... alumina ceramics coatings cooling elastic constants elastic moduli melt infiltration plasma arc sprayed coatings titanium compounds viscoelasticity ceramic coating viscoelastic infiltrate vibration damping It is convenient to use an intermediate variable, E 1 − ave...

.... This paper reports the initial research for the size effects on the microstructure and mechanical properties of AlCoCrFeNi high entropy alloy. We found that as the cooling rate was increased, both the strength and the plasticity are enhanced significantly due to the grain refinement and the abatement...

...—mechanical loading at constant temperature, cooling under constant stress, and recovery stress tests are presented and confronted with results. Otsuka , K. , and Ren , X. , 2005 , “ Physical Metallurgy of Ti-Ni Based Shape Memory Alloys ,” Prog. Mater. Sci. 0079-6425 10.1016/j.pmatsci...

..., pp. 85–116 ) was used to model creep deformation. A multidimensional residual stress state due to cooling from the molten state was considered in the simulations. Two damage parameters, Findley and equivalent plastic strain, were employed to estimate cyclic damage. While the life estimates are crude...

.... 07 December 2001 20 June 2002 04 04 2003 welding internal stresses stress analysis finite element analysis cooling fatigue thermomechanical treatment Spot welding, or resistance spot welding, involves the joining of two or more pieces of sheet metal in localized areas...

.... Associate Editor: G. Johnson. 28 September 1999 18 September 2000 04 04 2003 stress-strain relations Weibull distribution internal stresses plasticity plastic deformation heat treatment finite element analysis cooling thermal expansion recovery X-ray diffraction...

..., with conventional coolant and with through-the tool coolant. The results provided strong evidence that the conventional application of coolant was having no beneficial effect on the cutting operation compared to dry drilling. However, through-tool cooling gave a significant improvement in performance in terms...

...Chuwei Zhou; Wei Yang; Daining Fang Mechanical properties and damage evolution of short-fiber-reinforced metal matrix composites (MMC) are studied under a micromechanics model accounting for the history of cooling and thermal cycling. A cohesive interface is formulated in conjunction...