Skip Nav Destination
Issues
February 2007
ISSN 0094-9930
EISSN 1528-8978
In this Issue
Research Papers
Fluid-Structure Interaction Effects Modeling for the Modal Analysis of a Nuclear Pressure Vessel
J. Pressure Vessel Technol. February 2007, 129(1): 1–6.
doi: https://doi.org/10.1115/1.2389025
Topics:
Fluid structure interaction
,
Fluids
,
Modal analysis
,
Modeling
,
Reactor vessels
,
Stiffness
,
Nuclear reactors
,
Finite element analysis
,
Pressure
Vibration Excitation Forces Due to Two-Phase Flow in Piping Elements
J. Pressure Vessel Technol. February 2007, 129(1): 7–13.
doi: https://doi.org/10.1115/1.2388994
Topics:
Excitation
,
Flow (Dynamics)
,
Pipes
,
Two-phase flow
,
Vibration
,
Porosity
,
Momentum
,
Water
Acoustic Excitation by Flow in T-Junctions
J. Pressure Vessel Technol. February 2007, 129(1): 14–20.
doi: https://doi.org/10.1115/1.2388995
Topics:
Acoustics
,
Bubbles
,
Flow (Dynamics)
,
Junctions
,
Pipes
,
Pressure
,
Separation (Technology)
,
Resonance
,
Excitation
Vibration Excitation Force Measurements in a Rotated Triangular Tube Bundle Subjected to Two-Phase Cross Flow
J. Pressure Vessel Technol. February 2007, 129(1): 21–27.
doi: https://doi.org/10.1115/1.2388996
Effects of Simulated Seismic Loading on LBB Assessment of High Energy Piping
J. Pressure Vessel Technol. February 2007, 129(1): 28–37.
doi: https://doi.org/10.1115/1.2388998
Topics:
Cycles
,
Displacement
,
Fracture (Materials)
,
Pipes
,
Stress
Destruction of Cryogenic Pressure Vessel and Piping by Shock Wave
J. Pressure Vessel Technol. February 2007, 129(1): 38–42.
doi: https://doi.org/10.1115/1.2388999
Topics:
Flashing
,
Nitrogen
,
Pipes
,
Pressure vessels
,
Shock waves
,
Temperature
,
Thermal insulation
,
Pressure
,
Coolants
Effect of Bolt Tightness on the Behavior of Composite Joints
J. Pressure Vessel Technol. February 2007, 129(1): 43–51.
doi: https://doi.org/10.1115/1.2389000
Topics:
Composite materials
,
Stress
,
Bearings
,
Damage
,
Displacement
,
Aluminum
,
Finite element analysis
Approximate Direct and Inverse Relationships for Thermal and Stress States in Thick-Walled Vessels Under Thermal Shock
J. Pressure Vessel Technol. February 2007, 129(1): 52–57.
doi: https://doi.org/10.1115/1.2389002
Topics:
Convection
,
Cylinders
,
Finite element analysis
,
Laplace transforms
,
Stress
,
Temperature
,
Thermal shock
,
Thermoelasticity
,
Transients (Dynamics)
,
Vessels
Incorporating Neural Network Material Models Within Finite Element Analysis for Rheological Behavior Prediction
J. Pressure Vessel Technol. February 2007, 129(1): 58–65.
doi: https://doi.org/10.1115/1.2389004
Topics:
Artificial neural networks
,
Finite element analysis
,
Stress
,
Flow (Dynamics)
,
Rheology
Numerical Simulation of In-Service Welding of a Pressurized Pipeline
J. Pressure Vessel Technol. February 2007, 129(1): 66–72.
doi: https://doi.org/10.1115/1.2389005
Topics:
Computer simulation
,
Stress
,
Temperature
,
Welding
,
Pipes
,
Flow (Dynamics)
,
Heat
Strength and Buoyancy Analyses of Floating Roof With Continuous Beams and Dome Frames Under Rainwater Loading
J. Pressure Vessel Technol. February 2007, 129(1): 73–82.
doi: https://doi.org/10.1115/1.2389007
Topics:
Roofs
,
Buoyancy
,
Deflection
,
Domes (Structural elements)
Autofrettage and Reautofrettage of a Spherical Pressure Vessel
J. Pressure Vessel Technol. February 2007, 129(1): 83–88.
doi: https://doi.org/10.1115/1.2389020
Topics:
Autofrettage
,
Pressure vessels
,
Vessels
,
Stress
,
Steel
,
Stress analysis (Engineering)
,
Pressure
Optical Monitoring of Bolt Tightening Using 3D Electronic Speckle Pattern Interferometry
J. Pressure Vessel Technol. February 2007, 129(1): 89–95.
doi: https://doi.org/10.1115/1.2389024
Fatigue Crack Modeling and Simulation Based on Continuum Damage Mechanics
J. Pressure Vessel Technol. February 2007, 129(1): 96–102.
doi: https://doi.org/10.1115/1.2388993
Topics:
Damage
,
Fracture (Materials)
,
Simulation
,
Fatigue cracks
,
Crack propagation
,
Stress
,
Anisotropy
,
Low cycle fatigue
,
Damage mechanics
Thermal Opening Technique for Nondestructive Evaluation of Closed Cracks
J. Pressure Vessel Technol. February 2007, 129(1): 103–108.
doi: https://doi.org/10.1115/1.2389026
Reliability of Sampling Inspection Schemes Applied to Replacement Steam Generators
J. Pressure Vessel Technol. February 2007, 129(1): 109–117.
doi: https://doi.org/10.1115/1.2389027
Topics:
Boilers
,
Inspection
,
Probability
Post-Expansion Tube Response Under Mechanical and Hydraulic Expansion—A Comparative Study
J. Pressure Vessel Technol. February 2007, 129(1): 118–124.
doi: https://doi.org/10.1115/1.2389028
Topics:
Damping
,
Displacement
,
Equations of motion
,
Fluids
,
Pressure
,
Stress
,
Waves
,
Wave propagation
Thermal Shock Cracking: Design and Assessment Guidelines
J. Pressure Vessel Technol. February 2007, 129(1): 125–132.
doi: https://doi.org/10.1115/1.2389029
Topics:
Design
,
Fracture (Materials)
,
Fracture (Process)
,
Stress
,
Thermal shock
,
Cracking (Materials)
Metallographic Examination and Validation of Thermal Effects in Hypervelocity Gouging
J. Pressure Vessel Technol. February 2007, 129(1): 133–141.
doi: https://doi.org/10.1115/1.2389030
Topics:
Chisels
,
Cooling
,
Rails
,
Steel
,
Temperature
,
Heat
,
Heat conduction
,
Optical microscopy
,
Shear (Mechanics)
,
Scanning electron microscopes
Plastic Zone Coalescence and Edge Break Conditions of Internal Cracks in a Semi-infinite Sheet
J. Pressure Vessel Technol. February 2007, 129(1): 142–147.
doi: https://doi.org/10.1115/1.2389031
Topics:
Fracture (Materials)
,
Stress
Asset Management Evaluation: A Pilot Case Study
J. Pressure Vessel Technol. February 2007, 129(1): 148–154.
doi: https://doi.org/10.1115/1.2389032
Topics:
Algorithms
,
Computer software
,
Economics
,
Maintenance
,
Safety
,
Probability
,
Density
,
Turbines
,
Decision making
,
Industrial plants
Use of Duplex Stainless Steel in Economic Design of a Pressure Vessel
J. Pressure Vessel Technol. February 2007, 129(1): 155–161.
doi: https://doi.org/10.1115/1.2389034
Topics:
Design
,
Finite element analysis
,
Hardening
,
Nozzles
,
Pressure vessels
,
Stainless steel
,
Stress
,
Membranes
,
Steel
A Study on Fluid Excitation Forces Acting on a Rotated Square Tube Bundle of in Cross-Flow
J. Pressure Vessel Technol. February 2007, 129(1): 162–168.
doi: https://doi.org/10.1115/1.2409315
Topics:
Excitation
,
Fluids
,
Drag (Fluid dynamics)
,
Vibration
Eddy Current Examination of Fatigue Cracks in Inconel Welds
J. Pressure Vessel Technol. February 2007, 129(1): 169–174.
doi: https://doi.org/10.1115/1.2435718
Application of an Ultrasonic Technique to Assess Contact Performance of Bolted Joints
J. Pressure Vessel Technol. February 2007, 129(1): 175–185.
doi: https://doi.org/10.1115/1.2435719
Topics:
Bolted joints
,
Pressure
,
Calibration
,
Finite element model
,
Reflection
,
Stress
Review and Consideration of Unsettled Problems on Evaluation of Fatigue Damage in LWR Water
J. Pressure Vessel Technol. February 2007, 129(1): 186–194.
doi: https://doi.org/10.1115/1.2409316
Topics:
Fatigue
,
Fatigue life
,
Stainless steel
,
Water
,
Light water reactors
,
Fatigue damage
,
Carbon
,
Boiling water reactors
,
Steel
,
Flow (Dynamics)
Development of an Improved Methodology for Predicting Airblast Pressure Relief on a Directly Loaded Wall
J. Pressure Vessel Technol. February 2007, 129(1): 195–204.
doi: https://doi.org/10.1115/1.2409317
Topics:
Pressure
,
Waves
,
Impulse (Physics)
Selecting Suitable Probes Distances for Sizing Deep Surface Cracks Using the DCPD Technique
J. Pressure Vessel Technol. February 2007, 129(1): 205–210.
doi: https://doi.org/10.1115/1.2409319
Topics:
Fracture (Materials)
,
Probes
,
Surface cracks
,
Sensors
Design Innovation Papers
A Single Technically Consistent Design Formula for the Thickness of Cylindrical Sections Under Internal Pressure
J. Pressure Vessel Technol. February 2007, 129(1): 211–215.
doi: https://doi.org/10.1115/1.2389035
High Pressure Hydrogen Storage Tank: A Parametric Design Study
J. Pressure Vessel Technol. February 2007, 129(1): 216–222.
doi: https://doi.org/10.1115/1.2389036
Topics:
Density
,
Exterior walls
,
High pressure (Physics)
,
Hydrogen
,
Hydrogen storage
,
Pressure
,
Pressure vessels
,
Finite element analysis
Email alerts
RSS Feeds
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)