The objective of this paper is an improved understanding of the physics of the aeroelastic motion of wind turbine blades in order to improve the numerical models used for their design. Two- and three-dimensional Navier–Stokes calculations of the flow around a wind turbine airfoil using the k−ω SST and Detached Eddy Simulation (DES) turbulence models, as well as an engineering semiempirical dynamic stall model, are conducted. The computational results are compared to the experimental results that are available for both the static airfoil and the pitching airfoil. It is shown that the Navier–Stokes simulations can reproduce the main characteristic features of the flow. The DES model seems to be able to reproduce most of the details of the unsteady aerodynamics. Aerodynamic work computations indicate that a plunging motion of the airfoil can become unstable.

Keywords:
wind turbines, aerodynamics, elasticity, blades, design engineering, Navier-Stokes equations, flow simulation, turbulence, external flows, Aerodynamics, Aeroelasticity, Airfoil, Computational Fluid Dynamics, Wind Tunnel, Aerodynamic Damping, Engineering Model
Topics:
Airfoils, Computation, Flow (Dynamics)
1.
Michelsen, J. A., 1992, “Basis 3D—A Platform for Development of Multiblock PDE Solvers,” Tech. Report AFM 92-05, Technical University of Denmark, Lyngby, Denmark.
2.
Michelsen, J. A., 1994, “Block Structured Multigrid Solution of 2D and 3D Elliptic PDE’s,” Tech. Report AFM 94-06, Technical University of Denmark, Lyngby, Denmark.
3.
Sørensen, N. N., 1995, “General Purpose Flow Solver Applied to Flow Over Hills,” PhD Thesis, Tech. Report Risø-R-827(EN), Risø National Laboratory, Roskilde, Denmark.
4.
Rhie
,
C. M.
, and
Chow
,
W. L.
,
1993
, “
Numerical Study of the Turbulent Flow Past an Airfoil With Trailing Edge Separation
,”
AIAA J.
,
21
, pp.
1525
–
1532
.
5.
Issa
,
R. I.
,
1985
, “
Solution of the Implicitly Discretized Fluid Flow Equations by Operator-Splitting
,”
J. Comput. Phys.
,
62
, pp.
40
–
65
.
6.
Yeo
,
R. W.
,
Wood
,
P. E.
, and
Hrymak
,
A. N.
,
1991
, “
A Numerical Study of Laminar 90° Bend Duct Flow With Different Discretization Schemes
,”
J. Fluids Eng.
,
113
, pp.
563
–
568
.
7.
Menter, F. R., 1993, “Zonal Two-Equations k−ω Turbulence Models for Aerodynamic Flows,” AIAA Paper 93-2906, 24th Fluid Dynamics Conference, Orlando (US).
8.
Strelets, M., 2001, “Detached Eddy Simulation of Massively Separated Flows,” AIAA Paper 2001-0879, 39th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV (US).
9.
Smagorinsky
,
J.
,
1963
, “
General Circulation Experiments With the Primitive Equations. I: The Basic Experiment
,”
Mon. Weather Rev.
,
91
(
3
), pp.
99
–
165
.
10.
Bertagnolio, F., 2004, “Numerical Study of the Static and Pitching RISO̸-B1-18 Airfoil,” Tech. Report Risø-R-1448(EN), Risø National Laboratory, Roskilde, Denmark.
11.
Leishman
,
J. G.
, and
Beddoes
,
T. S.
,
1989
, “
A Semi-Empirical Model for Dynamic Stall
,”
J. Am. Helicopter Soc.
,
34
(
3
), pp.
3
–
17
.
12.
Hansen, M. H., Gaunaa, M., and Madsen, H. Aa., 2004, “A Beddoes–Leishman Type Dynamic Stall Model in State-Space and Indicial Formulations,” Tech. Report Risø-R-1354(EN), Risø National Laboratory, Roskilde, Denmark.
13.
Fuglsang, P., Antoniou, I., Sørensen, N. N., and Madsen, H. Aa., 1998, “Validation of a Wind Tunnel Testing Facility for Blade Surface Pressure Measurements,” Tech. Report Risø-R-981 (EN), Risø National Laboratory, Roskilde, Denmark.
14.
Fuglsang, P., Bak, C., Gaunaa, M., and Antoniou, I., 2003, “Wind Tunnel Tests of Risø-B1-18 and Risø-B1-24,” Tech. Report Risø-R-1375 (EN), Risø National Laboratory, Roskilde, Denmark.
15.
Johansen
,
J.
,
Sørensen
,
N. N.
,
Michelsen
,
J. A.
, and
Schreek
,
S.
,
2002
, “
Detached-Eddy Simulation of Flow Around the NREL Phase-VI Blade
,”
Wind Eng.
,
5
, pp.
185
–
197
.
16.
Johansen, J., and Sørensen, N. N., “Application of DES Turbulence Model on Airfoil Flows,” 2000, IEA Joint Action Committee on Aerodynamics Annex IV Aero Experts Meeting, Boulder, CO (US), 4–5 December.
17.
Clough, R. W., and Penzien, J., 1975, Dynamics of Structures, McGraw Hill.
18.
Petersen, J. T., Madsen, H. Aa., Bjo¨rck, A., Enevoldsen, P., O̸ye, S., Ganander, H., and Winkelaar, D., 1998, “Prediction of Dynamic Loads and Vibrations in Stall,” Tech. Report Risø-R-1045 (EN), Risø National Laboratory, Roskilde, Denmark.
Copyright © 2005
 by ASME
You do not currently have access to this content.