... reflect the growth of microbubbles, the aggregation of multiple bubbles, and the floating movement of bubbles. Then, a series of experiments were carried out to reveal bubble static behaviors, and further bubble explosion behaviors on surface integrity, surface defects, and hardness were analyzed...

...Mohammad Uddin; Remi Santifoller; Colin Hall; Thomas Schlaefer This paper presents the influence of the grinding-burnishing on surface integrity and corrosion performance of the laser-cladded AISI 431 alloys. As-cladded specimens were first ground followed by ball burnishing. To evaluate surface...

...B. Huang; Y. Kaynak; Y. Sun; M. K. Khraisheh; I. S. Jawahir Burnishing has been increasingly utilized to improve the surface integrity of manufactured components. The generation of surface and subsurface layers with ultrafine grains, attributed to severe plastic deformation (SPD) and dynamic...

..., the alloys are prone to produce serrated chips, which have a serious influence on surface integrity. In this study, a coupled Eulerian–Lagrangian method is used to simulate the orthogonal cutting of Ti6Al4V due to its advantages of avoiding element distortion and improving the data extraction efficiency...

... is a significant concern. The combination of mechanical, thermal, and chemical properties of Inconel 718 has made it a difficult-to-machine material. Despite recent advances in machining Inconel 718, achieving desired surface integrity with prescribed properties is still not possible. Different machining...

... ) and carbon dioxide (CO 2 ) as cryogenic coolants. The experimental data on the cutting temperature, tool wear, force components, chip breakability, dimensional accuracy, and surface integrity characteristics are presented and were analyzed to evaluate the machining process of this alloy and resulting surface...

... of the composites. (ii) Parametric analysis to study the influence of process parameters, such as waterjet pressure, jet traverse rate, standoff distance, and number of passes, on the quality of the milled surface by generating a number of pockets at various process parameters. (iii) Surface integrity...