Skip Nav Destination
Issues
November 2002
ISSN 0094-9930
EISSN 1528-8978
In this Issue
Technical Papers
Stress Analysis and Determination of Bolt Preload in Pipe Flange Connections With Gaskets Under Internal Pressure
Toshiyuki Sawa, Mem. ASME, Associate Professor, Naofumi Ogata, Graduate Student, Takahito Nishida, Director,
J. Pressure Vessel Technol. November 2002, 124(4): 385–396.
doi: https://doi.org/10.1115/1.1511736
Topics:
Flange connections
,
Gaskets
,
Pipes
,
Pressure
,
Stress
,
Finite element methods
,
Leakage
,
Stress analysis (Engineering)
,
Stress concentration
,
Elasticity
Design Procedures for an FRP Stub-Flange Joint
J. Pressure Vessel Technol. November 2002, 124(4): 397–404.
doi: https://doi.org/10.1115/1.1486016
Weld Characterization and Residual Stress Measurements for TC-128B Steel Plate
J. Pressure Vessel Technol. November 2002, 124(4): 405–414.
doi: https://doi.org/10.1115/1.1487878
Topics:
Neutron diffraction
,
Steel
,
Stress
,
Welded joints
,
Residual stresses
,
Railway tank cars
Analysis of the Thermal Hydraulic Consequences Following Common Mode Pump Seizure in a Nuclear Power Plant
J. Pressure Vessel Technol. November 2002, 124(4): 415–417.
doi: https://doi.org/10.1115/1.1465437
Topics:
Heat transfer
,
Nuclear power stations
,
Pressure
,
Pumps
,
Coolants
,
Heavy water reactors
,
Flow (Dynamics)
,
Heat
,
Earthquakes
Avoiding Thermoacoustic Vibration in Burner/Furnace Systems
J. Pressure Vessel Technol. November 2002, 124(4): 418–424.
doi: https://doi.org/10.1115/1.1462623
Topics:
Acoustics
,
Furnaces
,
Vibration
,
Waves
,
Stability
,
Oscillations
,
Mode shapes
Limit Loads for Layered Structures Using Extended Variational Principles and Repeated Elastic Finite Element Analysis
J. Pressure Vessel Technol. November 2002, 124(4): 425–432.
doi: https://doi.org/10.1115/1.1498845
Topics:
Finite element analysis
,
Stress
,
Deformation
,
Variational principles
Limit Load Estimation Using Plastic Flow Parameter in Repeated Elastic Finite Element Analyses
J. Pressure Vessel Technol. November 2002, 124(4): 433–439.
doi: https://doi.org/10.1115/1.1499960
Topics:
Deformation
,
Finite element analysis
,
Stress
,
Cylinders
Investigating the Interaction Behavior Between Two Arbitrarily Oriented Surface Cracks Using Multilevel Substructuring
J. Pressure Vessel Technol. November 2002, 124(4): 440–445.
doi: https://doi.org/10.1115/1.1465439
Topics:
Fracture (Materials)
,
Stress
,
Surface cracks
,
Tension
,
Finite element analysis
The Mixed-Mode Fracture Analysis of Multiple Embedded Cracks in a Semi-Infinite Plane by an Analytical Alternating Method
J. Pressure Vessel Technol. November 2002, 124(4): 446–456.
doi: https://doi.org/10.1115/1.1493204
Topics:
Fracture (Materials)
Finite Element Simulation of the Tightening Process of Bolted Joint With a Bolt Heater
J. Pressure Vessel Technol. November 2002, 124(4): 457–464.
doi: https://doi.org/10.1115/1.1493205
Topics:
Bolted joints
,
Contact resistance
,
Finite element analysis
,
Heating
,
Temperature
,
Simulation
,
Numerical analysis
,
Torque
Correlation of Test and FEA Results for the Nonlinear Behavior of Straight Pipes and Elbows
J. Pressure Vessel Technol. November 2002, 124(4): 465–475.
doi: https://doi.org/10.1115/1.1493806
Topics:
Finite element analysis
,
Pipes
Shape Sensitivity Analysis of Linear-Elastic Cracked Structures Under Mode-I Loading
J. Pressure Vessel Technol. November 2002, 124(4): 476–482.
doi: https://doi.org/10.1115/1.1486017
Topics:
Fracture (Materials)
,
Sensitivity analysis
,
Shapes
,
Stress
,
Displacement
Analysis of Possibility of Pressure Tube Cold Pressurization During ECCS Injection for a Small Break LOCA
J. Pressure Vessel Technol. November 2002, 124(4): 483–486.
doi: https://doi.org/10.1115/1.1465438
Cutting With High-Pressure Ammonia Jets for Demilitarization of Chemical Weapons
J. Pressure Vessel Technol. November 2002, 124(4): 487–492.
doi: https://doi.org/10.1115/1.1400755
Technical Brief
Estimation of Disk Burst Pressures Using Limit Analysis Collapse Loads
J. Pressure Vessel Technol. November 2002, 124(4): 493–494.
doi: https://doi.org/10.1115/1.1493807
Email alerts
RSS Feeds
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)