Skip Nav Destination
Issues
August 1976
This article was originally published in
Journal of Engineering for Industry
ISSN 0022-0817
In this Issue
Research Papers
Regenerative Drive for Subway Trains—Part 1: Mechanical Accumulator Design
J. Eng. Ind. August 1976, 98(3): 737–743.
doi: https://doi.org/10.1115/1.3439020
Topics:
Design
,
Secondary cells
,
Subways
,
Trains
,
Vehicles
,
Bearings
,
Flywheels
,
Modeling
,
Power density
,
Propulsion
Regenerative Drive for Subway Trains—Part 2: Overall System Model
J. Eng. Ind. August 1976, 98(3): 744–750.
doi: https://doi.org/10.1115/1.3439021
Topics:
Brakes
,
Construction
,
Curbs (Roads)
,
Cycles
,
Electric propulsion
,
Engineering drawings
,
Flow (Dynamics)
,
Industrial design
,
Railroad engineering
,
Rotors
Regenerative Drive for Subway Trains—Part 3: System Evaluation
J. Eng. Ind. August 1976, 98(3): 751–755.
doi: https://doi.org/10.1115/1.3439022
Topics:
Cycles
,
Secondary cells
,
Shorelines
,
Stress
,
Subways
,
Trains
,
Vehicles
Regenerative Drive for Subway Trains—Part 4: Overall System Performance
J. Eng. Ind. August 1976, 98(3): 756–760.
doi: https://doi.org/10.1115/1.3439023
Topics:
Subways
,
Trains
,
Vehicles
,
Computer simulation
,
Energy consumption
,
Shorelines
,
Stress
,
Weight (Mass)
The Future of Safety and Health: A Challenge to Engineering Managers
J. Eng. Ind. August 1976, 98(3): 761–765.
doi: https://doi.org/10.1115/1.3439024
Topics:
Design
,
Engineering design
,
Engineers
,
Health and safety
,
Safety
A Comprehensive Study of the Fixed Edge Bending Moments of Thin Rectangular Cantilever Plates Under Point Loading
J. Eng. Ind. August 1976, 98(3): 766–772.
doi: https://doi.org/10.1115/1.3439025
Topics:
Cantilevers
,
Plates (structures)
,
Cantilever beams
,
Deflection
,
Stress
Eccentric Limit Load on Fasteners
J. Eng. Ind. August 1976, 98(3): 773–775.
doi: https://doi.org/10.1115/1.3439026
Topics:
Fasteners
,
Stress
,
Friction
,
Poles (Building)
,
Yield strength
On Eccentrically Loaded Fasteners
J. Eng. Ind. August 1976, 98(3): 776–778.
doi: https://doi.org/10.1115/1.3439027
Topics:
Fasteners
,
Geometry
,
Optimization
,
Poles (Building)
,
Stress
On Optimal Bolt Preload
J. Eng. Ind. August 1976, 98(3): 779–782.
doi: https://doi.org/10.1115/1.3439028
Topics:
Bolted joints
,
Flanges
,
Tension
On Reciprocating Toroidal Seals
J. Eng. Ind. August 1976, 98(3): 783–787.
doi: https://doi.org/10.1115/1.3439029
Topics:
Boundary-value problems
,
Leakage
,
Pressure
,
Shapes
Analytical and Experimental Investigation of a High-Speed Elastic-Membered Linkage
J. Eng. Ind. August 1976, 98(3): 788–794.
doi: https://doi.org/10.1115/1.3439030
Topics:
Linkages
,
Deflection
,
Equations of motion
An Experimental Investigation of Stick-Slip in Hydrostatic Extrusion Using Wax to Simulate Metals
J. Eng. Ind. August 1976, 98(3): 795–799.
doi: https://doi.org/10.1115/1.3439031
Topics:
Extruding
,
Hydrostatics
,
Metals
,
Stick-slip
,
Pressure
,
Fluctuations (Physics)
,
Fluid film lubrication
,
Fluids
Workability of Aluminum Alloy 7075-T6 in Upsetting and Rolling
J. Eng. Ind. August 1976, 98(3): 800–806.
doi: https://doi.org/10.1115/1.3439032
Topics:
Aluminum alloys
,
Workability
,
Fracture (Materials)
,
Fracture (Process)
,
Dimensions
,
Friction
,
Plane strain
,
Temperature
,
Tension
Computer Design of a Minimum Vibration Face Milling Cutter Using an Improved Cutting Force Model
J. Eng. Ind. August 1976, 98(3): 807–810.
doi: https://doi.org/10.1115/1.3439033
Epicyclic Gear Vibrations
J. Eng. Ind. August 1976, 98(3): 811–815.
doi: https://doi.org/10.1115/1.3439034
Topics:
Planetary gears
,
Vibration
,
Rotation
,
Gear teeth
,
Springs
,
Stiffness
A Generalized Return Vector for Projection Methods in Optimization With Nonlinear Constraints
J. Eng. Ind. August 1976, 98(3): 816–819.
doi: https://doi.org/10.1115/1.3439035
Topics:
Optimization
Forced Vibrations of Viscoelastic Timoshenko Beams
J. Eng. Ind. August 1976, 98(3): 820–826.
doi: https://doi.org/10.1115/1.3439036
Modal Truncation of Substructures Used in Free Vibration Analysis
J. Eng. Ind. August 1976, 98(3): 827–834.
doi: https://doi.org/10.1115/1.3439037
Topics:
Cantilever beams
,
Eigenvalues
,
Errors
,
Free vibrations
,
Structural dynamics
Mechanical Separation Phenomena in Picking Mechanisms of Fly-Shuttle Looms
J. Eng. Ind. August 1976, 98(3): 835–839.
doi: https://doi.org/10.1115/1.3439038
Topics:
Looms
,
Separation (Technology)
,
Damping
,
Dynamic response
,
Emissions
,
Excitation
,
Noise (Sound)
,
Springs
,
Stiffness
,
Vibration
Spinning Frame Noise Sources
J. Eng. Ind. August 1976, 98(3): 840–844.
doi: https://doi.org/10.1115/1.3439039
Topics:
Noise (Sound)
,
Spin (Aerodynamics)
,
Spinning (Textile)
,
Machinery
,
Noise control
,
Cylinders
,
Gears
,
Pulleys
,
Textiles
,
Vacuum equipment
Instrumental Procedures for Analysis of Nonlint Particles in Cotton
J. Eng. Ind. August 1976, 98(3): 845–848.
doi: https://doi.org/10.1115/1.3439040
Topics:
Particulate matter
,
Instrumentation
Development of Design Charts for Bolts Preloaded up to the Plastic Range
J. Eng. Ind. August 1976, 98(3): 849–851.
doi: https://doi.org/10.1115/1.3439041
Topics:
Design
On the Theory of the Calculation of the Constant Velocity Ball Transmission Joints
J. Eng. Ind. August 1976, 98(3): 852–857.
doi: https://doi.org/10.1115/1.3439042
Determination of Joint Stiffness in Bolted Connections
J. Eng. Ind. August 1976, 98(3): 858–861.
doi: https://doi.org/10.1115/1.3439043
Topics:
Stiffness
Machine Life Expectation
J. Eng. Ind. August 1976, 98(3): 862–867.
doi: https://doi.org/10.1115/1.3439044
Topics:
Machinery
Dynamic Properties of a Moving Thread Line
J. Eng. Ind. August 1976, 98(3): 868–875.
doi: https://doi.org/10.1115/1.3439045
A Modal Transient Rotordynamic Model for Dual-Rotor Jet Engine Systems
J. Eng. Ind. August 1976, 98(3): 876–882.
doi: https://doi.org/10.1115/1.3439046
Topics:
Jet engines
,
Rotors
,
Transients (Dynamics)
,
Damping
,
Bearings
,
Simulation models
,
Blades
,
Dampers
,
Simulation
,
Structural dynamics
Some Aspects of Computer Numerical Control With Reference to Interpolation
J. Eng. Ind. August 1976, 98(3): 883–889.
doi: https://doi.org/10.1115/1.3439047
Topics:
Computers
,
Interpolation
Application of MOIRE Technique to the Determination of Stresses on the Rake Surface of Single Point Cutting Tool Models
J. Eng. Ind. August 1976, 98(3): 890–894.
doi: https://doi.org/10.1115/1.3439048
Topics:
Cutting tools
,
Stress
Vibration Damping Characteristics of Multilayered Beams With Constrained Viscoelastic Layers
J. Eng. Ind. August 1976, 98(3): 895–901.
doi: https://doi.org/10.1115/1.3439049
Topics:
Damping
,
Vibration
,
Stiffness
,
Weight (Mass)
,
Displacement
,
Simply supported beams
A Simplified Technique for Prediction of Collapse Modes in Crash-Impacted Structural Systems
J. Eng. Ind. August 1976, 98(3): 902–908.
doi: https://doi.org/10.1115/1.3439050
Topics:
Collapse
,
Crashworthiness
,
Design
,
Energy management
,
Linear systems
,
Shock (Mechanics)
The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods
J. Eng. Ind. August 1976, 98(3): 909–913.
doi: https://doi.org/10.1115/1.3439051
Topics:
Extruding
,
Flow (Dynamics)
,
Hydrostatics
,
Pressure
,
Rods
,
Aluminum
,
Alloys
,
Atmospheric pressure
,
Bond strength
,
Bonding
Semiactive Control of Multimode Vibratory Systems Using the ILSM Concept
J. Eng. Ind. August 1976, 98(3): 914–918.
doi: https://doi.org/10.1115/1.3439052
Topics:
Computer simulation
,
Dampers
,
Excitation
,
Generators
,
Noise (Sound)
,
Signals
Dynamic Acceptance Tests for Horizontal Milling Machines Based on a Statistical Theory of Machine Tool Chatter
J. Eng. Ind. August 1976, 98(3): 919–929.
doi: https://doi.org/10.1115/1.3439053
Topics:
Chatter
,
Machine tools
,
Milling machines
,
Machinery
,
Electromagnetic scattering
,
Cutting
,
Stability
A General Method for Simulating the Flow Dependent Nonlinear Vibrations of Compressor Reed Valves
J. Eng. Ind. August 1976, 98(3): 930–934.
doi: https://doi.org/10.1115/1.3439054
Topics:
Compressors
,
Flow (Dynamics)
,
Valves
,
Vibration
,
Differential equations
,
Oscillations
,
Plates (structures)
,
Refrigeration
Dynamics of a Drifting Buoy-Cable-Array Assembly Used in Submarine Detection
J. Eng. Ind. August 1976, 98(3): 935–940.
doi: https://doi.org/10.1115/1.3439055
Topics:
Buoys
,
Cables
,
Dynamics (Mechanics)
,
Manufacturing
,
Underwater vehicles
,
Steady state
,
Eigenvalues
Axisymmetrical Vibrations of Underwater Hemispherical Shells
J. Eng. Ind. August 1976, 98(3): 941–947.
doi: https://doi.org/10.1115/1.3439056
Topics:
Boundary-value problems
,
Differential equations
,
Fluids
,
Free vibrations
,
Mode shapes
,
Pressure
,
Shapes
,
Shells
,
Spherical shells
,
Thin shells
Guide Vane Vibrations Caused by Wakes and Blower Noise—Part 1: The Vortex Degeneration in the Asymmetrical Wakes
J. Eng. Ind. August 1976, 98(3): 948–955.
doi: https://doi.org/10.1115/1.3439057
Topics:
Guide vanes
,
Noise (Sound)
,
Vibration
,
Vortices
,
Wakes
,
Vortex street
,
Flat plates
,
Blades
,
Cascades (Fluid dynamics)
,
Locks (Waterways)
Guide Vane Vibrations Caused by Wakes and Blower Noise—Part 2: Transferability From the Model to the Prototype
J. Eng. Ind. August 1976, 98(3): 956–964.
doi: https://doi.org/10.1115/1.3439058
Topics:
Engineering prototypes
,
Guide vanes
,
Noise (Sound)
,
Vibration
,
Wakes
,
Resonance
,
Acoustics
,
Blades
,
Damping
,
Loudspeakers
Effect of Sweep and Drag on Hydrofoil Stability
J. Eng. Ind. August 1976, 98(3): 965–967.
doi: https://doi.org/10.1115/1.3439059
Transient Torsional Vibration of Steam Turbine and Generator Shafts due to High Speed Reclosing of Electric Power Lines
J. Eng. Ind. August 1976, 98(3): 968–979.
doi: https://doi.org/10.1115/1.3439060
Topics:
Electricity (Physics)
,
Generators
,
Steam turbines
,
Transients (Dynamics)
,
Vibration
,
Torque
,
Approximation
,
Computers
,
Damping
,
Machinery
Predicting Natural Frequencies of a Hydrodynamically Lubricated Journal Bearing With Constant Oil Supply Pressure
J. Eng. Ind. August 1976, 98(3): 980–987.
doi: https://doi.org/10.1115/1.3439061
Topics:
Journal bearings
,
Pressure
,
Bearings
,
Stress
,
Equations of motion
Experimental Evaluation of Multiplane-Multispeed Rotor Balancing Through Multiple Critical Speeds
J. Eng. Ind. August 1976, 98(3): 988–998.
doi: https://doi.org/10.1115/1.3439062
Surface Integrity in Machining AISI 4340 Steel
J. Eng. Ind. August 1976, 98(3): 999–1006.
doi: https://doi.org/10.1115/1.3439063
Topics:
Machining
,
Steel
,
Cutting
,
Damage
,
Scanning electron microscopy
,
Temperature
,
Wear
,
Cutting tools
,
Microhardness
,
Microprobe analysis
Vibration Analysis of Axial Flow Turbine Disks Using Finite Elements
J. Eng. Ind. August 1976, 98(3): 1008–1013.
doi: https://doi.org/10.1115/1.3438992
Nonlinear Stresses and Deflections of Beams Subjected to Random Time Dependent Uniform Pressure
J. Eng. Ind. August 1976, 98(3): 1014–1020.
doi: https://doi.org/10.1115/1.3438993
Topics:
Deflection
,
Pressure
,
Stress
,
Displacement
,
Excitation
,
White noise
Optimal Design of a Class of Welded Structures Using Geometric Programming
J. Eng. Ind. August 1976, 98(3): 1021–1025.
doi: https://doi.org/10.1115/1.3438995
Topics:
Computer programming
,
Design
,
Engineering design
Efficient Optimal Design of Suspension Systems for Rotating Shafts
J. Eng. Ind. August 1976, 98(3): 1026–1029.
doi: https://doi.org/10.1115/1.3438996
Topics:
Design
,
Suspension systems
,
Errors
,
Performance characterization
,
Rotors
A Linear Programming Approach for Balancing Flexible Rotors
J. Eng. Ind. August 1976, 98(3): 1030–1035.
doi: https://doi.org/10.1115/1.3438997
Topics:
Linear programming
,
Rotors
,
Computers
,
Rotor balancing
A Survey of Optimization Methods Applied to the Design of Mechanisms
J. Eng. Ind. August 1976, 98(3): 1036–1041.
doi: https://doi.org/10.1115/1.3438999
Topics:
Design
,
Optimization
Optimum Design of Automatic Depth Control System for Underwater Divers
J. Eng. Ind. August 1976, 98(3): 1042–1047.
doi: https://doi.org/10.1115/1.3439000
Topics:
Control systems
,
Design
,
Buoyancy
,
Control panels
,
Pneumatic control
,
Pressure
,
Pressure transducers
,
Signals
,
Solenoids
,
Stability
Parameter Optimization of the Steel Grinding Process
J. Eng. Ind. August 1976, 98(3): 1048–1052.
doi: https://doi.org/10.1115/1.3439002
Topics:
Grinding
,
Optimization
,
Steel
,
Grinding wheels
,
Machining
,
Nonlinear programming
,
Surface quality
,
Tradeoffs
,
Wear
Suppression of Rotor-Bearing System Vibrations Through Flexible Bearing Support Damping
J. Eng. Ind. August 1976, 98(3): 1053–1061.
doi: https://doi.org/10.1115/1.3439003
Topics:
Bearings
,
Damping
,
Rotors
,
Vibration
,
Dampers
,
Random vibration
,
Journal bearings
,
Machinery
,
Turbogenerators
,
Bending (Stress)
Prediction of Failure in Ductile Machine Elements Operating at Elevated Temperatures
J. Eng. Ind. August 1976, 98(3): 1062–1065.
doi: https://doi.org/10.1115/1.3439005
Topics:
Failure
,
Machine components
,
Temperature
,
Design
,
Engineering design processes
,
Mechanical properties
,
Metals
,
Steel
,
Stress
Optimum Reliability at Minimum Cost
J. Eng. Ind. August 1976, 98(3): 1066–1068.
doi: https://doi.org/10.1115/1.3439007
Topics:
Reliability
,
Failure
,
Optimization
,
Service life (Equipment)
Design Problem Solving by Functional Analysis and Creativity
J. Eng. Ind. August 1976, 98(3): 1069–1073.
doi: https://doi.org/10.1115/1.3439008
Topics:
Creativity
,
Design
,
Functional analysis
,
Hardware
,
Failure
,
Innovation
The Failure-Experience Matrix—A Useful Design Tool
J. Eng. Ind. August 1976, 98(3): 1074–1079.
doi: https://doi.org/10.1115/1.3439009
Topics:
Design
,
Failure
,
Army
,
Corrective actions
,
Failure mechanisms
,
Helicopters
On The Use of The Extreme Value Distribution in Reliability Analysis and Design
J. Eng. Ind. August 1976, 98(3): 1080–1085.
doi: https://doi.org/10.1115/1.3439011
Topics:
Design
,
Event history analysis
,
Reliability
,
Algorithms
,
Design engineering
,
Engineers
,
Risk
The Interaction of Collinear Arrays of Griffith Cracks on Two Radial Lines
J. Eng. Ind. August 1976, 98(3): 1086–1091.
doi: https://doi.org/10.1115/1.3439012
Topics:
Fracture (Materials)
,
Fracture mechanics
,
Geometry
,
Integral equations
,
Polynomials
,
Stress
,
Weight (Mass)
Multiple Internal Resonance in a Structure-Liquid System
J. Eng. Ind. August 1976, 98(3): 1092–1098.
doi: https://doi.org/10.1115/1.3439013
Physical Interpretations of the Instabilities Encountered in the Deflection Equations of the Unconstrained Pipeline
J. Eng. Ind. August 1976, 98(3): 1099–1102.
doi: https://doi.org/10.1115/1.3439015
Topics:
Deflection
,
Pipelines
,
Seabed
,
Tension
,
Weight (Mass)
,
Stiffness
,
Differential equations
,
Pipeline construction
,
Pipes
Strength, Permeabilities, and Porosity of Oilwell Foam Cement
J. Eng. Ind. August 1976, 98(3): 1103–1106.
doi: https://doi.org/10.1115/1.3439016
Topics:
Cements (Adhesives)
,
Permeability
,
Porosity
Maximum Moment Capability of Pipe With Various D/T Ratios
J. Eng. Ind. August 1976, 98(3): 1107–1111.
doi: https://doi.org/10.1115/1.3439017
Topics:
Pipes
Casing Collapse Performance
J. Eng. Ind. August 1976, 98(3): 1112–1119.
doi: https://doi.org/10.1115/1.3439018
Topics:
Collapse
,
Quenching (Metalworking)
,
Testing
,
Manufacturing
,
Oil well casings
,
Quality control
,
Residual stresses
Discussions
Closure to “Discussions of ‘Surface Integrity in Machining AISI 4340 Steel’” (1976, ASME J. Eng. Ind., 98, pp. 1006–1007)
J. Eng. Ind. August 1976, 98(3): 1007.
doi: https://doi.org/10.1115/1.3438991
Topics:
Machining