... among rare earth permanent magnets, are needed for building more efficient windmill generators, electric vehicle motors, etc. Currently, near-net shape magnets can be either made through sintering and compression molding with extensive post machining or directly through injection molding. However...

...Xiaohua Liu; Lin Zhang; Wenchen Zhou; Tianfeng Zhou; Jianfeng Yu; L. James Lee; Allen Y. Yi Injection molding of plastic optical lenses prevails over many other techniques in both efficiency and cost; however, polymer shrinkage during cooling, high level of uneven residual stresses, and refractive...

.... Manuscript received December 15, 2017; final manuscript received June 2, 2018; published online August 31, 2018. Assoc. Editor: Karl R. Haapala. 15 12 2017 02 06 2018 Injection molding Machine tool dynamics Machining processes Sustainable manufacturing Quality control...

.... Assoc. Editor: Laine Mears. 15 11 2017 12 06 2018 Injection molding Metrology Sensing Monitoring Quality control Diagnostics Leakage is an important issue of concern in manufacturing industry. When the leakage occurs, it is a huge danger which can cause resources waste...

...; published online July 9, 2018. Assoc. Editor: Zhijian J. Pei. 20 12 2017 19 05 2018 Additive manufacturing Advanced materials Design for manufacturing Injection molding Polymer fabrication processes Processing Efficient lightweight structures are a tradeoff between...

... Melt density (g/cm 3 ) Solid density (g/cm 3 ) Maximum shear stress (MPa) Processing temperature (°C) 1055.7 0.64 0.8052 0.9513 0.5 185–226 The authors fabricated a specialized experimental setup, shown in Fig. 9( a ) composed of an injection molding machine (Engel VC 200/30...

... March 18, 2018; published online May 21, 2018. Assoc. Editor: Donggang Yao. 05 11 2017 18 03 2018 Additive manufacturing Injection molding Rapid prototyping Welding Polymer fabrication processes Solid freeform fabrication Joining Despite its disruptive potential...

.... 1 Corresponding author. Manuscript received August 11, 2017; final manuscript received March 8, 2018; published online May 21, 2018. Assoc. Editor: Donggang Yao. 11 08 2017 08 03 2018 Control Injection molding Polymer fabrication processes Automation Extrusion...

... ], hindering the potential of mass production of these composite parts. Injection molding Modeling and simulation Tribology in manufacturing Polymer fabrication processes References [1] Che , D. M. , Saxena , I. , Han , P. D. , Guo , P. , and Ehmann , K. F. , 2014...

...://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2676044 Manuscript received July 28, 2017; final manuscript received March 5, 2018; published online April 16, 2018. Assoc. Editor: Laine Mears. 28 07 2017 05 03 2018 Injection molding Machine tool dynamics Machining processes Metrology Modeling...

...) are available in the machine and the time mode was selected in this study. More details of the welding setup can be seen in Ref. [ 22 ]. Fig. 1 Schematic for ultrasonic welding of injection-molded carbon fiber reinforced nylon 66 composite (dimensions in mm) Single lap-shear specimen configuration...

... received June 21, 2017; final manuscript received December 22, 2017; published online February 15, 2018. Assoc. Editor: Radu Pavel. 21 06 2017 22 12 2017 Injection molding Machining processes Quality control Accurate modeling of the metal cutting process is highly required...

...Andrea Sánchez-Valencia; Julien Loste Recent changes in legislation along with environmental initiatives to drive sustainability and reduce carbon emissions have sprouted the development of energy models to characterize manufacturing processes. In the case of injection molding, much work has been...

... Injection molding Modeling and simulation Sensing Monitoring Quality control Diagnostics Multistation assembly is a complex and large-scale manufacturing system that involves numerous parts and multiple stations to assemble the final product. The quality of the final product depends upon many...

.... Manuscript received February 26, 2017; final manuscript received June 30, 2017; published online November 3, 2017. Editor: Y. Lawrence Yao. 26 02 2017 30 06 2017 Injection molding Inspection Modeling and simulation Production systems optimization Polymer fabrication processes...

... by the corresponding projection vector. Performance evaluation using data measured from polymer injection molding confirmed the effectiveness of the developed technique. Manuscript received January 31, 2017; final manuscript received May 19, 2017; published online August 24, 2017. Assoc. Editor: Ivan Selesnick...

..., the work material undergoes a severe plastic deformation due to the intense mechanical and thermal loads. As a result, the mechanical states, the microstructure, and metallographic structure of the machined surface and subsurface will be altered. Injection molding Machining processes Quality...

...), and also, the measurement accuracy is limited to the proficiency level of an operator. It is difficult to online measure and control the volume variation of multiple chambers of a workpiece in machining processes. Injection molding Machining processes Quality control 31 05 2016 26 01...

...; published online March 24, 2017. Assoc. Editor: Donggang Yao. 21 11 2016 14 02 2017 Materials processing Injection molding Polymer fabrication processes Glass fiber reinforced polymer (GFRP) composites have been widely used as laminated structures in automotive, marine...

... observed in the experiments. Manuscript received November 21, 2016; final manuscript received February 14, 2017; published online March 24, 2017. Assoc. Editor: Donggang Yao. 21 11 2016 14 02 2017 1 Corresponding author. Materials processing Injection molding Polymer...