In hard disk drives that utilize load/unload technology, the slider loads onto the disk from hundreds of microns away before the slider settles into the designed flying height. Due to the forces acting on the slider after the transition from the unloaded state to the fully loaded state, the resulting flying height of the slider may be about two orders of magnitude higher than the intended nominal flying height. Under certain circumstances, the slider may never reach the nominal flying height required for proper operation of the magnetic recording process. In this paper, the existence of multiple flying heights is demonstrated and verified both by experimentation and simulation. The effect of some of the critical parameters is also identified by both methods. We show that necessary care must be taken to avoid unwanted loading sequences where the system may be unable to store or retrieve data.
Skip Nav Destination
Article navigation
April 2004
Technical Papers
Load/Unload Systems With Multiple Flying Height States
M. Suk,
M. Suk
Storage Technology Division, International Business Machines, 5600 Cottle Road, San Jose, CA 95193
Search for other works by this author on:
O. Ruiz,
O. Ruiz
Storage Technology Division, International Business Machines, 5600 Cottle Road, San Jose, CA 95193
Search for other works by this author on:
D. Gillis
D. Gillis
Storage Technology Division, International Business Machines, 5600 Cottle Road, San Jose, CA 95193
Search for other works by this author on:
M. Suk
Storage Technology Division, International Business Machines, 5600 Cottle Road, San Jose, CA 95193
O. Ruiz
Storage Technology Division, International Business Machines, 5600 Cottle Road, San Jose, CA 95193
D. Gillis
Storage Technology Division, International Business Machines, 5600 Cottle Road, San Jose, CA 95193
Contributed by the Tribology Division for publication in the ASME JOURNAL OF TRIBOLOGY. Manuscript received by the Tribology Division March 13, 2002; revised manuscript received October 8, 2002. Associate Editor: C.-P. R. Ku.
J. Tribol. Apr 2004, 126(2): 367-371 (5 pages)
Published Online: April 19, 2004
Article history
Received:
March 13, 2002
Revised:
October 8, 2002
Online:
April 19, 2004
Citation
Suk , M., Ruiz , O., and Gillis, D. (April 19, 2004). "Load/Unload Systems With Multiple Flying Height States ." ASME. J. Tribol. April 2004; 126(2): 367–371. https://doi.org/10.1115/1.1576426
Download citation file:
Get Email Alerts
Cited By
Static Characteristics of Hybrid Water-Lubricated Herringbone Groove Journal Bearing
J. Tribol (April 2025)
Related Articles
The Effects of Slider Material on the Gasification of Carbon
J. Tribol (October,2002)
Design and Dynamics of Flying Height Control Slider With Piezoelectric Nanoactuator in Hard Disk Drives
J. Tribol (January,2007)
Effect of Intermolecular Forces on the Dynamic Response of a Slider
J. Tribol (January,2007)
Stress Induced Permanent Magnetic Signal Degradation of Perpendicular Magnetic Recording System
J. Tribol (January,2009)
Related Proceedings Papers
Related Chapters
Contact Laws
Contact in Structural Mechanics: A Weighted Residual Approach
Nonlinear Analysis of a Tapered Disk Thermal Fatigue Specimen
Thermal Fatigue of Materials and Components
Monitoring and Assessment of Campus Network Performance
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)