Skip Nav Destination
Issues
June 2007
ISSN 1087-1357
EISSN 1528-8935
In this Issue
Technical Papers
Model-Based Analysis of the Surface Generation in Microendmilling—Part I: Model Development
J. Manuf. Sci. Eng. June 2007, 129(3): 453–460.
doi: https://doi.org/10.1115/1.2716705
Topics:
Cutting
,
Geometry
,
Model development
,
Surface roughness
,
Vibration
,
Algorithms
,
Kinematics
Model-Based Analysis of the Surface Generation in Microendmilling—Part II: Experimental Validation and Analysis
J. Manuf. Sci. Eng. June 2007, 129(3): 461–469.
doi: https://doi.org/10.1115/1.2716706
Topics:
Surface roughness
,
Model validation
Modeling of the Size Effects on the Behavior of Metals in Microscale Deformation Processes
J. Manuf. Sci. Eng. June 2007, 129(3): 470–476.
doi: https://doi.org/10.1115/1.2714582
Topics:
Crystals
,
Deformation
,
Flow (Dynamics)
,
Grain size
,
Metals
,
Microscale devices
,
Modeling
,
Plasticity
,
Sheet metal
,
Size effect
Modeling Cutting: Plastic Deformation of Polymer Samples Indented With a Wedge
J. Manuf. Sci. Eng. June 2007, 129(3): 477–484.
doi: https://doi.org/10.1115/1.2716716
Topics:
Cutting
,
Deformation
,
Stress
,
Wedges
,
Polymers
,
Modeling
,
Fracture (Materials)
,
Displacement
Response of Thin Films and Substrate to Micro-Scale Laser Shock Peening
J. Manuf. Sci. Eng. June 2007, 129(3): 485–496.
doi: https://doi.org/10.1115/1.2714568
Topics:
Grain size
,
Laser hardening
,
Shock (Mechanics)
,
Silicon
,
Simulation
,
Thin films
,
X-ray diffraction
,
X-rays
,
Electron backscatter diffraction
,
Crystals
Ultrasonic Cavitation Based Nanomanufacturing of Bulk Aluminum Matrix Nanocomposites
J. Manuf. Sci. Eng. June 2007, 129(3): 497–501.
doi: https://doi.org/10.1115/1.2714583
Lapping of Electrical Discharge Machining Processed Tool Steel Surface Using Elliptical Tool Motion
J. Manuf. Sci. Eng. June 2007, 129(3): 502–512.
doi: https://doi.org/10.1115/1.2714584
Topics:
Grinding
Predictive Modeling of Flank Wear in Turning Under Flood Cooling
J. Manuf. Sci. Eng. June 2007, 129(3): 513–519.
doi: https://doi.org/10.1115/1.2714589
Investigation to Study the Applicability of Solid Lubricant in Turning AISI 1040 steel
J. Manuf. Sci. Eng. June 2007, 129(3): 520–526.
doi: https://doi.org/10.1115/1.2716743
Topics:
Lubricants
,
Machining
,
Steel
,
Finishes
,
Surface roughness
,
Cutting
,
Turning
,
Engines
,
Motors
Modeling and Prediction of Cutting Noise in the Face-Milling Process
J. Manuf. Sci. Eng. June 2007, 129(3): 527–530.
doi: https://doi.org/10.1115/1.2716702
Topics:
Cutting
,
Milling
,
Noise (Sound)
,
Vibration
,
Sound pressure
,
Geometry
,
Aerodynamic noise
Thermo-Mechanical Finite Element Modeling of the Friction Drilling Process
J. Manuf. Sci. Eng. June 2007, 129(3): 531–538.
doi: https://doi.org/10.1115/1.2716719
Topics:
Drilling
,
Finite element methods
,
Finite element model
,
Friction
,
Modeling
,
Temperature
,
Torque
,
Deformation
,
Thrust
,
Thermomechanics
A Time Domain Dynamic Simulation Model for Stability Prediction of Infeed Centerless Grinding Processes
J. Manuf. Sci. Eng. June 2007, 129(3): 539–550.
doi: https://doi.org/10.1115/1.2716729
Topics:
Blades
,
Chatter
,
Deformation
,
Grinding
,
Grinding wheels
,
Wheels
,
Simulation models
Reconfigurable Pin-Type Tooling: A Survey of Prior Art and Reduction to Practice
J. Manuf. Sci. Eng. June 2007, 129(3): 551–565.
doi: https://doi.org/10.1115/1.2714577
Topics:
Manufacturing
,
Patents
,
Pins (Engineering)
,
Tooling
,
Shapes
Virtual Clay: An Enhanced Marching Cubes Algorithm for In-Process Geometry Modeling
J. Manuf. Sci. Eng. June 2007, 129(3): 566–574.
doi: https://doi.org/10.1115/1.2716703
Topics:
Algorithms
,
Geometry
,
Polishing equipment
,
Simulation
,
Computers
,
Collisions (Physics)
Three-Dimensional Modeling of Laser Sintering of a Two-Component Metal Powder Layer on Top of Sintered Layers
J. Manuf. Sci. Eng. June 2007, 129(3): 575–582.
doi: https://doi.org/10.1115/1.2716714
Topics:
Laser beams
,
Lasers
,
Melting
,
Metal powders
,
Shrinkage (Materials)
,
Sintering
,
Temperature
Laser Direct-Part Marking of Data Matrix Symbols on Carbon Steel Substrates
J. Manuf. Sci. Eng. June 2007, 129(3): 583–591.
doi: https://doi.org/10.1115/1.2716704
Topics:
Lasers
,
Carbon steel
The Effect of Nonconventional Laser Beam Geometries on Stress Distribution and Distortions in Laser Bending of Tubes
J. Manuf. Sci. Eng. June 2007, 129(3): 592–600.
doi: https://doi.org/10.1115/1.2716715
Topics:
Finite element analysis
,
Laser beams
,
Lasers
,
Shapes
,
Stress concentration
,
Temperature
,
Tube bending
,
Geometry
,
Modeling
,
Stress
Surface Modification and Fatigue Behavior of High-Pressure Oil Jet-Peened Medium Carbon Steel, AISI 1040
J. Manuf. Sci. Eng. June 2007, 129(3): 601–606.
doi: https://doi.org/10.1115/1.2673626
Topics:
Carbon steel
,
Fatigue
,
Shot peening
,
Stress
,
Steel
,
High pressure (Physics)
,
Pressure
,
Cantilevers
,
Residual stresses
Finite Element Simulation of Magnesium Extrusion to Manufacture a Cross-Shaped Profile
J. Manuf. Sci. Eng. June 2007, 129(3): 607–614.
doi: https://doi.org/10.1115/1.2714590
Topics:
Extruding
,
Simulation
,
Temperature
,
Magnesium (Metal)
,
Finite element analysis
,
Deformation
Variation Simulation of Sheet Metal Assemblies Using the Method of Influence Coefficients With Contact Modeling
J. Manuf. Sci. Eng. June 2007, 129(3): 615–622.
doi: https://doi.org/10.1115/1.2714570
Topics:
Contact modeling
,
Manufacturing
,
Sheet metal
,
Simulation
,
Equilibrium (Physics)
,
Finite element analysis
,
Algorithms
A Dynamic Sensing-and-Modeling Approach to Three-Dimensional Point- and Area-Sensor Integration
J. Manuf. Sci. Eng. June 2007, 129(3): 623–635.
doi: https://doi.org/10.1115/1.2714585
Topics:
B-splines
,
Hull
,
Kalman filters
,
Modeling
,
Sensors
,
Uncertainty
,
Shapes
,
Lasers
A Technique for Enhancing Machine Tool Accuracy by Transferring the Metrology Reference From the Machine Tool to the Workpiece
J. Manuf. Sci. Eng. June 2007, 129(3): 636–643.
doi: https://doi.org/10.1115/1.2716718
Topics:
Calibration
,
Errors
,
Machine tools
,
Uncertainty
,
Machinery
,
Machining
,
Uncertainty analysis
,
Metrology
,
Coordinate measuring machines
Using Error Equivalence Concept to Automatically Adjust Discrete Manufacturing Processes for Dimensional Variation Control
J. Manuf. Sci. Eng. June 2007, 129(3): 644–652.
doi: https://doi.org/10.1115/1.2714581
Topics:
Control equipment
,
Errors
,
Feedback
,
Machining
,
Stability
,
Manufacturing
,
Machine tools
,
Statistical process control
Supervisory Factory Control Based on Real-Time Production Feedback
J. Manuf. Sci. Eng. June 2007, 129(3): 653–660.
doi: https://doi.org/10.1115/1.2673666
Topics:
Assembly lines
,
Feedback
,
Maintenance
,
Polishing equipment
,
Simulation
,
Machinery
,
Manufacturing systems
,
Cycles
,
Inertia (Mechanics)
,
Production control
Maintenance Opportunity Planning System
J. Manuf. Sci. Eng. June 2007, 129(3): 661–668.
doi: https://doi.org/10.1115/1.2716713
Topics:
Maintenance
,
Machinery
,
Polishing equipment
Email alerts
RSS Feeds
A Study on the Influence of Polypropylene Melt Flow Index on Nonwoven Fibers Produced Through Hot Melt Centrifugal Spinning
J. Manuf. Sci. Eng (April 2025)
Arc Characteristics of Aluminum Alloy Double-Wire High-Frequency Pulsed GMAW
J. Manuf. Sci. Eng (April 2025)