In spite of the fact that coke drums are subjected to cyclic thermal and mechanical loads, generally, they are not designed for cyclic loads. Thus, their operational life is much shorter than other pressure equipment in refineries. Due to information developed from surveys, it was determined that the major typical location of failure due to thermal fatigue in coke drums is the shell-to-skirt junction area. This paper focuses on temperature and stress characteristics and also the thermal fatigue life of the junction area. The main objective of this paper was to explore effect of the switching temperature on thermal fatigue life of the junction area. Four coke drums, currently in service have been considered in the analyses, named drums A, B, C, and D, identical in dimensions and with an operating cycle period of 48 h. Operational temperatures and strains have been measured and collected every minute. The number of measured cycles of coke drum A, B, C, and D were 52, 53, 53, and 54 cycles, respectively. Thus, a total of 212 cycles have been analyzed. The operational temperatures and strains were examined. Finite Element Method (FEM) analyses have been performed on the selected cycles in order to find the most severe location in the junction area. The strain history and FEM results were used to assess thermal fatigue life. The thermal fatigue lives were calculated based on low cycle fatigue properties using engineering steels for high temperature components issued by National Institute for Materials Sciences (NIMS) in Japan. The number of cycle to fracture versus switching temperature for the coke drums was then plotted. The curve best fitting criteria was then used to develop an equation relating the number of cycle to fracture as a function of switching temperature. The results show that the switching temperature strongly affects the number of cycle to fracture. These results can be used to provide the necessary information to operate coke drums safely in order to extend their useful lives.
Skip Nav Destination
Article navigation
December 2011
Research Papers
Study on the Effects of Switching Temperature on the Thermal Fatigue Life of the Shell-to-Skirt Junction of Coke Drum
Masaaki Oka,
Masaaki Oka
Department of Mechanical Systems of Engineering,
Muroran Institute of Technology
, 27-1 Mizumoto-cho, Muroran 050-8585, Japan
; S. H. I Examination and Inspection, Ltd.
, 1501 Imazaike, Saijo, Ehime 799-1393, Japan
Search for other works by this author on:
Himsar Ambarita,
Himsar Ambarita
Department of Mechanical Systems of Engineering,
Muroran Institute of Technology
, 27-1 Mizumoto-cho, Muroran 050-8585, Japan; Faculty of Engineering, Mechanical Engineering Department, Sumatera Utara University
, Jl. Almamater 20155 Medan, Indonesia
Search for other works by this author on:
Masashi Daimaruya,
Masashi Daimaruya
Department of Mechanical Systems of Engineering,
Muroran Institute of Technology
, 27-1 Mizumoto-cho, Muroran 050-8585, Japan; Faculty of Engineering, Mechanical Engineering Department, Sumatera Utara University
, Jl. Almamater 20155 Medan, Indonesia
Search for other works by this author on:
Hiroyuki Fujiki
Hiroyuki Fujiki
Department of Mechanical Systems of Engineering,
Muroran Institute of Technology
, 27-1 Mizumoto-cho, Muroran 050-8585, Japan; Faculty of Engineering, Mechanical Engineering Department, Sumatera Utara University
, Jl. Almamater 20155 Medan, Indonesia
Search for other works by this author on:
Masaaki Oka
Department of Mechanical Systems of Engineering,
Muroran Institute of Technology
, 27-1 Mizumoto-cho, Muroran 050-8585, Japan
; S. H. I Examination and Inspection, Ltd.
, 1501 Imazaike, Saijo, Ehime 799-1393, Japan
Himsar Ambarita
Department of Mechanical Systems of Engineering,
Muroran Institute of Technology
, 27-1 Mizumoto-cho, Muroran 050-8585, Japan; Faculty of Engineering, Mechanical Engineering Department, Sumatera Utara University
, Jl. Almamater 20155 Medan, Indonesia
Masashi Daimaruya
Department of Mechanical Systems of Engineering,
Muroran Institute of Technology
, 27-1 Mizumoto-cho, Muroran 050-8585, Japan; Faculty of Engineering, Mechanical Engineering Department, Sumatera Utara University
, Jl. Almamater 20155 Medan, Indonesia
Hiroyuki Fujiki
Department of Mechanical Systems of Engineering,
Muroran Institute of Technology
, 27-1 Mizumoto-cho, Muroran 050-8585, Japan; Faculty of Engineering, Mechanical Engineering Department, Sumatera Utara University
, Jl. Almamater 20155 Medan, Indonesia
J. Pressure Vessel Technol. Dec 2011, 133(6): 061210 (11 pages)
Published Online: October 31, 2011
Article history
Received:
May 4, 2010
Accepted:
March 29, 2011
Online:
October 31, 2011
Published:
October 31, 2011
Citation
Oka, M., Ambarita, H., Daimaruya, M., and Fujiki, H. (October 31, 2011). "Study on the Effects of Switching Temperature on the Thermal Fatigue Life of the Shell-to-Skirt Junction of Coke Drum." ASME. J. Pressure Vessel Technol. December 2011; 133(6): 061210. https://doi.org/10.1115/1.4004564
Download citation file:
Get Email Alerts
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)
Related Articles
Parametric FEA Study of Burst Pressure of Cylindrical Shell Intersections
J. Pressure Vessel Technol (June,2010)
Development of Fatigue Design Curves for Pressure Vessel Alloys Using a Modified Langer Equation
J. Pressure Vessel Technol (November,1979)
Leak Before Break Analysis of Steam Generator Shell Nozzle Junction for Sodium Cooled Fast Breeder Reactor
J. Pressure Vessel Technol (April,2012)
Fatigue Evaluation of API 12F Shop-Welded Tanks With a New Roof-to-Shell Junction Detail
J. Pressure Vessel Technol (October,2021)
Related Chapters
New Guidelines on Assessing the Risk of Fatigue Failure and Remaining Life of Ageing Pressure Vessels:
Ageing and Life Extension of Offshore Facilities
Various Applications of the Membrane Theory
Stress in ASME Pressure Vessels, Boilers, and Nuclear Components
Various Applications of the Membrane Theory
Design of Plate and Shell Structures