... curve. Multiaxial fatigue analysis is used to model the fretting fatigue accurately, considering the change in contact geometries due to wear. Additional parameters, not just stress and strain, are considered. A crucial parameter used extensively in the literature on fretting fatigue is the Smith–Watson...

... 2023 30 04 2024 03 05 2024 30 07 2024 Graphical Abstract Figure dynamics of structures flexible risers dimension-reduction method fatigue analysis bimodal sea states Increasingly, gas and oil industries have been challenged to exploit petroleum in more...

... Investigation on Dynamic Stiffness of Damaged Synthetic Fiber Ropes for Deepwater Moorings ,” ASME J. Offshore Mech. Arct. Eng. , 137 ( 6 ), p. 061401 . 10.1115/1.4031392 [23] Huang , W. , Liu , H. X. , Shan , G. M. , and Hu , C. , 2011 , “ Fatigue Analysis of the Taut-Wire Mooring...

... York . Montgomery , D. C. , and Runger , G. C. , 1998 , Applied Statistics and Probability for Engineers , 2nd ed , Wiley , New York . Kelma , S. , and Schaumann , P. , 2015 , “ Probabilistic Fatigue Analysis of Jacket Support Structures for Offshore Wind Turbines...

...Haiyan Long; Geir Moe The fatigue assessment of support structures is one of the most significant challenges in the design of offshore wind turbines (OWT). Fatigue analysis can be conducted in either the time-domain or the frequency-domain. The advantage of frequency-domain analysis is its time...

.... In this paper, only wave class C ( H s from 1.0 m to 2.0 m and T p from 2.5 s to 5.1 s) is considered. Structural failure of a steel plant probably caused by fatigue has recently been reported for a location classified as wave class C, see Ref. 5 . The fatigue analysis methodology...