This paper deals with face gear design. The goal is to propose a simple formula for predicting the width of the wheel as a function of the main design parameters. A specific software was used to achieve this goal. This numerical tool is able to simulate the geometry and the quasistatic loaded behavior of a face gear. The statistical method used for analyzing the influence of data is described: The design of experiments leads to a simple regression model taking into account the influential parameters and their couplings. In the last part of this paper, the results of the formulas are compared to those of the software and an optimal design is proposed based on the regression model.
Issue Section:
Technical Briefs
1.
Baastein
, G.
, 1994, “Cylkro Gears–A New Challenge
,” Translation from “Antriebstechnik,” Vol. 33
, No. 11
, p. 4
.2.
Francis
, V.
, and Silvagi
, J.
, 1950, “Face Gear Design Factors
,” Prod. Eng. (N.Y.)
0032-9754, 21
, pp. 117
–121
.3.
Litvin
, F. L.
, 2000, “Handbook of Face Gear Drives With a Spur Involute Pinion
,” NASA Final Contractor Report No. CR-209909.4.
Litvin
, F. L.
, Egelja
, A.
, Tan
, J.
, and Heath
, G.
, 1998, “Computerized Design, Generation and Simulation of Meshing of Orthogonal Face-Gear Drive With a Spur Involute Pinion With Localized Bearing Contact
,” Mech. Mach. Theory
0094-114X, 33
(1
), pp. 87
–102
.5.
Litvin
, F. L.
, Zhang
, Y.
, Wang
, J. C.
, Bossier
, R. B.
, Jr.,, and Chen
, Y. J. D.
, 1992, “Design and Geometry of Face Gear Drives
,” ASME J. Mech. Des.
1050-0472, 114
, pp. 642
–647
.6.
Baastein
, G.
, and Sijtstra
, A.
, 1993, New Developments in Design, Manufacturing and Applications of Cylkro (Face) Gears, AGMA Technical Paper No. 93FTM7.7.
Buckingham
, E.
, 1949, Analytical Mechanics of Gears
, Dover
, New York
, p. 546
.8.
Guingand
, M.
, de Vaujany
, J. P.
, and Jacquin
, C. Y.
, 2005, “Quasi-Static Analysis of a Face Gear Under Torque
,” Comput. Methods Appl. Mech. Eng.
0045-7825, 194
(39–41
), pp. 4301
–4318
.9.
Guingand
, M.
, de Vaujany
, J. P.
, and Icard
, Y.
, 2005, “Analysis and Optimization of the Loaded Meshing of a Face Gear
,” ASME J. Mech. Des.
1050-0472, 127
, pp. 135
–143
.10.
Jacquin
, C.-Y.
, 2001, “Modélisation et Optimisation du Comportement sous Charge des Engrenages Face
,” Ph.D., thesis, Lyon, France.11.
Anthony
, J.
, 2003, Design of Experiments for Engineers and Scientists
, Elsevier
, Amsterdam
, p. 176
.12.
Montgomery
, D. C.
, 2005, Design and Analysis of Experiments
, 6th ed., Wiley
, New York
, p. 660
.Copyright © 2008
by American Society of Mechanical Engineers
You do not currently have access to this content.