Lignocellulosic woody biomasses such as rhododendron (RD), ash tree (AT), and hybrid poplar (HP) were heated under N2 at 200 °C and 400 °C, which are regarded as outside the range of efficient torrefaction temperatures. Also, several Turkish brown coals were carbonized at 750 °C for comparison. The obtained biochars/chars were characterized by scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), and thermal analysis. Combustion reactivity of the raw samples and the chars was estimated using the burning profiles. Burning kinetics was established by the Borchardt and Daniels (B&D) kinetic analysis method that was based on the evaluation of the differential scanning calorimetry (DSC) data. Ignition index (Ci), burnout index (Cb), comprehensive combustibility index (S), and burning stability index (DW) were considered to evaluate the combustion performance. It was concluded that although treatment at 200 °C did not lead to considerable changes on the biomass structure, the combustion performance of the treated biomass became highly improved in comparison with the raw biomass. However, treatment at 400 °C led to serious variations in the biomass structure mainly due to reduction in O content and volatiles so that the fuel properties and the burning characteristics were affected, and the combustion performance was negatively influenced.
Skip Nav Destination
Article navigation
October 2019
Research-Article
Effects of Pretreatment Outside of Torrefaction Range on Combustion Characteristics of Chars From Lignocellulosic Biomass
A. Caliskan Sarikaya,
A. Caliskan Sarikaya
Chemical and Metallurgical Engineering Faculty,
Chemical Engineering Department,
34469, Maslak, Istanbul,
e-mail: caliskanays@itu.edu.tr
Chemical Engineering Department,
Istanbul Technical University
,34469, Maslak, Istanbul,
Turkey
e-mail: caliskanays@itu.edu.tr
Search for other works by this author on:
H. Haykiri-Acma,
H. Haykiri-Acma
Chemical and Metallurgical Engineering Faculty,
Chemical Engineering Department,
34469, Maslak, Istanbul,
e-mail: hanzade@itu.edu.tr
Chemical Engineering Department,
Istanbul Technical University
,34469, Maslak, Istanbul,
Turkey
e-mail: hanzade@itu.edu.tr
Search for other works by this author on:
S. Yaman
S. Yaman
1
Chemical and Metallurgical Engineering Faculty,
Chemical Engineering Department,
34469, Maslak, Istanbul,
e-mail: yamans@itu.edu.tr
Chemical Engineering Department,
Istanbul Technical University
,34469, Maslak, Istanbul,
Turkey
e-mail: yamans@itu.edu.tr
1Corresponding author.
Search for other works by this author on:
A. Caliskan Sarikaya
Chemical and Metallurgical Engineering Faculty,
Chemical Engineering Department,
34469, Maslak, Istanbul,
e-mail: caliskanays@itu.edu.tr
Chemical Engineering Department,
Istanbul Technical University
,34469, Maslak, Istanbul,
Turkey
e-mail: caliskanays@itu.edu.tr
H. Haykiri-Acma
Chemical and Metallurgical Engineering Faculty,
Chemical Engineering Department,
34469, Maslak, Istanbul,
e-mail: hanzade@itu.edu.tr
Chemical Engineering Department,
Istanbul Technical University
,34469, Maslak, Istanbul,
Turkey
e-mail: hanzade@itu.edu.tr
S. Yaman
Chemical and Metallurgical Engineering Faculty,
Chemical Engineering Department,
34469, Maslak, Istanbul,
e-mail: yamans@itu.edu.tr
Chemical Engineering Department,
Istanbul Technical University
,34469, Maslak, Istanbul,
Turkey
e-mail: yamans@itu.edu.tr
1Corresponding author.
Contributed by the Heat Transfer Division of ASME for publication in the Journal of Thermal Science and Engineering Applications. Manuscript received November 6, 2018; final manuscript received December 21, 2018; published online March 21, 2019. Assoc. Editor: Matthew Oehlschlaeger.
J. Thermal Sci. Eng. Appl. Oct 2019, 11(5): 051004 (9 pages)
Published Online: March 21, 2019
Article history
Received:
November 6, 2018
Revision Received:
December 21, 2018
Accepted:
December 21, 2018
Citation
Caliskan Sarikaya, A., Haykiri-Acma, H., and Yaman, S. (March 21, 2019). "Effects of Pretreatment Outside of Torrefaction Range on Combustion Characteristics of Chars From Lignocellulosic Biomass." ASME. J. Thermal Sci. Eng. Appl. October 2019; 11(5): 051004. https://doi.org/10.1115/1.4042589
Download citation file:
Get Email Alerts
Cited By
Performance Analysis of a Phase Changing Material Based Thermocycler for Nucleic Acid Amplification
J. Thermal Sci. Eng. Appl (May 2023)
Numerical Investigation on Heat Flux Variation in Fuel Bundle Over Fully Voided Concentric Channel of IPHWR Under Severe Accidental Scenario
J. Thermal Sci. Eng. Appl (May 2023)
A Novel Non-Intrusive Imaging Technique to Quantify Shrinkage of Elephant Foot Yam During Convective Drying
J. Thermal Sci. Eng. Appl (May 2023)
Multi-objective optimization of an inlet air-cooled combined cycle power plant
J. Thermal Sci. Eng. Appl
Related Articles
Evaluation of Synergy Between Lignite and Carbonized Biomass During Co-Combustion
J. Energy Resour. Technol (May,2022)
Synergistic Interactions During Cocombustion of Lignite, Biomass, and Their Chars
J. Energy Resour. Technol (December,2019)
Synergistic
Investigation for Co-Combustion of Biochars and Lignite—Thermogravimetric Analysis
Approach
J. Thermal Sci. Eng. Appl (February,2019)
Optimization of Co-Firing Burners
J. Thermal Sci. Eng. Appl (December,2016)
Related Chapters
Carbonaceous Material Characterization
Voltage-Enhanced Processing of Biomass and Biochar
Voltage-Enhanced Processing of Biochar
Voltage-Enhanced Processing of Biomass and Biochar
Energy Options and Terms: An Introduction
Energy Supply and Pipeline Transportation: Challenges & Opportunities