An optical method is presented for the real-time monitoring of the bolt tightening process that provides the necessary clamping force in bolted assemblies. The method uses the 3D electronic speckle pattern interferometry (ESPI) technique to measure and monitor the joint deformation and strain fields in the joint around the tightened fastener, and establish a reliable correlation with the clamp load provided by the fastener tightening. Because the relationship between the clamp load and joint deformation is independent of the frictional variables of the fastener, the direct monitoring of the deformation and strain fields in the clamped joint would provide a more reliable measure of the clamp load level, as compared to the conventional reliance on the tightening torque to predict the resulting clamp load level. This technique is beneficial, especially for monitoring, with high precision, the proper tightening of critical bolted connections such as those used in many pressure vessels in the nuclear power industry. The validity of the optical technique is also ascertained by comparing the results to that obtained by using finite element analysis and other classical mechanics of materials methods.
Skip Nav Destination
Article navigation
February 2007
Research Papers
Optical Monitoring of Bolt Tightening Using 3D Electronic Speckle Pattern Interferometry
Sayed A. Nassar,
Sayed A. Nassar
Fastening and Joining Research Institute Department of Mechanical Engineering,
Oakland University
, Rochester, MI 48309
Search for other works by this author on:
Aidong Meng
Aidong Meng
Fastening and Joining Research Institute Department of Mechanical Engineering,
Oakland University
, Rochester, MI 48309
Search for other works by this author on:
Sayed A. Nassar
Fastening and Joining Research Institute Department of Mechanical Engineering,
Oakland University
, Rochester, MI 48309
Aidong Meng
Fastening and Joining Research Institute Department of Mechanical Engineering,
Oakland University
, Rochester, MI 48309J. Pressure Vessel Technol. Feb 2007, 129(1): 89-95 (7 pages)
Published Online: January 4, 2006
Article history
Received:
May 9, 2005
Revised:
January 4, 2006
Citation
Nassar, S. A., and Meng, A. (January 4, 2006). "Optical Monitoring of Bolt Tightening Using 3D Electronic Speckle Pattern Interferometry." ASME. J. Pressure Vessel Technol. February 2007; 129(1): 89–95. https://doi.org/10.1115/1.2389024
Download citation file:
Get Email Alerts
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)
Related Articles
A Novel Optical Method for Real-Time Control of Bolt Tightening
J. Pressure Vessel Technol (December,2011)
Peripapillary and Posterior Scleral Mechanics—Part II: Experimental and Inverse Finite Element Characterization
J Biomech Eng (May,2009)
Analytical and Experimental Investigation of Self-Loosening of Preloaded Cap Screw Fasteners
J. Vib. Acoust (June,2011)
Validation of Electronic Package Reliability Using Speckle Interferometry
J. Electron. Packag (September,2002)
Related Proceedings Papers
Related Chapters
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading
Basic Features
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading
Stress Concentration Factors in Multiple Row Joints
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading