Volume 98 Issue 4 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 98, Issue 4

November 1976

This article was originally published in

Journal of Engineering for Industry

ISSN 0022-0817

Research Papers

Metal Flow in Two-Die Swaging

W. G. Ovens, E. L. Bartholomew, R. R. Biederman

J. Eng. Ind. November 1976, 98(4): 1121–1124. doi: https://doi.org/10.1115/1.3439064

Abstract

View articletitled, Metal Flow in Two-Die Swaging

Open the PDF for in another window

Topics: Cold rolling , Flow (Dynamics) , Fracture (Materials) , Hardening , Metals

Attritious Wear of Silicon Carbide

R. Komanduri, M. C. Shaw

J. Eng. Ind. November 1976, 98(4): 1125–1134. doi: https://doi.org/10.1115/1.3439065

Abstract

View articletitled, Attritious Wear of Silicon Carbide

Open the PDF for in another window

Topics: Silicon , Wear , Metals , Atoms , Carbon , Diffusion (Physics) , Fracture (Materials) , Fracture (Process) , High temperature , Aluminum

Analysis of Flexible Rotor Whirl and Whip Using a Realistic Hydrodynamic Journal Bearing Model

S. T. Myrick, Jr., H. G. Rylander

J. Eng. Ind. November 1976, 98(4): 1135–1143. doi: https://doi.org/10.1115/1.3439066

Abstract

View articletitled, Analysis of Flexible Rotor Whirl and Whip Using a Realistic Hydrodynamic Journal Bearing Model

Open the PDF for in another window

Topics: Journal bearings , Rotors , Whirls , Bearings , Cavitation , Computer simulation , Damping , Disks , Fluid films , Geometry

Dynamic Stability of Timoshenko Beams by Finite Element Method

J. Thomas, B. A. H. Abbas

J. Eng. Ind. November 1976, 98(4): 1145–1149. doi: https://doi.org/10.1115/1.3439069

Abstract

View articletitled, Dynamic Stability of Timoshenko Beams by Finite Element Method

Open the PDF for in another window

Topics: Dynamic stability , Finite element methods , Stress , Rotational inertia , Buckling , Shear deformation , Stiffness , Analytical methods , Finite element model , Inertia (Mechanics)

Application of the Deformation Theory of Plasticity for Determining Elastoplastic Stress and Strain Concentration Factors

J. P. Eimermacher, I.-Chih Wang, M. L. Brown

J. Eng. Ind. November 1976, 98(4): 1152–1156. doi: https://doi.org/10.1115/1.3439072

Abstract

View articletitled, Application of the Deformation Theory of Plasticity for Determining Elastoplastic Stress and Strain Concentration Factors

Open the PDF for in another window

Topics: Deformation , Plasticity , Stress , Constitutive equations , Failure , Finite element analysis , Stiffness , Yield strength

Tubesheet Design in U-Tube Exchangers Including the Effect of Tube Rotational Restraint

A. I. Soler

J. Eng. Ind. November 1976, 98(4): 1157–1160. doi: https://doi.org/10.1115/1.3439073

Abstract

View articletitled, Tubesheet Design in U-Tube Exchangers Including the Effect of Tube Rotational Restraint

Open the PDF for in another window

Topics: Design , Pressure , Heat exchangers , Stiffness

Instabilities of an Asymmetric Rotor With Asymmetric Shaft Mounted on Symmetric Elastic Supports

D. Ardayfio, D. A. Frohrib

J. Eng. Ind. November 1976, 98(4): 1161–1165. doi: https://doi.org/10.1115/1.3439074

Abstract

View articletitled, Instabilities of an Asymmetric Rotor With Asymmetric Shaft Mounted on Symmetric Elastic Supports

Open the PDF for in another window

Topics: Rotors , Inertia (Mechanics) , Stiffness

Failure Analysis of a Redundant Reeving Hoist

A. J. Edmondson

J. Eng. Ind. November 1976, 98(4): 1166–1169. doi: https://doi.org/10.1115/1.3439075

Abstract

View articletitled, Failure Analysis of a Redundant Reeving Hoist

Open the PDF for in another window

Topics: Design , Failure , Failure analysis , Hoists , Ropes , Strategic materials , Stress , Wire

Product Design Implications of New High-Speed Milling Techniques

R. I. King, J. G. McDonald

J. Eng. Ind. November 1976, 98(4): 1170–1175. doi: https://doi.org/10.1115/1.3439076

Abstract

View articletitled, Product Design Implications of New High-Speed Milling Techniques

Open the PDF for in another window

Topics: Milling , Product design , Design , Machine tools , Design engineering , Manufacturing , Stability , Testing

A Singularity Approach to Circular Plates

L. L. Durocher, A. N. Palazotto

J. Eng. Ind. November 1976, 98(4): 1176–1178. doi: https://doi.org/10.1115/1.3439077

Abstract

View articletitled, A Singularity Approach to Circular Plates

Open the PDF for in another window

Topics: Algebra , Computers , Deflection , Plates (structures) , Stress

Criteria for Evaluating Bolt Head Design

R. C. Landt

J. Eng. Ind. November 1976, 98(4): 1179–1182. doi: https://doi.org/10.1115/1.3439078

Abstract

View articletitled, Criteria for Evaluating Bolt Head Design

Open the PDF for in another window

Topics: Design , Failure , Fasteners , Mechanical properties , Weight (Mass)

Methods for Improving the Knuckle Boom Capacity in Truck-Mounted Cranes

B. N. Sridhar

J. Eng. Ind. November 1976, 98(4): 1183–1187. doi: https://doi.org/10.1115/1.3439079

Abstract

View articletitled, Methods for Improving the Knuckle Boom Capacity in Truck-Mounted Cranes

Open the PDF for in another window

Topics: Truck mounted cranes , Linkages , Design , Hardware

Design Analysis of a Snap-Action Mechanism

J. E. Motherway

J. Eng. Ind. November 1976, 98(4): 1188–1191. doi: https://doi.org/10.1115/1.3439080

Abstract

View articletitled, Design Analysis of a Snap-Action Mechanism

Open the PDF for in another window

Topics: Design , Displacement , Friction , Shapes , Springs

The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool

C. R. Liu, M. M. Barash

J. Eng. Ind. November 1976, 98(4): 1192–1199. doi: https://doi.org/10.1115/1.3439081

Abstract

View articletitled, The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool

Open the PDF for in another window

Topics: Cutting , Carbon , Density , Machining , Shear (Mechanics) , Size effect , Steel , Stress concentration , Temperature , Work hardening

The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 2: Cutting With a Tool With Flank Wear

C. R. Liu, M. M. Barash

J. Eng. Ind. November 1976, 98(4): 1202–1208. doi: https://doi.org/10.1115/1.3439085

Abstract

View articletitled, The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 2: Cutting With a Tool With Flank Wear

Open the PDF for in another window

Topics: Cutting , Wear , Temperature effects , Density , Shear (Mechanics) , Stress , Stress concentration , Temperature , Work hardening , Yield strength

An Investigation of Computer Control of Machining Chatter

T. L. Subramanian, M. F. DeVries, S. M. Wu

J. Eng. Ind. November 1976, 98(4): 1209–1213. doi: https://doi.org/10.1115/1.3439086

Abstract

View articletitled, An Investigation of Computer Control of Machining Chatter

Open the PDF for in another window

Topics: Chatter , Computer control , Computers , Modeling , Signals , Stochastic processes , Vibration

Oily Bilge Water Treatment With a Tubular Ultrafiltration System

L. R. Harris, D. F. Jackson, P. Schatzberg

J. Eng. Ind. November 1976, 98(4): 1215–1220. doi: https://doi.org/10.1115/1.3439089

Abstract

View articletitled, Oily Bilge Water Treatment With a Tubular Ultrafiltration System

Open the PDF for in another window

Topics: Detergents , Enzymes , Fluids , Fuel oils , Lubricating oils , Membranes , Navy , Pollution , Pressure , Rivers

Hydrogen-Induced Cracking of Steels Under Wet Hydrogen Sulfide Environment

E. Miyoshi, T. Tanaka, F. Terasaki, A. Ikeda

J. Eng. Ind. November 1976, 98(4): 1221–1230. doi: https://doi.org/10.1115/1.3439090

Abstract

View articletitled, Hydrogen-Induced Cracking of Steels Under Wet Hydrogen Sulfide Environment

Open the PDF for in another window

Topics: Hydrogen , Hydrogen embrittlement , Steel , Sulfur , Fracture (Materials) , Copper , Cracking (Materials) , Fracture (Process) , Low temperature , Particulate matter

An Experimental Investigation of the Dynamic Behavior of the Spatial RSSR Crank and Rocker Mechanism With an Asymmetrical Coupler

W. S. Begg, J. R. Ellis

J. Eng. Ind. November 1976, 98(4): 1231–1236. doi: https://doi.org/10.1115/1.3439091

Abstract

View articletitled, An Experimental Investigation of the Dynamic Behavior of the Spatial RSSR Crank and Rocker Mechanism With an Asymmetrical Coupler

Open the PDF for in another window

Topics: Center of mass , Degrees of freedom , Machinery , Torque

The Application of the Double Ligament Tensile Test in Deformation Processing

R. G. Kumble, J. T. Berry

J. Eng. Ind. November 1976, 98(4): 1237–1242. doi: https://doi.org/10.1115/1.3439092

Abstract

View articletitled, The Application of the Double Ligament Tensile Test in Deformation Processing

Open the PDF for in another window

Topics: Alloys , Carbon , Cross section (Physics) , Deformation , Design , Elongation , Finite element analysis , Forgings (Products) , Geometry , Mechanical properties

The Role of Fracture Mechanics in Design Technology

G. C. Sih

J. Eng. Ind. November 1976, 98(4): 1243–1249. doi: https://doi.org/10.1115/1.3439093

Abstract

View articletitled, The Role of Fracture Mechanics in Design Technology

Open the PDF for in another window

Topics: Design , Fracture mechanics , Fracture (Materials) , Failure , Fracture toughness , Stress , Brittleness , Crack propagation , Density , Elasticity

Approximate Straight-Line Motion From Simple Spatial Mechanisms

M. W. Reid, K. H. Hunt, H. Nolle

J. Eng. Ind. November 1976, 98(4): 1250–1254. doi: https://doi.org/10.1115/1.3439094

Abstract

View articletitled, Approximate Straight-Line Motion From Simple Spatial Mechanisms

Open the PDF for in another window

Topics: Linkages , Particle spin , Rotation , Spin (Aerodynamics)

Velocity Fluctuation in Four-Bar Linkages and Slider-Crank Mechanisms

F. Freudenstein, E. J. F. Primrose, S. Ray, B. Laks

J. Eng. Ind. November 1976, 98(4): 1255–1259. doi: https://doi.org/10.1115/1.3439095

Abstract

View articletitled, Velocity Fluctuation in Four-Bar Linkages and Slider-Crank Mechanisms

Open the PDF for in another window

Topics: Linkages , Fluctuations (Physics) , Optimization , Algebra , Dynamics (Mechanics) , Statics

On Extreme Velocity Ratios in Spherical Four-Link Mechanisms

P. R. Pamidi

J. Eng. Ind. November 1976, 98(4): 1260–1265. doi: https://doi.org/10.1115/1.3439096

Abstract

View articletitled, On Extreme Velocity Ratios in Spherical Four-Link Mechanisms

Open the PDF for in another window

Topics: Algebra , Polynomials

Analytical and Experimental Investigation of Elastic Slider-Crank Mechanisms

E. P. Golebiewski, J. P. Sadler

J. Eng. Ind. November 1976, 98(4): 1266–1271. doi: https://doi.org/10.1115/1.3439097

Abstract

View articletitled, Analytical and Experimental Investigation of Elastic Slider-Crank Mechanisms

Open the PDF for in another window

Topics: Bending (Stress) , Bridges (Structures) , D'Alembert's principle , Damping , Differential equations , Strain gages

Automatic Orientation Control Device for Underwater Divers

A. Baz, A. Seireg

J. Eng. Ind. November 1976, 98(4): 1272–1276. doi: https://doi.org/10.1115/1.3439098

Abstract

View articletitled, Automatic Orientation Control Device for Underwater Divers

Open the PDF for in another window

Topics: Buoyancy , Engineering prototypes , Gravity (Force) , Grinding , Hull , Ships , Welding

Heuristic Combinatorial Optimization in the Kinematic Design of Mechanisms—Part 1: Theory

T. W. Lee, F. Freudenstein

J. Eng. Ind. November 1976, 98(4): 1277–1280. doi: https://doi.org/10.1115/1.3439099

Abstract

View articletitled, Heuristic Combinatorial Optimization in the Kinematic Design of Mechanisms—Part 1: Theory

Open the PDF for in another window

Topics: Design , Kinematics , Optimization

Heuristic Combinatorial Optimization in the Kinematic Design of Mechanisms—Part 2: Applications

T. W. Lee, F. Freudenstein

J. Eng. Ind. November 1976, 98(4): 1281–1284. doi: https://doi.org/10.1115/1.3439100

Abstract

View articletitled, Heuristic Combinatorial Optimization in the Kinematic Design of Mechanisms—Part 2: Applications

Open the PDF for in another window

Topics: Design , Kinematics , Optimization , Algorithms , Printing , Displacement , Errors , Torque , Variable speed drives

On the Criteria for the Rotatability of the Cranks of a Skew Four-Bar Linkage

F. Freudenstein, E. J. F. Primrose

J. Eng. Ind. November 1976, 98(4): 1285–1288. doi: https://doi.org/10.1115/1.3439101

Abstract

View articletitled, On the Criteria for the Rotatability of the Cranks of a Skew Four-Bar Linkage

Open the PDF for in another window

Topics: Linkages , Algebra

Momentum Balancing of Four-Bar Linkages

J. L. Wiederrich, B. Roth

J. Eng. Ind. November 1976, 98(4): 1289–1295. doi: https://doi.org/10.1115/1.3439102

Abstract

View articletitled, Momentum Balancing of Four-Bar Linkages

Open the PDF for in another window

Topics: Linkages , Momentum , Fluctuations (Physics) , Angular momentum , Center of mass , Computers , Design , Vibration

Reduction of the Contact Stress in Internal Gear Pumps

J. R. Colbourne

J. Eng. Ind. November 1976, 98(4): 1296–1300. doi: https://doi.org/10.1115/1.3439103

Abstract

View articletitled, Reduction of the Contact Stress in Internal Gear Pumps

Open the PDF for in another window

Topics: Gear pumps , Stress , Pumps

A Derivation of a Minimal Set of Multilinear Loop Equations for Spatial Mechanisms

P. D. Potts

J. Eng. Ind. November 1976, 98(4): 1301–1305. doi: https://doi.org/10.1115/1.3439104

Abstract

View articletitled, A Derivation of a Minimal Set of Multilinear Loop Equations for Spatial Mechanisms

Open the PDF for in another window

Topics: Linkages , Rotation

A Variational Principle for the Elastodynamic Motion of Planar Linkages

B. S. Thompson, A. D. S. Barr

J. Eng. Ind. November 1976, 98(4): 1306–1312. doi: https://doi.org/10.1115/1.3439105

Abstract

View articletitled, A Variational Principle for the Elastodynamic Motion of Planar Linkages

Open the PDF for in another window

Topics: Linkages , Variational principles , Displacement , Deformation , Equations of motion , Stress

Precision Insertion Control Robot and Its Application

K. Takeyasu, T. Goto, T. Inoyama

J. Eng. Ind. November 1976, 98(4): 1313–1318. doi: https://doi.org/10.1115/1.3439106

Abstract

View articletitled, Precision Insertion Control Robot and Its Application

Open the PDF for in another window

Topics: Robots , Clearances (Engineering) , Computers , Control algorithms , Programmable sequence controllers , Tactile sensors

Mechanical Joints With Clearance: A Three-Mode Model

B. Miedema, W. M. Mansour

J. Eng. Ind. November 1976, 98(4): 1319–1323. doi: https://doi.org/10.1115/1.3439107

Abstract

View articletitled, Mechanical Joints With Clearance: A Three-Mode Model

Open the PDF for in another window

Topics: Clearances (Engineering) , Maintenance , Momentum , Noise (Sound) , Spectra (Spectroscopy)

Mechanism Design Using Animation

H. E. Ladd

J. Eng. Ind. November 1976, 98(4): 1324–1329. doi: https://doi.org/10.1115/1.3439108

Abstract

View articletitled, Mechanism Design Using Animation

Open the PDF for in another window

Topics: Computers , Design

Electromechanical Dynamics of a Four-Link Mechanism Operating in a Magnetic Field

W. D. Smith, W. S. Reed

J. Eng. Ind. November 1976, 98(4): 1330–1334. doi: https://doi.org/10.1115/1.3439110

Abstract

View articletitled, Electromechanical Dynamics of a Four-Link Mechanism Operating in a Magnetic Field

Open the PDF for in another window

Topics: Dynamics (Mechanics) , Magnetic fields , Design , Equations of motion , Flow (Dynamics) , Linkages , Torque

Technology Transfer in the Vibration Analysis of Linearly Tapered Cantilever Beams

H. H. Mabie, C. B. Rogers

J. Eng. Ind. November 1976, 98(4): 1335–1341. doi: https://doi.org/10.1115/1.3439111

Abstract

View articletitled, Technology Transfer in the Vibration Analysis of Linearly Tapered Cantilever Beams

Open the PDF for in another window

Topics: Cantilever beams , Vibration analysis , Acoustics , Design

Synthesis of a Spherical Cycloidal Mechanism

R. Mayo, A. H. Soni

J. Eng. Ind. November 1976, 98(4): 1342–1346. doi: https://doi.org/10.1115/1.3439112

Abstract

View articletitled, Synthesis of a Spherical Cycloidal Mechanism

Open the PDF for in another window

Topics: Displacement , Linkages , Rotation

Identification of Structures Through Records Obtained During Strong Earthquake Ground Motion

F. E. Udwadia, P. C. Shah

J. Eng. Ind. November 1976, 98(4): 1347–1362. doi: https://doi.org/10.1115/1.3439113

Abstract

View articletitled, Identification of Structures Through Records Obtained During Strong Earthquake Ground Motion

Open the PDF for in another window

Topics: Earthquakes , Algorithms , Differential equations , Excitation , Optimal control , Shear (Mechanics) , Stiffness

Discussions

Discussion: “Analysis of Flexible Rotor Whirl and Whip Using a Realistic Hydrodynamic Journal Bearing Model” (Myrick, Jr., S. T., and Rylander, H. G., 1976, ASME J. Eng. Ind., 98, pp. 1135–1143)

J. M. Vance

J. Eng. Ind. November 1976, 98(4): 1143. doi: https://doi.org/10.1115/1.3439067

View articletitled, Discussion: “Analysis of Flexible Rotor Whirl and Whip Using a Realistic Hydrodynamic Journal Bearing Model” (Myrick, Jr., S. T., and Rylander, H. G., 1976, ASME J. Eng. Ind., 98, pp. 1135–1143)

Open the PDF for in another window

Topics: Journal bearings , Rotors , Whirls

Closure to “Discussion of ‘Analysis of Flexible Rotor Whirl and Whip Using a Realistic Hydrodynamic Journal Bearing Model’” (1976, ASME J. Eng. Ind., 98, p. 1143)

S. T. Myrick, Jr., H. G. Rylander

J. Eng. Ind. November 1976, 98(4): 1144. doi: https://doi.org/10.1115/1.3439068

View articletitled, Closure to “Discussion of ‘Analysis of Flexible Rotor Whirl and Whip Using a Realistic Hydrodynamic Journal Bearing Model’” (1976, ASME J. Eng. Ind., 98, p. 1143)

Open the PDF for in another window

Topics: Journal bearings , Rotors , Whirls

Discussion: “Dynamic Stability of Timoshenko Beams by Finite Element Method” (Thomas, J., and Abbas, B. A. H., 1976, ASME J. Eng. Ind., 98, pp. 1145–1149)

C. V. Smith, Jr.

J. Eng. Ind. November 1976, 98(4): 1149–1150. doi: https://doi.org/10.1115/1.3439070

View articletitled, Discussion: “Dynamic Stability of Timoshenko Beams by Finite Element Method” (Thomas, J., and Abbas, B. A. H., 1976, ASME J. Eng. Ind., 98, pp. 1145–1149)

Open the PDF for in another window

Topics: Dynamic stability , Finite element methods

Closure to “Discussion of ‘Dynamic Stability of Timoshenko Beams by Finite Element Method’” (1976, ASME J. Eng. Ind., 98, pp. 1149–1150)

J. Thomas, B. A. H. Abbas

J. Eng. Ind. November 1976, 98(4): 1150–1151. doi: https://doi.org/10.1115/1.3439071

View articletitled, Closure to “Discussion of ‘Dynamic Stability of Timoshenko Beams by Finite Element Method’” (1976, ASME J. Eng. Ind., 98, pp. 1149–1150)

Open the PDF for in another window

Topics: Dynamic stability , Finite element analysis

Discussion: “The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool” (Liu, C. R., and Barash, M. M., 1976, ASME J. Eng. Ind., 98, pp. 1192–1199)

J. A. Bailey

J. Eng. Ind. November 1976, 98(4): 1199. doi: https://doi.org/10.1115/1.3439082

View articletitled, Discussion: “The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool” (Liu, C. R., and Barash, M. M., 1976, ASME J. Eng. Ind., 98, pp. 1192–1199)

Open the PDF for in another window

Topics: Cutting

Discussion: “The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool” (Liu, C. R., and Barash, M. M., 1976, ASME J. Eng. Ind., 98, pp. 1192–1199)

M. Field

J. Eng. Ind. November 1976, 98(4): 1199–1200. doi: https://doi.org/10.1115/1.3439083

Open the PDF for in another window

Topics: Cutting

Closure to “Discussions of ‘The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool’” (1976, ASME J. Eng. Ind., 98, pp. 1199–1200)

C. R. Liu, M. M. Barash

J. Eng. Ind. November 1976, 98(4): 1200–1201. doi: https://doi.org/10.1115/1.3439084

View articletitled, Closure to “Discussions of ‘The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool’” (1976, ASME J. Eng. Ind., 98, pp. 1199–1200)

Open the PDF for in another window

Topics: Cutting

Discussion: “An Investigation of Computer Control of Machining Chatter” (Subramanian, T. L., DeVries, M. F., and Wu, S. M., 1976, ASME J. Eng. Ind., 98, pp. 1209–1213)

B. C. Cuppan

J. Eng. Ind. November 1976, 98(4): 1213–1214. doi: https://doi.org/10.1115/1.3439087

View articletitled, Discussion: “An Investigation of Computer Control of Machining Chatter” (Subramanian, T. L., DeVries, M. F., and Wu, S. M., 1976, ASME J. Eng. Ind., 98, pp. 1209–1213)

Open the PDF for in another window

Topics: Chatter , Computer control

Closure to “Discussion of ‘An Investigation of Computer Control of Machining Chatter’” (1976, ASME J. Eng. Ind., 98, pp. 1213–1214)

T. L. Subramanian, M. F. DeVries, S. M. Wu

J. Eng. Ind. November 1976, 98(4): 1214. doi: https://doi.org/10.1115/1.3439088

View articletitled, Closure to “Discussion of ‘An Investigation of Computer Control of Machining Chatter’” (1976, ASME J. Eng. Ind., 98, pp. 1213–1214)

Open the PDF for in another window

Topics: Computer control , Machining

Discussion: “The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods” (Story, J. M., Avitzur, B., and Hahn, Jr., W. C., 1976, ASME J. Eng. Ind., 98, pp. 909–913)

R. A. Kohser

J. Eng. Ind. November 1976, 98(4): 1375. doi: https://doi.org/10.1115/1.3439118

View articletitled, Discussion: “The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods” (Story, J. M., Avitzur, B., and Hahn, Jr., W. C., 1976, ASME J. Eng. Ind., 98, pp. 909–913)

Open the PDF for in another window

Topics: Extruding , Flow (Dynamics) , Hydrostatics , Pressure , Rods

Discussion: “The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods” (Story, J. M., Avitzur, B., and Hahn, Jr., W. C., 1976, ASME J. Eng. Ind., 98, pp. 909–913)

J. M. Alexander

J. Eng. Ind. November 1976, 98(4): 1375. doi: https://doi.org/10.1115/1.3439119

Open the PDF for in another window

Topics: Extruding , Flow (Dynamics) , Hydrostatics , Pressure , Rods

Discussion: “The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods” (Story, J. M., Avitzur, B., and Hahn, Jr., W. C., 1976, ASME J. Eng. Ind., 98, pp. 909–913)

A. R. Bobrowsky

J. Eng. Ind. November 1976, 98(4): 1375–1376. doi: https://doi.org/10.1115/1.3439120

Open the PDF for in another window

Topics: Extruding , Flow (Dynamics) , Hydrostatics , Pressure , Rods

Errata

Erratum: “A Note on Blade Loss Dynamics of Rotor-Bearing Systems” (Journal of Engineering for Industry, 1976, 98, pp. 497–504)

R. G. Kirk, D. H. Hibner

J. Eng. Ind. November 1976, 98(4): 1329. doi: https://doi.org/10.1115/1.3439109

View articletitled, Erratum: “A Note on Blade Loss Dynamics of Rotor-Bearing Systems” (Journal of Engineering for Industry, 1976, 98, pp. 497–504)

Open the PDF for in another window

Topics: Bearings , Blades , Dynamics (Mechanics) , Rotors

Technical Briefs

On Bidirectionally Snapping Linkages

G. A. Fazekas

J. Eng. Ind. November 1976, 98(4): 1363–1366. doi: https://doi.org/10.1115/1.3439114

Abstract

View articletitled, On Bidirectionally Snapping Linkages

Open the PDF for in another window

Topics: Linkages , Buckling , Design

A Note on Slip in V-Belt Drives

G. Gerbert

J. Eng. Ind. November 1976, 98(4): 1366–1368. doi: https://doi.org/10.1115/1.3439115

View articletitled, A Note on Slip in V-Belt Drives

Open the PDF for in another window

Topics: V-belts

Theoretical Thermoelastic Consideration on Accuracy in Machining Metals

Y. Takeuti, S. Zaima, N. Noda

J. Eng. Ind. November 1976, 98(4): 1368–1370. doi: https://doi.org/10.1115/1.3439116

View articletitled, Theoretical Thermoelastic Consideration on Accuracy in Machining Metals

Open the PDF for in another window

Topics: Machining , Metals , Thermoelasticity

Prediction of Cylinder Flow Pressures in Mass-Flow Bins Using Minimum Strain Energy

A. G. McLean, P. C. Arnold

J. Eng. Ind. November 1976, 98(4): 1370–1374. doi: https://doi.org/10.1115/1.3439117

Abstract

View articletitled, Prediction of Cylinder Flow Pressures in Mass-Flow Bins Using Minimum Strain Energy

Open the PDF for in another window

Topics: Cylinders , Flow (Dynamics) , Pressure , Approximation , Circular cylinders , Design , Geometry

Issues

Research Papers

Discussions

Errata

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only