Skip Nav Destination
Issues
November 2008
ISSN 0094-9930
EISSN 1528-8978
Research Papers
Design and Analysis
A Novel and Simple Approach for Predicting Creep Life Based on Tertiary Creep Behavior
J. Pressure Vessel Technol. November 2008, 130(4): 041201.
doi: https://doi.org/10.1115/1.2967879
Study of Parameter Effects on Residual Stresses and Thermal Deformation of Brazed Plate-Fin Structure Using Finite Element Method
J. Pressure Vessel Technol. November 2008, 130(4): 041202.
doi: https://doi.org/10.1115/1.2967740
Topics:
Brazing
,
Filler metals
,
Thermal deformation
,
Stress
,
Residual stresses
,
Temperature
,
Vacuum
,
Finite element analysis
,
Pressure
,
Finite element methods
Finite Element Analysis of the Effect of Brazed Residual Stress on Creep for Stainless Steel Plate-Fin Structure
J. Pressure Vessel Technol. November 2008, 130(4): 041203.
doi: https://doi.org/10.1115/1.2967807
Topics:
Creep
,
Finite element analysis
,
Stainless steel
,
Stress
,
Brazing
Modeling the Effects of Initial Tube-Tubesheet Clearance, Wall Reduction and Material Strain Hardening on Rolled Joint Strength
J. Pressure Vessel Technol. November 2008, 130(4): 041204.
doi: https://doi.org/10.1115/1.2967809
Topics:
Clearances (Engineering)
,
Stress
,
Work hardening
,
Rollers
,
Pressure
,
Finite element analysis
Elastoplastic Analysis of a Miniature Circular Disk Bending Specimen
J. Pressure Vessel Technol. November 2008, 130(4): 041205.
doi: https://doi.org/10.1115/1.2967812
Topics:
Deflection
,
Disks
,
Finite element analysis
,
Stress
,
Yield stress
,
Steel
,
Ductility
An Inverse Method for the Determination of Thermal Stress-Intensity Factors Under Arbitrary Thermal-Shocks
J. Pressure Vessel Technol. November 2008, 130(4): 041206.
doi: https://doi.org/10.1115/1.2967737
Topics:
Fracture (Materials)
,
Stress
,
Temperature
,
Thermal shock
,
Temperature distribution
,
Polynomials
,
Slabs
Structural Integrity Assessment of Steam Generator Tube by the Use of Heterogeneous Finite Element Method
J. Pressure Vessel Technol. November 2008, 130(4): 041207.
doi: https://doi.org/10.1115/1.2967727
Failure Modes of Perforated Material Under Finite Deformation
J. Pressure Vessel Technol. November 2008, 130(4): 041208.
doi: https://doi.org/10.1115/1.2967881
General Variable Material Property Formulation for the Solution of Autofrettaged Thick-Walled Tubes With Constant Axial Strains
J. Pressure Vessel Technol. November 2008, 130(4): 041209.
doi: https://doi.org/10.1115/1.2973239
Topics:
Autofrettage
,
Plane strain
,
Materials properties
Study of Plastic Limit Load on Pressurized Cylinders With Lateral Nozzle
J. Pressure Vessel Technol. November 2008, 130(4): 041210.
doi: https://doi.org/10.1115/1.2967743
Topics:
Cylinders
,
Finite element analysis
,
Nozzles
,
Stress
,
Vessels
,
Computer simulation
,
Deformation
A 3-D Model for Evaluating the Residual Stress Field Due to Swage Autofrettage
J. Pressure Vessel Technol. November 2008, 130(4): 041211.
doi: https://doi.org/10.1115/1.2967741
Topics:
Autofrettage
,
Stress
,
Three-dimensional models
,
Pressure
,
Displacement
The Assessment of Residual Stress Effects on Ductile Tearing Using Continuum Damage Mechanics
J. Pressure Vessel Technol. November 2008, 130(4): 041212.
doi: https://doi.org/10.1115/1.2967876
Topics:
Ductile fracture
,
Fracture (Materials)
,
Stress
,
Calibration
,
Residual stresses
,
Fracture toughness
,
Damage mechanics
,
Plane strain
Fluid-Structure Interaction
-Resistance Properties of Narrow Gap GTAW Welds for Ferritic Primary Loop Piping
J. Pressure Vessel Technol. November 2008, 130(4): 041301.
doi: https://doi.org/10.1115/1.2967810
Topics:
Fracture toughness
,
Pipes
,
Welded joints
,
Welding
,
Fracture (Materials)
Characteristics of the Suppression of Sloshing in a Vessel by a Bulkhead
J. Pressure Vessel Technol. November 2008, 130(4): 041302.
doi: https://doi.org/10.1115/1.2967828
Topics:
Breakwaters
,
Damping
,
Flow (Dynamics)
,
Sloshing
,
Vessels
,
Vortices
,
Excitation
Harmonic Analysis of a Cylinder Cluster in Square Confinement With Position-Dependent Fluid Damping
J. Pressure Vessel Technol. November 2008, 130(4): 041303.
doi: https://doi.org/10.1115/1.2967755
Topics:
Cylinders
,
Damping
,
Fluids
,
Modal analysis
,
Vibration
,
Fuel rods
,
Finite element analysis
Materials and Fabrication
Effect of High-Pressure Hydrogen Gas on Fracture of Austenitic Steels
J. Pressure Vessel Technol. November 2008, 130(4): 041401.
doi: https://doi.org/10.1115/1.2967833
Topics:
Fracture (Materials)
,
Fracture (Process)
,
High pressure (Physics)
,
Hydrogen
,
Stainless steel
,
Ductility
,
Alloys
,
Yield strength
Determination of -Integral Using the Load-COD Record for Circumferential Through-Wall Cracked Pipes
J. Pressure Vessel Technol. November 2008, 130(4): 041402.
doi: https://doi.org/10.1115/1.2967830
Topics:
Displacement
,
Finite element analysis
,
Fracture (Materials)
,
Pipes
,
Stress
,
Tension
,
Testing
Computational and Experimental Studies of High Temperature Crack Initiation in the Presence of Residual Stress
J. Pressure Vessel Technol. November 2008, 130(4): 041403.
doi: https://doi.org/10.1115/1.2967831
Topics:
Creep
,
Stress
,
Finite element analysis
,
Damage
,
Fracture (Materials)
Seismic Engineering
Discrete Models for Seismic Analysis of Liquid Storage Tanks of Arbitrary Shape and Fill Height
J. Pressure Vessel Technol. November 2008, 130(4): 041801.
doi: https://doi.org/10.1115/1.2967834
Topics:
Finite element methods
,
Finite element model
,
Fluids
,
Pressure
,
Seismic analysis
,
Shapes
,
Sloshing
,
Storage tanks
,
Springs
,
Excitation
Email alerts
RSS Feeds
Analysis of Factors Influencing Y-Ring Sealing Under Ultra-High-Pressure, High-Temperature, and Low-Temperature Conditions
J. Pressure Vessel Technol (February 2025)