The microstructure development was investigated in torsion deformed NiAl. High strain torsion of solid bars was done with a Paterson rock deformation machine at temperatures between 700 K and 1300 K under a confining pressure of 400 MPa. The maximum shear strains and shear strain rates applied were 19 and , respectively. The shear stress–shear strain curves are characterized by a peak at low shear strains, which is followed by softening and a steady state at high shear strains. Increasing shear strain leads to grain refinement, with the average grain size decreasing with temperature. Moreover, a steady state grain aspect ratio and inclination of the grain long axis with respect to the shear plane is observed. With increasing shear strain, the fraction of low angle grain boundaries goes over a maximum and approaches a steady state of about 20–40%. The development of the microstructure is characterized by two different temperature regimes. Up to 1000 K, continuous dynamic recrystallization characterized by limited grain growth takes place, leading to a transformation of low into high angle grain boundaries. At temperatures above 1000 K, discontinuous dynamic recrystallization occurs by massive grain growth. The results are qualitatively discussed on the basis of models dealing with dynamic recrystallization.
Skip Nav Destination
e-mail: werner.skrotzki@physik.tu-dresden.de
Article navigation
January 2009
Shear Behavior And Related Mechanisms In Materials Plasticity
Microstructure Development During High Strain Torsion of NiAl
Burghardt Klöden,
Burghardt Klöden
Institut für Strukturphysik,
Technische Universität Dresden
, D-01062 Dresden, Germany
Search for other works by this author on:
Carl-Georg Oertel,
Carl-Georg Oertel
Institut für Strukturphysik,
Technische Universität Dresden
, D-01062 Dresden, Germany
Search for other works by this author on:
Werner Skrotzki,
Werner Skrotzki
Institut für Strukturphysik,
e-mail: werner.skrotzki@physik.tu-dresden.de
Technische Universität Dresden
, D-01062 Dresden, Germany
Search for other works by this author on:
Erik Rybacki
Erik Rybacki
Geoforschungszentrum Potsdam
, D-14473 Potsdam, Germany
Search for other works by this author on:
Burghardt Klöden
Institut für Strukturphysik,
Technische Universität Dresden
, D-01062 Dresden, Germany
Carl-Georg Oertel
Institut für Strukturphysik,
Technische Universität Dresden
, D-01062 Dresden, Germany
Werner Skrotzki
Institut für Strukturphysik,
Technische Universität Dresden
, D-01062 Dresden, Germanye-mail: werner.skrotzki@physik.tu-dresden.de
Erik Rybacki
Geoforschungszentrum Potsdam
, D-14473 Potsdam, GermanyJ. Eng. Mater. Technol. Jan 2009, 131(1): 011101 (9 pages)
Published Online: December 18, 2008
Article history
Received:
January 19, 2008
Revised:
August 7, 2008
Published:
December 18, 2008
Citation
Klöden, B., Oertel, C., Skrotzki, W., and Rybacki, E. (December 18, 2008). "Microstructure Development During High Strain Torsion of NiAl." ASME. J. Eng. Mater. Technol. January 2009; 131(1): 011101. https://doi.org/10.1115/1.3030882
Download citation file:
Get Email Alerts
Cited By
Modeling Growth and Viscous Flow of Oxide on Cylindrical Silicon Surfaces Including Piezoviscous Inhibition
J. Eng. Mater. Technol (April 2025)
Thermal Conductivity of 3D-Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process
J. Eng. Mater. Technol (April 2025)
Related Articles
Analysis of Large Strain Hot Torsion Textures Associated With “Continuous” Dynamic Recrystallization
J. Eng. Mater. Technol (January,2009)
Thermo-Mechanical Modeling of Hot Forging Process
J. Eng. Mater. Technol (October,2004)
Enhancing Microstructural, Textural, and Mechanical Properties of Al–Ti Dissimilar Joints via Static Shoulder Friction Stir Welding
J. Manuf. Sci. Eng (February,2024)
Distributions of Stretch and Rotation in Polycrystalline OFHC Cu
J. Eng. Mater. Technol (July,2002)
Related Proceedings Papers
Related Chapters
The Relation between Cold-Work-Induced Microstructural Evolution and the Postannealing Grain Structures in Zircaloy-4
Zirconium in the Nuclear Industry: 20th International Symposium
Grain Size and Grain-Boundaries Consequences on Diffusion and Trapping of Hydrogen in Pure Nickel
International Hydrogen Conference (IHC 2012): Hydrogen-Materials Interactions
Microstructure Evolution and Physics-Based Modeling
Ultrasonic Welding of Lithium-Ion Batteries