Theoretical analysis and optical interferometry experiments are performed to investigate the dimple phenomena in thermal elastohydrodynamic lubrication (TEHL) of elliptical contacts under pure sliding conditions. The lubricant entrainment is along the major and minor axes of the Hertzian contact ellipse or at some intermediate angle. Good agreement is achieved between theoretical and experimental results and the surface dimple phenomena occurring in glass-steel conjunctions are explained by the temperature-viscosity wedge mechanism. The influence of the angle between the minor axis and the entrainment vector on the position and shape of the dimple, the central and minimum film thickness, the temperature distribution and the frictional coefficient is discussed.
Skip Nav Destination
Article navigation
January 2003
Technical Papers
On the Surface Dimple Phenomena in Elliptical TEHL Contacts With Arbitrary Entrainment
Jing Wang,
Jing Wang
Department of Mechanical Engineering, Qingdao Institute of Architecture and Engineering, Qingdao 266033, People’s Republic of China
Search for other works by this author on:
Peiran Yang,
Peiran Yang
Department of Mechanical Engineering, Qingdao Institute of Architecture and Engineering, Qingdao 266033, People’s Republic of China
Search for other works by this author on:
Motohiro Kaneta,
Motohiro Kaneta
Department of Mechanical and Control Engineering, Kyushu Institute of Technology, Kitakyushu 804-8550, Japan
Search for other works by this author on:
Hiroshi Nishikawa
Hiroshi Nishikawa
Department of Mechanical and Control Engineering, Kyushu Institute of Technology, Kitakyushu 804-8550, Japan
Search for other works by this author on:
Jing Wang
Department of Mechanical Engineering, Qingdao Institute of Architecture and Engineering, Qingdao 266033, People’s Republic of China
Peiran Yang
Department of Mechanical Engineering, Qingdao Institute of Architecture and Engineering, Qingdao 266033, People’s Republic of China
Motohiro Kaneta
Department of Mechanical and Control Engineering, Kyushu Institute of Technology, Kitakyushu 804-8550, Japan
Hiroshi Nishikawa
Department of Mechanical and Control Engineering, Kyushu Institute of Technology, Kitakyushu 804-8550, Japan
Contributed by the Tribology Division for publication in the ASME JOURNAL OF TRIBOLOGY. Manuscript received by the Tribology Division July 19, 2001 revised manuscript received April 18, 2002. Associate Editor: A. A. Lubrecht.
J. Tribol. Jan 2003, 125(1): 102-109 (8 pages)
Published Online: December 31, 2002
Article history
Received:
July 19, 2001
Revised:
April 18, 2002
Online:
December 31, 2002
Citation
Wang , J., Yang, P., Kaneta , M., and Nishikawa, H. (December 31, 2002). "On the Surface Dimple Phenomena in Elliptical TEHL Contacts With Arbitrary Entrainment ." ASME. J. Tribol. January 2003; 125(1): 102–109. https://doi.org/10.1115/1.1494087
Download citation file:
Get Email Alerts
Related Articles
Influence of a Surface Bump or Groove on the Lubricating Performance and Dimple Phenomena in Simple Sliding Point EHL Contacts
J. Tribol (July,2004)
On the Theory of Thermal Elastohydrodynamic Lubrication at High Slide-Roll Ratios—Circular Glass-Steel Contact Solution at Opposite Sliding
J. Tribol (October,2001)
Quantitative Comparisons Between Measured and Solved EHL Dimples in Point Contacts
J. Tribol (January,2003)
Formation of Steady Dimples in Point TEHL Contacts
J. Tribol (January,2001)
Related Chapters
Development of the Cost-Efficient Steel 18MnCrMoV4-8-7 for Case-Hardening or Carbonitriding of Mid-Sized Roller Bearings
Bearing and Transmission Steels Technology
Repair Methods for Loadbearing Steel Structures Operating on the Norwegian Continental Shelf
Ageing and Life Extension of Offshore Facilities
Hydrodynamic Lubrication
Design of Mechanical Bearings in Cardiac Assist Devices