Skip Nav Destination
Issues
August 2006
ISSN 1087-1357
EISSN 1528-8935
In this Issue
Technical Papers
Finite Element Modeling and Analysis of Warm Forming of Aluminum Alloys—Validation Through Comparisons With Experiments and Determination of a Failure Criterion
J. Manuf. Sci. Eng. August 2006, 128(3): 613–621.
doi: https://doi.org/10.1115/1.2194065
Topics:
Failure
,
Finite element analysis
,
Temperature
,
Aluminum alloys
,
Forming limit diagrams
,
Blanks
,
Stress
,
Modeling
Determination of Proper Temperature Distribution for Warm Forming of Aluminum Sheet Materials
J. Manuf. Sci. Eng. August 2006, 128(3): 622–633.
doi: https://doi.org/10.1115/1.2162913
Topics:
Aluminum
,
Blanks
,
Finite element analysis
,
Friction
,
Temperature
,
Temperature distribution
,
Sheet materials
,
Tooling
,
Pressure
,
Corners (Structural elements)
Laser Forming of Varying Thickness Plate—Part I: Process Analysis
Peng Cheng, Yajun Fan, Jie Zhang, Y. Lawrence Yao, David P. Mika, Wenwu Zhang, Michael Graham, Jud Marte, Marshall Jones
J. Manuf. Sci. Eng. August 2006, 128(3): 634–641.
doi: https://doi.org/10.1115/1.2172280
Topics:
Deformation
,
Heat
,
Lasers
,
Plates (structures)
,
Temperature
,
Task analysis
,
Heating
,
Simulation
Laser Forming of Varying Thickness Plate—Part II: Process Synthesis
Peng Cheng, Yajun Fan, Jie Zhang, Y. Lawrence Yao, David P. Mika, Wenwu Zhang, Michael Graham, Jud Marte, Marshall Jones
J. Manuf. Sci. Eng. August 2006, 128(3): 642–650.
doi: https://doi.org/10.1115/1.2162912
Topics:
Heating
,
Lasers
,
Shapes
,
Plates (structures)
,
Process design
Angled Line Method for Measuring Continuously Distributed Strain in Sheet Bending
J. Manuf. Sci. Eng. August 2006, 128(3): 651–658.
doi: https://doi.org/10.1115/1.2193544
Topics:
Deformation
,
Displacement
,
Strain measurement
,
Moire method
,
Image processing
,
Sheet metal
,
Algorithms
,
Fourier transforms
An Analysis of the Effect of Laser Beam Geometry on Laser Transformation Hardening
J. Manuf. Sci. Eng. August 2006, 128(3): 659–667.
doi: https://doi.org/10.1115/1.2193547
Topics:
Cooling
,
Geometry
,
Hardening
,
Heating
,
Laser beams
,
Lasers
,
Shapes
,
Temperature
,
Steel
,
Heating and cooling
Influence of Machine Specific Instantaneous Current Wave Form on Resistance Spot Welding Process
J. Manuf. Sci. Eng. August 2006, 128(3): 668–676.
doi: https://doi.org/10.1115/1.2164507
Topics:
Electrodes
,
Machinery
,
Waves
,
Welding
Preform Design of Powder Metallurgy Turbine Disks Using Equi-Potential Line Method
J. Manuf. Sci. Eng. August 2006, 128(3): 677–682.
doi: https://doi.org/10.1115/1.2194066
Finite Element Modeling of Structural Relaxation During Annealing of a Precision-Molded Glass Lens
J. Manuf. Sci. Eng. August 2006, 128(3): 683–690.
doi: https://doi.org/10.1115/1.2163362
Topics:
Annealing
,
Glass
,
Lenses (Optics)
,
Molding
,
Relaxation (Physics)
,
Stress
,
Temperature
,
Thermal expansion
,
Finite element methods
Material Characterization of NiTi Based Memory Alloys Fabricated by the Laser Direct Metal Deposition Process
J. Manuf. Sci. Eng. August 2006, 128(3): 691–696.
doi: https://doi.org/10.1115/1.2193553
A Procedure for Measuring Planar Cam Profiles and Their Follower Motions
J. Manuf. Sci. Eng. August 2006, 128(3): 697–704.
doi: https://doi.org/10.1115/1.2163361
Topics:
Algorithms
,
B-splines
,
Coordinate measuring machines
,
Design
,
Disks
,
Displacement
,
Errors
,
Rollers
,
Cams
Optimal Parameter Selection for Electronic Packaging Using Sequential Computer Simulations
J. Manuf. Sci. Eng. August 2006, 128(3): 705–715.
doi: https://doi.org/10.1115/1.2193551
Polymer Flow in a Melt Pressure Regulator
J. Manuf. Sci. Eng. August 2006, 128(3): 716–722.
doi: https://doi.org/10.1115/1.2193545
Topics:
Flow (Dynamics)
,
Polymers
,
Pressure
,
Temperature
,
Valves
,
Design
,
Finite element analysis
,
Viscosity
,
Finite difference methods
,
Rheology
Nanomachining of Silicon Surface Using Atomic Force Microscope With Diamond Tip
Noritaka Kawasegi, Noboru Takano, Daisuke Oka, Noboru Morita, Shigeru Yamada, Kazutaka Kanda, Shigeto Takano, Tsutomu Obata, Kiwamu Ashida
J. Manuf. Sci. Eng. August 2006, 128(3): 723–729.
doi: https://doi.org/10.1115/1.2163364
Topics:
Atomic force microscopy
,
Cantilevers
,
Diamonds
,
Machining
,
Silicon
,
Crystals
,
Wear resistance
,
Chemical vapor deposition
,
Photolithography
,
Cutting
Material Strengthening Mechanisms and Their Contribution to Size Effect in Micro-Cutting
J. Manuf. Sci. Eng. August 2006, 128(3): 730–738.
doi: https://doi.org/10.1115/1.2193548
Topics:
Cutting
,
Size effect
,
Strain gradient
,
Temperature
,
Deformation
,
Simulation
Microstructure-Level Model for the Prediction of Tool Failure in WC-Co Cutting Tool Materials
J. Manuf. Sci. Eng. August 2006, 128(3): 739–748.
doi: https://doi.org/10.1115/1.2194233
Topics:
Cutting
,
Failure
,
Finite element analysis
,
Fracture (Materials)
,
Fracture (Process)
,
Machining
,
Simulation
,
Stress
,
Cutting tools
,
Ductile fracture
Dynamic Material Behavior Modeling Using Internal State Variable Plasticity and Its Application in Hard Machining Simulations
J. Manuf. Sci. Eng. August 2006, 128(3): 749–759.
doi: https://doi.org/10.1115/1.2193549
Topics:
Cutting
,
Engineering simulation
,
Machining
,
Plasticity
,
Simulation
,
Stress
,
Temperature
,
Finite element analysis
,
Modeling
,
Flow (Dynamics)
Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part I: Model Development
J. Manuf. Sci. Eng. August 2006, 128(3): 760–766.
doi: https://doi.org/10.1115/1.2193555
Topics:
Cutting
,
Deformation
,
Shear (Mechanics)
,
Temperature
,
Continuum mechanics
,
Friction
Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. August 2006, 128(3): 767–774.
doi: https://doi.org/10.1115/1.2193556
Topics:
Cutting
,
Temperature
,
Tool steel
,
Constitutive equations
,
Shear (Mechanics)
,
Deformation
,
Continuum mechanics
Toughness and Oblique Metalcutting
J. Manuf. Sci. Eng. August 2006, 128(3): 775–786.
doi: https://doi.org/10.1115/1.2164506
Topics:
Cutting
,
Fracture toughness
,
Friction
,
Machining
,
Shear (Mechanics)
,
Flow (Dynamics)
Flank Wear Progression During Machining Metal Matrix Composites
J. Manuf. Sci. Eng. August 2006, 128(3): 787–791.
doi: https://doi.org/10.1115/1.2164508
Topics:
Cutting
,
Machining
,
Metal matrix composites
,
Wear
,
Particulate matter
,
Abrasion
,
Cutting tools
A Wet Etching Method Coupled With Finite Element Analysis-Based Compliance Function to Determine Residual Stress in High-Speed Milling
J. Manuf. Sci. Eng. August 2006, 128(3): 792–801.
doi: https://doi.org/10.1115/1.2193550
Topics:
Stress
,
Finite element analysis
,
Cutting
,
Microhardness
,
Milling
,
Chemical etching
Experimental and Numerical Analysis of the Friction Drilling Process
J. Manuf. Sci. Eng. August 2006, 128(3): 802–810.
doi: https://doi.org/10.1115/1.2193554
Technical Briefs
The Constant Force Component due to Material Separation and Its Contribution to the Size Effect in Specific Cutting Energy
J. Manuf. Sci. Eng. August 2006, 128(3): 811–815.
doi: https://doi.org/10.1115/1.2163363
Topics:
Cutting
,
Separation (Technology)
,
Size effect
,
Fracture (Materials)
,
Ductile fracture
A New Wire-Driven Three Degree-of-Freedom Parallel Manipulator
J. Manuf. Sci. Eng. August 2006, 128(3): 816–819.
doi: https://doi.org/10.1115/1.2194061
Topics:
Manipulators
,
Wire
,
Error analysis
Machining a Micro/Meso Scale Structure Using a Minaturized Machine Tool by Using a Conventional Cutting Process
J. Manuf. Sci. Eng. August 2006, 128(3): 820–825.
doi: https://doi.org/10.1115/1.2194062
Topics:
Computer numerical control machine tools
,
Cutting
,
Machine tools
,
Machining
,
Machinery
,
Control equipment
,
Actuators
Design Innovation
Development of a Device for Measuring the Transverse Motion of a Saw-Wire
J. Manuf. Sci. Eng. August 2006, 128(3): 826–834.
doi: https://doi.org/10.1115/1.2194060
Topics:
Laser beams
,
Wire
,
Machinery
Email alerts
RSS Feeds
A Review on Metallic Drilling Burrs: Geometry, Formation, and Effect on the Mechanical Strength of Metallic Assemblies
J. Manuf. Sci. Eng (April 2025)
A Generalized Machining Process Damping Model for Orthogonal Cutting
J. Manuf. Sci. Eng