Abstract

A novel experimentally validated formulation is provided for the bearing friction torque component in threaded joints with spherical and conical contact geometry, by extending two-dimensional Motosh model for various scenarios of contact pressure. Data for the corresponding effective bearing friction radius is generated, using constant or sliding speed-dependent friction coefficient models. Generated bearing friction radius data are used in Motosh model for torque–tension test data to obtain the bearing friction coefficient, which is found to be reasonably comparable to published bearing friction data.

Issue Section:
Design and Analysis
Topics:
Bearings, Friction, Pressure, Torque

References

1.
Bickford
,
J.
,
1997
,
An Introduction to the Design and Analysis of Bolted Joints
, 3rd ed.,
Marcel Dekker
,
New York
.
2.
Bickford
,
J.
, and
Nassar
,
S.
,
1998
,
Handbook of Bolts and Bolted Joints
,
Marcel Dekker
,
New York
.
Google Scholar
Crossref
Search ADS
 
3.
Juvinall
,
R.
, and
Marshek
,
K.
,
2017
,
Fundamentals of Machine Component Design
, 6th ed.,
Wiley &Sons
,
New York
.
4.
Jiang
,
Y.
,
Chang
,
J.
, and
Lee
,
C.
,
2000
, “
An Experimental Study of Torque-Tension Relationship for Bolted Joints
,”
Int. J. Mater. Prod. Technol.
,
6
(
4/5
), pp.
417
–
429
.10.1504/IJMPT.2001.001264
Google Scholar
Crossref
Search ADS
 
5.
Motosh
,
N.
,
1976
, “
Development of Design Charts for Bolts Preloaded Up to the Plastic Range
,”
ASME J. Eng. Ind.
,
98
(
3
), pp.
849
–
851
.10.1115/1.3439041
Google Scholar
Crossref
Search ADS
 
6.
Shoberg
,
R.
,
1990
,
Manual for the T3 Torque-Tension-Friction Testing System
,
GSE
,
Farmington Hills, MI
.
7.
Nassar
,
S.
,
Barber
,
G.
, and
Zuo
,
D.
,
2005
, “
Bearing Friction Torque in Bolted Joints
,”
Tribol. Trans.
,
48
(
1
), pp.
69
–
75
.10.1080/05698190590899967
Google Scholar
Crossref
Search ADS
 
8.
Nassar
,
S. A.
,
El-Khiamy
,
H.
,
Barber
,
G. C.
,
Zou
,
Q.
, and
Sun
,
T. S.
,
2005
, “
An Experimental Study of Bearing and Thread Friction in Fasteners
,”
ASME J. Tribol.
,
127
(
2
), pp.
263
–
272
.10.1115/1.1843167
Google Scholar
Crossref
Search ADS
 
9.
Zaki
,
M.
,
Nassar
,
S.
, and
Yang
,
X.
,
2010
, “
Effect of Thread and Bearing Friction Coefficients on the Self-Loosening of Preloaded Countersunk-Head Bolts Under Periodic Transverse Excitation
,”
ASME J. Tribol.
,
132
(
3
), p.
031601
.10.1115/1.4001621
Google Scholar
Crossref
Search ADS
 
10.
Rabinowicz
,
E.
,
1965
,
Friction and Wear of Materials
,
Wiley
,
New York
, pp.
60
–
61
.
11.
ISO, 2012, “Fasteners – Torque/Clamp Force Testing – Amendment 1,” International Organization for Standardization, Geneva, Switzerland, Standard No. ISO 16047:2005/AMD 1:2012.
Copyright © 2020 by ASME
You do not currently have access to this content.