
Sanders
,
A. P.
, and
Raeymaekers
,
B.
,
2014
, “
A Patterned Microtexture to Reduce Friction and Increase Longevity of Prosthetic Hip Joints
,”
Wear
,
315
(
1–2
), pp.
51
57
. 10.1016/j.wear.2014.04.001
64.
Qiu
,
M.
,
Chyr
,
A.
,
Sanders
,
A. P.
, and
Raeymaekers
,
B.
,
2014
, “
Designing Prosthetic Knee Joints With Bio-Inspired Bearing Surfaces
,”
Tribol. Int.
,
77
, pp.
106
110
. 10.1016/j.triboint.2014.04.025
65.
Borjali
,
A.
,
Langhorn
,
J.
,
Monson
,
K.
, and
Raeymaekers
,
B.
,
2017
, “
Using a Patterned Microtexture to Reduce Polyethylene Wear in Metal-on-Polyethylene Prosthetic Bearing Couples
,”
Wear
,
392–393
, pp.
77
83
. 10.1016/j.wear.2017.09.014
66.
Langhorn
,
J.
,
Borjali
,
A.
,
Hippensteel
,
E.
,
Nelson
,
W.
, and
Raeymaekers
,
B.
,
2018
, “
Microtextured CoCrMo Alloy for Use in Metal-on-Polyethylene Prosthetic Joint Bearings: Multi-Directional Wear and Corrosion Measurements
,”
Tribol. Int.
,
124
, pp.
178
183
. 10.1016/j.triboint.2018.04.007
67.
Borjali
,
A.
,
Monson
,
K.
, and
Raeymaekers
,
B.
,
2018
, “
Friction Between a Polyethylene Pin and a Microtextured CoCrMo Disc, and Its Correlation to Polyethylene Wear, as a Function of Sliding Velocity and Contact Pressure, in the Context of Metal-on-Polyethylene Prosthetic Hip Implants
,”
Tribol. Int.
,
127
, pp.
568
574
. 10.1016/j.triboint.2018.07.005
68.
Dougherty
,
P. S. M.
,
Srivastava
,
G.
,
Onler
,
R.
,
Ozdoganlar
,
O. B.
, and
Higgs
,
C. F.
,
2015
, “
Lubrication Enhancement for UHMWPE Sliding Contacts Through Surface Texturing
,”
Tribol. Trans.
,
58
(
1
), pp.
79
86
. 10.1080/10402004.2014.933935
69.
Kashyap
,
V.
, and
Ramkumar
,
P.
,
2019
, “
Feasibility Study of Micro-Groove Cross Hatched Surface Texturing on Ti6Al4V for Improved Biotribological Performance in Metal-on-Polymer Hip Implant
,”
Tribol.—Mater. Surfaces Interfaces
,
13
(
3
), pp.
150
160
. 10.1080/17515831.2019.1606582
70.
Roy
,
T.
,
Choudhury
,
D.
,
Bin Mamat
,
A.
, and
Pingguan-Murphy
,
B.
,
2014
, “
Fabrication and Characterization of Micro-Dimple Array on Al2O3 Surfaces by Using a Micro-Tooling
,”
Ceram. Int.
,
40
(
1 PART B
), pp.
2381
2388
. 10.1016/j.ceramint.2013.08.009
71.
Roy
,
T.
,
Choudhury
,
D.
,
Ghosh
,
S.
,
Bin Mamat
,
A.
, and
Pingguan-Murphy
,
B.
,
2015
, “
Improved Friction and Wear Performance of Micro Dimpled Ceramic-on-Ceramic Interface for Hip Joint Arthroplasty
,”
Ceram. Int.
,
41
(
1
), pp.
681
690
. 10.1016/j.ceramint.2014.08.123
72.
Drescher
,
P.
,
Oldorf
,
P.
,
Dreier
,
T.
,
Peters
,
R.
, and
Seitz
,
H.
,
2019
, “
Modification of Joint Prosthesis Surfaces by Ultrashort Pulse Laser Treatment for Improved Joint Lubrication
,”
Curr. Dir. Biomed. Eng.
,
5
(
1
), pp.
57
60
. 10.1515/cdbme-2019-0015
73.
Drescher
,
P.
,
Oldorf
,
P.
,
Dreier
,
T.
,
Schnell
,
G.
,
Peters
,
R.
, and
Seitz
,
H.
,
2020
, “
Ring-Shaped Surface Microstructures for Improved Lubrication Performance of Joint Prostheses
,”
Lubricants
,
8
(
4
), p.
45
. 10.3390/lubricants8040045
74.
Zhou
,
X.
,
Galvin
,
A. L.
,
Jin
,
Z.
,
Yan
,
X.
, and
Fisher
,
J.
,
2012
, “
The Influence of Concave Dimples on the Metallic Counterface on the Wear of Ultra-High Molecular Weight Polyethylene
,”
Proc. Inst. Mech. Eng. Part J J. Eng. Tribol.
,
226
(
6
), pp.
455
462
. 10.1177/1350650111425439
75.
Han
,
J.
,
Fang
,
L.
,
Sun
,
J.
, and
Ge
,
S.
,
2010
, “
Hydrodynamic Lubrication of Microdimple Textured Surface Using Three-Dimensional CFD
,”
Tribol. Trans.
,
53
(
6
), pp.
860
870
. 10.1080/10402004.2010.496070
76.
Gohar
,
R.
, and
Rahnejat
,
H.
,
2008
,
Fundamentals of Tribology
,
Imperial College Press
,
Hackensack, NJ
.
77.
Qiu
,
M.
,
Bailey
,
B. N.
,
Stoll
,
R.
, and
Raeymaekers
,
B.
,
2014
, “
The Accuracy of the Compressible Reynolds Equation for Predicting the Local Pressure in Gas-Lubricated Textured Parallel Slider Bearings
,”
Tribol. Int.
,
72
, pp.
83
89
. 10.1016/j.triboint.2013.12.008
78.
Rahmani
,
R.
, and
Rahnejat
,
H.
,
2018
, “
Enhanced Performance of Optimised Partially Textured Load Bearing Surfaces
,”
Tribol. Int.
,
117
, pp.
272
282
. 10.1016/j.triboint.2017.09.011
79.
Qiu
,
M.
, and
Raeymaekers
,
B.
,
2015
, “
The Load-Carrying Capacity and Friction Coefficient of Incompressible Textured Parallel Slider Bearings With Surface Roughness Inside the Texture Features
,”
Proc. Inst. Mech. Eng. Part J J. Eng. Tribol.
,
229
(
4
), pp.
547
556
. 10.1177/1350650114545352
80.
Zhang
,
Y. L.
,
Zhang
,
X. G.
, and
Matsoukas
,
G.
,
2015
, “
Numerical Study of Surface Texturing for Improving Tribological Properties of Ultra-High Molecular Weight Polyethylene
,”
Biosurf. Biotribol.
,
1
(
4
), pp.
270
277
. 10.1016/j.bsbt.2015.11.003
81.
Shen
,
C.
, and
Khonsari
,
M. M.
,
2015
, “
Numerical Optimization of Texture Shape for Parallel Surfaces Under Unidirectional and Bidirectional Sliding
,”
Tribol. Int.
,
82
(
Part A
), pp.
1
11
. 10.1016/j.triboint.2014.09.022
82.
Su
,
B.
,
Huang
,
L.
,
Huang
,
W.
, and
Wang
,
X.
,
2017
, “
The Load Carrying Capacity of Textured Sliding Bearings With Elastic Deformation
,”
Tribol. Int.
,
109
, pp.
86
96
. 10.1016/j.triboint.2016.11.030
83.
Allen
,
Q.
, and
Raeymaekers
,
B.
,
2020
, “
Maximizing the Lubricant Film Thickness Between a Rigid Microtextured and a Smooth Deformable Surface in Relative Motion, Using a Soft Elasto-Hydrodynamic Lubrication Model
,”
ASME J. Tribol.
,
142
(
7
), p.
071802
. 10.1115/1.4046291
84.
Allen
,
Q.
, and
Raeymaekers
,
B.
,
2021
, “
The Effect of Texture Floor Profile on the Lubricant Film Thickness in a Textured Hard-on-Soft Bearing With Relevance to Prosthetic Hip Implants
,”
ASME J. Tribol.
,
143
(
2
), p.
021801
. 10.1115/1.4047753
85.
Basri
,
H.
,
Syahrom
,
A.
,
Ramadhoni
,
T. S.
,
Prakoso
,
A. T.
,
Ammarullah
,
M. I.
, and
Vincent
,
.
,
2019
, “
The Analysis of the Dimple Arrangement of the Artificial Hip Joint to the Performance of Lubrication
,”
IOP Conference Series: Materials Science and Engineering
, Vol.
620
, p.
012116
. 10.1088/1757-899X/620/1/012116
86.
Gao
,
L.
,
Yang
,
P.
,
Dymond
,
I.
,
Fisher
,
J.
, and
Jin
,
Z.
,
2010
, “
Effect of Surface Texturing on the Elastohydrodynamic Lubrication Analysis of Metal-on-Metal Hip Implants
,”
Tribol. Int.
,
43
(
10
), pp.
1851
1860
. 10.1016/j.triboint.2010.02.006
87.
Gao
,
L. M.
,
Meng
,
Q. E.
,
Liu
,
F.
,
Fisher
,
J.
, and
Jin
,
Z. M.
,
2010
, “
The Effect of Aspherical Geometry and Surface Texturing on the Elastohydrodynamic Lubrication of Metal-on-Metal Hip Prostheses Under Physiological Loading and Motions
,”
Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci.
,
224
(
12
), pp.
2627
2636
. 10.1243/09544062JMES2193
88.
Gao
,
L.
,
Hua
,
Z.
,
Hewson
,
R.
,
Andersen
,
M. S.
, and
Jin
,
Z.
,
2018
, “
Elastohydrodynamic Lubrication and Wear Modelling of the Knee Joint Replacements With Surface Topography
,”
Biosurf. Biotribol.
,
4
(
1
), pp.
18
23
. 10.1049/bsbt.2017.0003
89.
Cuervo
,
P.
,
López
,
D. A.
,
Cano
,
J. P.
,
Sánchez
,
J. C.
,
Rudas
,
S.
,
Estupiñán
,
H.
,
Toro
,
A.
, and
Abdel-Aal
,
H. A.
,
2016
, “
Development of Low Friction Snake-Inspired Deterministic Textured Surfaces
,”
Surf. Topogr. Metrol. Prop.
,
4
(
2
), p.
024013
. 10.1088/2051-672X/4/2/024013
90.
Wei
,
X.
,
Li
,
W.
,
Liang
,
B.
,
Li
,
B.
,
Zhang
,
J.
,
Zhang
,
L.
, and
Wang
,
Z.
,
2016
, “
Surface Modification of Co-Cr-Mo Implant Alloy by Laser Interference Lithography
,”
Tribol. Int.
,
97
, pp.
212
217
. 10.1016/j.triboint.2016.01.039
91.
Kustandi
,
T. S.
,
Choo
,
J. H.
,
Low
,
H. Y.
, and
Sinha
,
S. K.
,
2010
, “
Texturing of UHMWPE Surface via NIL for Low Friction and Wear Properties
,”
J. Phys. D. Appl. Phys.
,
43
(
1
), p.
015301
. 10.1088/0022-3727/43/1/015301
92.
Choudhury
,
D.
,
Roy
,
T.
,
Krupka
,
I.
,
Hartl
,
M.
, and
Mootanah
,
R.
,
2015
, “
Tribological Investigation of Ultra-High Molecular Weight Polyethylene Against Advanced Ceramic Surfaces in Total Hip Joint Replacement
,”
Proc. Inst. Mech. Eng. Part J- J. Eng. Tribol.
,
229
(
4
), pp.
410
419
. 10.1177/1350650114541106
93.
Pakhaliuk
,
V.
,
Polyakov
,
A.
,
Kalinin
,
M.
, and
Bratan
,
S.
,
2016
, “
Evaluating the Impact and Norming the Parameters of Partially Regular Texture on the Surface of the Articulating Ball Head in a Total Hip Joint Prosthesis
,”
Tribol. Online
,
11
(
4
), pp.
527
539
. 10.2474/trol.11.527
94.
Wang
,
X.
,
Wang
,
J.
,
Zhang
,
B.
, and
Huang
,
W.
,
2015
, “
Design Principles for the Area Density of Dimple Patterns
,”
Proc. Inst. Mech. Eng. Part J J. Eng. Tribol.
,
229
(
4
), pp.
538
546
. 10.1177/1350650114531939
95.
Dong
,
G.-N.
,
Hua
,
M.
,
Li
,
J.
, and
Chuah
,
K. B.
,
2007
, “
Temperature Field and Wear Prediction for UHMWPE Acetabular Cup With Assumed Rectangular Surface Texture
,”
Mater. Des.
,
28
(
9
), pp.
2402
2416
. 10.1016/j.matdes.2006.09.015
96.
Lilley
,
E.
,
1999
, “
Artificial Joint Bioprosthesis for Mitigation of Wear
,” p.
13
.
97.
Frey
,
O.
,
1977
, “
Prosthetic Acetabulum
,” p.
4
.
98.
Legrand
,
R.
,
1987
, “
Prosthesis for Replacement of the Hip’s Joint
,” p.
4
.
99.
Mathys
,
R.
,
1989
, “
Artificial Hip Joint Socket With Hydraulic Head Support
,” p.
4
.
100.
Yuhta
,
T.
,
Nishimura
,
I.
,
Kano
,
D.
,
Saitou
,
T.
,
Suzuki
,
T.
, and
Tanaka
,
M.
,
1995
, “
Wear Resisting Slide Member
,” p.
11
.
101.
Burkinshaw
,
B. D.
,
2000
, “
Implantable Prosthesis Having Textured Bearing Surfaces
,” p.
13
.
102.
Grundei
,
H.
, and
Thomas
,
W.
,
2002
, “
Sliding Partners for Artificial Joint Implants
,” p.
6
.
103.
Schmid
,
S. R.
,
2012
, “
Textured Surfaces for Orthopedic Implants
,” p.
18
.
104.
Raeymaekers
,
B.
, and
Sanders
,
A.
,
2018
, “
Prosthetic Joint
,” p.
11
.
105.
Serbousek
,
J.
, and
Bono
,
F. S.
,
1999
, “
Wear Reduced Acetabular Component
,” p.
11
.
106.
Salehi
,
A.
,
Harbaugh
,
M.
,
Sauer
,
W. L.
, and
Carson
,
C. P.
,
2003
, “
Surfaces and Processes for Wear Reducing in Orthopaedic Implants
,” p.
18
.
107.
Chan
,
F. W.
, and
Ochoa
,
J. A.
,
2003
, “
Prosthetic Joints Having Reduced Area Bearing Surfaces and Application Thereof to a Range of Sizes of Prosthetic Joints
,” p.
23
.
108.
Liao
,
Y.
,
Hoffman
,
E.
,
Wimmer
,
M.
,
Fischer
,
A.
,
Jacobs
,
J.
, and
Marks
,
L.
,
2013
, “
CoCrMo Metal-on-Metal Hip Replacements
,”
Phys. Chem. Chem. Phys.
,
15
(
3
), pp.
746
756
. 10.1039/C2CP42968C
109.
Chou
,
S. Y.
,
Krauss
,
P. R.
,
Zhang
,
W.
,
Guo
,
L.
, and
Zhuang
,
L.
,
1997
, “
Sub-10 Nm Imprint Lithography and Applications
,”
J. Vac. Sci. Technol. B Microelectron. Nanom. Struct. Process. Meas. Phenom.
,
15
(
6
), pp.
2897
2904
. 10.1116/1.589752
110.
Ippolito
,
C.
,
Yu
,
S.
,
Lai
,
Y. J.
, and
Bryant
,
T.
,
2017
, “
Process Parameter Optimization for Hot Embossing Uniformly Textured UHMWPE Surfaces for Orthopedic Bearings
,”
Procedia CIRP
,
65
, pp.
163
167
. 10.1016/j.procir.2017.04.039
111.
Geiger
,
M.
,
Roth
,
S.
, and
Becker
,
W.
,
1998
, “
Influence of Laser-Produced Microstructures on the Tribological Behaviour of Ceramics
,”
Surf. Coatings Technol.
,
100–101
, pp.
17
22
. 10.1016/S0257-8972(97)00581-1
112.
Vilhena
,
L. M.
,
Sedlaček
,
M.
,
Podgornik
,
B.
,
Vižintin
,
J.
,
Babnik
,
A.
, and
Možina
,
J.
,
2009
, “
Surface Texturing by Pulsed Nd:YAG Laser
,”
Tribol. Int.
,
42
(
10
), pp.
1496
1504
. 10.1016/j.triboint.2009.06.003
113.
Etsion
,
I.
,
2005
, “
State of the Art in Laser Surface Texturing
,”
ASME J. Tribol.
,
127
(
1
), pp.
248
253
. 10.1115/1.1828070
114.
Ezhilmaran
,
V.
,
Vasa
,
N. J.
, and
Vijayaraghavan
,
L.
,
2018
, “
Investigation on Generation of Laser Assisted Dimples on Piston Ring Surface and Influence of Dimple Parameters on Friction
,”
Surf. Coatings Technol.
,
335
, pp.
314
326
. 10.1016/j.surfcoat.2017.12.052
115.
Ancona
,
A.
,
Jauregui
,
C.
,
Döring
,
S.
,
Röser
,
F.
,
Limpert
,
J.
,
Nolte
,
S.
, and
Tünnermann
,
A.
,
2009
, “
Ultrashort Pulse Laser Drilling of Metals Using a High-Repetition Rate High Average Power Fiber CPA System
,”
Commercial and Biomedical Applications of Ultrafast Lasers IX
, Vol.
7203
, p.
720311
. 10.1117/12.813488
116.
Sedlaček
,
M.
,
Podgornik
,
B.
,
Ramalho
,
A.
, and
Česnik
,
D.
,
2017
, “
Influence of Geometry and the Sequence of Surface Texturing Process on Tribological Properties
,”
Tribol. Int.
,
115
, pp.
268
273
. 10.1016/j.triboint.2017.06.001
117.
Rajurkar
,
K. P.
,
Zhu
,
D.
,
McGeough
,
J. A.
,
Kozak
,
J.
, and
De Silva
,
A.
,
1999
, “
New Developments in Electro-Chemical Machining
,”
Ann. CIRP
,
48
(
2
), pp.
567
579
. 10.1016/S0007-8506(07)63235-1
118.
Kumar
,
S.
,
Singh
,
R.
,
Singh
,
T. P.
, and
Sethi
,
B. L.
,
2009
, “
Surface Modification by Electrical Discharge Machining: A Review
,”
J. Mater. Process. Technol.
,
209
(
8
), pp.
3675
3687
. 10.1016/j.jmatprotec.2008.09.032
119.
Melentiev
,
R.
, and
Fang
,
F.
,
2020
, “
Tailoring of Surface Topography for Tribological Purposes by Controlled Solid Particle Impacts
,”
Wear
,
444–445
, p.
203164
. 10.1016/j.wear.2019.203164
120.
Resendiz
,
J.
,
Egberts
,
P.
, and
Park
,
S. S.
,
2018
, “
Tribological Behavior of Multi-Scaled Patterned Surfaces Machined Through Inclined End Milling and Micro Shot Blasting
,”
Tribol. Lett.
,
66
(
4
), pp.
1
13
. 10.1007/s11249-018-1086-y
121.
Marcon
,
A. R.
,
Bieber
,
M.
, and
Caulfield
,
T.
,
2018
, “
Representing a ‘Revolution’: How the Popular Press Has Portrayed Personalized Medicine
,”
Genet. Med.
,
20
(
9
), pp.
950
956
. 10.1038/gim.2017.217
122.
Zheng
,
P.
,
Xu
,
P.
,
Yao
,
Q.
,
Tang
,
K.
, and
Lou
,
Y.
,
2017
, “
3D-Printed Navigation Template in Proximal Femoral Osteotomy for Older Children With Developmental Dysplasia of the Hip
,”
Sci. Rep.
,
7
(
1
), p.
44993
. 10.1038/srep44993
123.
Haynes
,
J. A.
,
Stambough
,
J. B.
,
Sassoon
,
A. A.
,
Johnson
,
S. R.
,
Clohisy
,
J. C.
, and
Nunley
,
R. M.
,
2016
, “
Contemporary Surgical Indications and Referral Trends in Revision Total Hip Arthroplasty: A 10-Year Review
,”
J. Arthroplasty
,
31
(
3
), pp.
622
625
. 10.1016/j.arth.2015.09.026
124.
2020
, “
Premarket Notification 510(K)
[Online]
, https://www.fda.gov/medical-devices/premarket-submissions/premarket-notification-510k, Accessed 22 June 2020.
125.
Gao
,
L.
,
Dowson
,
D.
, and
Hewson
,
R. W.
,
2016
, “
A Numerical Study of Non-Newtonian Transient Elastohydrodynamic Lubrication of Metal-on-Metal Hip Prostheses
,”
Tribol. Int.
,
93
(
Part B
), pp.
486
494
. 10.1016/j.triboint.2015.03.003
126.
Paul
,
J. P.
,
1966
, “
Paper 8: Forces Transmitted by the Joints in the Human Body
,”
Proceedings of the Institution of Mechanical Engineers
, pp.
8
15
.
You do not currently have access to this content.