Since environmentally assisted cracking (EAC) is an important degradation mechanism affecting the structural materials of nuclear power plants, numerous EAC experiments have been performed in the past three decades using standard specimens in simulated high temperature water environments to evaluate the various core materials used in light water reactors (LWRs). However, the environment, the condition of the material, and the mechanical properties near flaws in LWR components are not absolutely equivalent to those near the crack tip in standard specimens; thus, more research needs to be done before EAC growth in an actual LWR component can be accurately estimated using existing experimental EAC data. By combining the film slip-dissolution/oxidation model with the elastic-plastic finite element method and existing experimental EAC data, we have derived a method by which an estimation of EAC growth at flaws in actual LWR components can be made. In this paper we propose and discuss the use of this method. The results show that this new method basically concurs with the Fracture Research Institute (FRI) model in evaluating EAC growth across a semi-elliptic crack front under a simple tensile load and is also in approximate agreement with the experimental results obtained in evaluating EAC growth along a semi-elliptic crack front under complex loading conditions. The approach is expected to form a bridge between predicting EAC growth rate in core materials and evaluating EAC growth in key structural components in LWRs, and it is also expected that it can be used as a pre-analytical tool for EAC experiments using nonstandard specimens.
Skip Nav Destination
Article navigation
February 2009
Research Papers
Quantitative Estimation of the Growth of Environmentally Assisted Cracks at Flaws in Light Water Reactor Components
H. Xue,
H. Xue
Fracture and Reliability Research Institute,
Tohoku University
, Sendai 980-8579, Japan and School of Mechanical Engineering, Xi'an University of Science and Technology
, Xi'an 710054, China
Search for other works by this author on:
Y. Sato,
Y. Sato
Fracture and Reliability Research Institute,
Tohoku University
, Sendai 980-8579, Japan
Search for other works by this author on:
T. Shoji
T. Shoji
Fracture and Reliability Research Institute,
Tohoku University
, Sendai 980-8579, Japan
Search for other works by this author on:
H. Xue
Fracture and Reliability Research Institute,
Tohoku University
, Sendai 980-8579, Japan and School of Mechanical Engineering, Xi'an University of Science and Technology
, Xi'an 710054, China
Y. Sato
Fracture and Reliability Research Institute,
Tohoku University
, Sendai 980-8579, Japan
T. Shoji
Fracture and Reliability Research Institute,
Tohoku University
, Sendai 980-8579, JapanJ. Pressure Vessel Technol. Feb 2009, 131(1): 011404 (9 pages)
Published Online: November 26, 2008
Article history
Received:
June 13, 2007
Revised:
January 22, 2008
Published:
November 26, 2008
Citation
Xue, H., Sato, Y., and Shoji, T. (November 26, 2008). "Quantitative Estimation of the Growth of Environmentally Assisted Cracks at Flaws in Light Water Reactor Components." ASME. J. Pressure Vessel Technol. February 2009; 131(1): 011404. https://doi.org/10.1115/1.3027458
Download citation file:
Get Email Alerts
Related Articles
On the Path-Dependence of the J -Integral Near a Stationary Crack in an Elastic-Plastic Material
J. Appl. Mech (January,2011)
Burst Speed Prediction of Impellers With Critical Strain Criteria
J. Eng. Gas Turbines Power (February,2024)
Surface Effects on the Near-Tip Stresses for Mode-I and Mode-III Cracks
J. Appl. Mech (January,2008)
Multiscale Experiments: State of the Art and Remaining Challenges
J. Eng. Mater. Technol (October,2009)
Related Proceedings Papers
Related Chapters
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Compromise between Tensile and Fatigue Strength
New Advanced High Strength Steels: Optimizing Properties
Introductory Information
The Stress Analysis of Cracks Handbook, Third Edition