Abstract

Cable-driven parallel robots (CDPRs) offer high payload capacities, large translational workspace and high dynamic performances. The rigid base frame of the CDPR is connected in parallel to the moving platform using cables. However, their orientation workspace is usually limited due to cable/cable and cable/moving platform collisions. This paper deals with the design, modelling and prototyping of a hybrid robot. This robot, which is composed of a CDPR mounted in series with a Parallel Spherical Wrist (PSW), has both a large translational workspace and an unlimited orientation workspace. It should be noted that the six-degrees-of-freedom (DOF) motions of the moving platform of the CDPR, namely, the base of the PSW, and the three-DOF motion of the PSW are actuated by means of eight actuators fixed to the base. As a consequence, the overall system is underactuated, and its total mass and inertia in motion is reduced.

References

1.
Hussein
,
H.
,
Santos
,
J. C.
, and
Gouttefarde
,
M.
,
2018
, “
Geometric Optimization of a Large Scale CPDR Operating on a Building Facade
,”
IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
,
Madrid, Spain
,
IEEE
, pp.
5117
5124
.
2.
Kawamura
,
S.
,
Choe
,
W.
,
Tanaka
,
S.
, and
Pandian
,
S. R.
,
1995
, “
Development of An Ultrahigh Speed Robot Falcon Using Wire Drive System
,”
Proceedings of 1995 IEEE International Conference on Robotics and Automation
,
Nagoya, Aichi, Japan
,
IEEE
, pp.
215
220
.
3.
Gagliardini
,
L.
,
Caro
,
S.
,
Gouttefarde
,
M.
, and
Girin
,
A.
,
2016
, “
Discrete Reconfiguration Planning for Cable-Driven Parallel Robots
,”
Mech. Mach. Theory.
,
100
, pp.
313
337
.
4.
Rasheed
,
T.
,
Long
,
P.
, and
Caro
,
S.
,
2020
, “
Wrench-Feasible Workspace of Mobile Cable-Driven Parallel Robots
,”
ASME J. Mech. Rob.
,
12
(
3
), p.
031009
.
5.
Qian
,
S.
,
Zi
,
B.
,
Shang
,
W.-W.
, and
Xu
,
Q.-S.
,
2018
, “
A Review on Cable-driven Parallel Robots
,”
Chinese J. Mech. Eng.
,
31
(
1
), p.
1007
. PII: 267.
6.
Picard
,
E.
,
Caro
,
S.
,
Plestan
,
F.
, and
Claveau
,
F.
,
2018
, “
Control Solution for a Cable-Driven Parallel Robot With Highly Variable Payload
,”
Proceedings of the ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE 2018
,
Quebec, QC, Canada
,
Aug. 26–29
,
ASME
7.
Blanchet
,
L.
, and
Merlet
,
J.-P.
,
2014
, “
Interference Detection for Cable-Driven Parallel Robots (cdprs)
,”
2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics
,
Quebec, QC, Canada
,
ASME
, pp.
1413
1418
.
8.
Bak
,
J.-H.
,
Hwang
,
S. W.
,
Yoon
,
J.
,
Park
,
J. H.
, and
Park
,
J.-O.
,
2019
, “
Collision-Free Path Planning of Cable-Driven Parallel Robots in Cluttered Environments
,”
Intel. Service Rob.
,
12
(
3
), pp.
243
253
. PII: 278.
9.
Merlet
,
J.-P.
,
2006
,
Parallel Robots
(
Solid Mechanics and Its Applications
, 2nd ed., Vol.
74
,
Kluwer Academic Publishers
.
10.
Miermeister
,
P.
, and
Pott
,
A.
,
2014
, “Design of Cable-Driven Parallel Robots With Multiple Platforms and Endless Rotating Axes,”
Interdisciplinary Applications of Kinematics
, Vol.
26
,
Kecskemthy
,
A.
, and
Geu Flores
,
F.
, eds.,
Mechanisms and Machine Science, Springer
,
Berlin
, pp.
21
29
.
11.
Nagai
,
K.
,
Le Nhat
,
T.
,
Hayashi
,
Y.
, and
Ito
,
K.
,
2011
, “
Proposal of a Redundant Drive Wire Mechanism for Producing Motions With High Acceleration and High Precision
,”
2011 IEEE/SICE International Symposium on System Integration
,
Kyoto, Japan
,
IEEE
, pp.
1049
1054
.
12.
Nagai
,
K.
,
Le
,
T. N.
,
Hayashi
,
Y.
, and
Ito
,
K.
,
2012
, “
Kinematical Analysis of Redundant Drive Wire Mechanisms With Velocity Constraint
,”
2012 IEEE International Conference on Mechatronics and Automation
,
Chengdu, China
,
IEEE
, pp.
1496
1501
.
13.
Khakpour
,
H.
, and
Birglen
,
L.
,
2014
, “
Workspace Augmentation of Spatial 3-DOF Cable Parallel Robots Using Differential Actuation
,”
2014 IEEE/RSJ International Conference on Intelligent Robots and Systems
,
Chicago, IL
,
IEEE
, pp.
3880
3885
.
14.
Khakpour
,
H.
,
Birglen
,
L.
, and
Tahan
,
S.-A.
,
2014
, “
Synthesis of Differentially Driven Planar Cable Parallel Manipulators
,”
IEEE Trans. Rob.
,
30
(
3
), pp.
619
630
.
15.
Khakpour
,
H.
,
Birglen
,
L.
, and
Tahan
,
S.-A.
,
2015
, “
Analysis and Optimization of a New Differentially Driven Cable Parallel Robot
,”
ASME J. Mech. Rob.
,
7
(
3
), p.
034503
.
16.
Liu
,
H.
,
Gosselin
,
C.
, and
Lalibert
,
T.
,
2012
, “
Conceptual Design and Static Analysis of Novel Planar Spring-loaded Cable-Loop-Driven Parallel Mechanisms
,”
ASME J. Mech. Rob.
,
4
(
2
), p.
021001
.
17.
Vikranth Reddy
,
M.
,
Praneet
,
N. C.
, and
Ananthasuresh
,
G. K.
,
2019
, “Planar Cable-driven Robots with Enhanced Orientability,”
Cable-Driven Parallel Robots
, Vol.
74
,
Pott
,
A.
, and
Bruckmann
,
T.
, eds.,
Mechanisms and Machine Science
,
Springer International Publishing
,
Berlin
, pp.
3
12
.
18.
Lessanibahri
,
S.
,
Cardou
,
P.
, and
Caro
,
S.
,
2018
, “
Kinetostatic Analysis of a Simple Cable-Driven Parallel Crane
,”
Volume 5A: 42nd Mechanisms and Robotics Conference
,
Quebec, QC, Canada
,
American Society of Mechanical Engineers
.
19.
Lessanibahri
,
S.
,
Cardou
,
P.
, and
Caro
,
S.
,
2019
, “
A Cable-Driven Parallel Robot With An Embedded Tilt-Roll Wrist
,” Volume 5A:
43rd Mechanisms and Robotics Conference
,
Anaheim, CA
,
American Society of Mechanical Engineers
.
20.
Le
,
T. N.
,
Dobashi
,
H.
, and
Nagai
,
K.
,
2016
, “
Configuration of Redundant Drive Wire Mechanism Using Double Actuator Modules
,”
Robomech. J.
,
3
(
1
), p.
25
. PII: 63.
21.
Lessanibahri
,
S.
,
Cardou
,
P.
, and
Caro
,
S.
,
2020
, “
A Cable-Driven Parallel Robot With An Embedded Tilt-Roll Wrist
,”
ASME J. Mech. Rob.
,
12
(
2
), p.
021107
.
22.
Hayes
,
M.
, and
Langlois
,
R. G.
,
2005
, “
Atlas: A Novel Kinematic Architecture for Six DOF Motion Platforms
,”
Trans. Canadian Soc. Mech. Eng.
,
29
(
4
), pp.
701
709
.
23.
Platis
,
A.
,
Rasheed
,
T.
,
Cardou
,
P.
, and
Caro
,
S.
,
2017
, “Isotropic Design of the Spherical Wrist of a Cable-driven Parallel Robot,”
Advances in Robot Kinematics
, Vol.
4
,
Lenaričič
,
J.
, and
Merlet
,
J.-P.
, eds.,
Springer Proceedings in Advanced Robotics
,
Springer Berlin Heidelberg
, pp.
321
330
.
24.
Ball
,
R. S.
,
1900
,
A Treatise on the Theory of Screws, by Sir Robert Stawell Ball
,
Cambridge University Press
,
Cambridge
,.
You do not currently have access to this content.