Skip Nav Destination
Issues
November 2002
ISSN 1087-1357
EISSN 1528-8935
In this Issue
Technical Papers
A Model for Predicting the Heat Flow into the Workpiece in Dry Drilling
J. Manuf. Sci. Eng. November 2002, 124(4): 773–777.
doi: https://doi.org/10.1115/1.1511176
Topics:
Cutting
,
Drilling
,
Drills (Tools)
,
Flow (Dynamics)
,
Heat
,
Heat flux
,
Shear (Mechanics)
,
Temperature
,
Finite element model
,
Stress
Drilling of Aramid and Carbon Fiber Polymer Composites
J. Manuf. Sci. Eng. November 2002, 124(4): 778–783.
doi: https://doi.org/10.1115/1.1505854
Topics:
Carbon fibers
,
Drilling
,
Laminates
,
Thrust
,
Cutting
,
Composite materials
,
Delamination
,
Drills (Tools)
,
Machining
,
Carbon
Fatigue Fracture Investigation of Cemented Carbide Tools in Gear Hobbing, Part 1: FEM Modeling of Fly Hobbing and Computational Interpretation of Experimental Results
J. Manuf. Sci. Eng. November 2002, 124(4): 784–791.
doi: https://doi.org/10.1115/1.1511172
Topics:
Cutting
,
Fatigue
,
Finite element methods
,
Finite element model
,
Fracture (Materials)
,
Gears
,
Stress
,
Carbide cutting tools
,
Modeling
,
Manufacturing
Fatigue Fracture Investigation of Cemented Carbide Tools in Gear Hobbing, Part 2: The Effect of Cutting Parameters on the Level of Tool Stresses—A Quantitative Parametric Analysis
J. Manuf. Sci. Eng. November 2002, 124(4): 792–798.
doi: https://doi.org/10.1115/1.1511173
Topics:
Cutting
,
Gears
,
Stress
,
Fatigue
,
Carbide cutting tools
,
Fracture (Materials)
,
Kinematics
Analysis of Sound Signal Generation Due to Flank Wear in Turning
J. Manuf. Sci. Eng. November 2002, 124(4): 799–808.
doi: https://doi.org/10.1115/1.1511177
An Experimental Study on Fatigue Life Variance, Residual Stress Variance, and Their Correlation of Face-Turned and Ground Ti 6Al-4V Samples
J. Manuf. Sci. Eng. November 2002, 124(4): 809–819.
doi: https://doi.org/10.1115/1.1511174
Machinability of Pearlitic Cast Iron With Cubic Boron Nitride (CBN) Cutting Tools
J. Manuf. Sci. Eng. November 2002, 124(4): 820–832.
doi: https://doi.org/10.1115/1.1511522
Topics:
Cast iron
,
Cutting
,
Cutting tools
,
Machinability
,
Wear
,
Milling
,
Machining
,
Temperature
Modeling of Residual Stress in Grinding of Nodular Cast Iron
J. Manuf. Sci. Eng. November 2002, 124(4): 833–839.
doi: https://doi.org/10.1115/1.1510519
Topics:
Grinding
,
Stress
,
Temperature
,
Cycles
Machining Quality and Cost: Estimation and Tradeoffs
Panicos Nicolaou, Research Assistant, Deborah L. Thurston, Professor, James V. Carnahan, Adjunct Professor
J. Manuf. Sci. Eng. November 2002, 124(4): 840–851.
doi: https://doi.org/10.1115/1.1511169
Hydrodynamic Physical Modeling of Laser Drilling
J. Manuf. Sci. Eng. November 2002, 124(4): 852–862.
doi: https://doi.org/10.1115/1.1510518
Topics:
Drilling
,
Lasers
,
Pressure
,
Temperature
,
Cooling
,
Forced convection
Modelling and Experimental Study Into the Laser Assisted Nitriding of Ti-6Al-4V Alloy
J. Manuf. Sci. Eng. November 2002, 124(4): 863–874.
doi: https://doi.org/10.1115/1.1511171
Topics:
Alloys
,
Diffusion (Physics)
,
Heating
,
Lasers
,
Nitriding
,
Nitrogen
,
Temperature
,
Thermal stresses
,
Melting
,
Temperature gradient
Laser-Assisted Machining of Reaction Sintered Mullite Ceramics
J. Manuf. Sci. Eng. November 2002, 124(4): 875–885.
doi: https://doi.org/10.1115/1.1511523
Topics:
Ceramics
,
Cutting
,
Lasers
,
Machining
,
Temperature
,
Wear
,
Surface roughness
,
Brittle fracture
Distortion of Rectangular Tubes in Stretch Bending
J. Manuf. Sci. Eng. November 2002, 124(4): 886–890.
doi: https://doi.org/10.1115/1.1511170
Topics:
Deformation
,
Energy conservation
,
Flanges
,
Manufacturing
,
Pressure
,
Shapes
Time Series Control Charts in the Presence of Model Uncertainty
J. Manuf. Sci. Eng. November 2002, 124(4): 891–898.
doi: https://doi.org/10.1115/1.1510520
Topics:
Errors
,
Quality control charts
,
Time series
,
Uncertainty
,
Modeling
,
Design
A Grammar-Based Framework for Integrating Design and Manufacturing
J. Manuf. Sci. Eng. November 2002, 124(4): 899–907.
doi: https://doi.org/10.1115/1.1511175
Topics:
Design
,
Manufacturing
,
Flow (Dynamics)
Environmentally Benign Manufacturing: Trends in Europe, Japan, and the USA
Dave Allen, Diana Bauer, Bert Bras, Tim Gutowski, Cindy Murphy, Tom Piwonka, Paul Sheng, John Sutherland, Deborah Thurston, Egon Wolff
J. Manuf. Sci. Eng. November 2002, 124(4): 908–920.
doi: https://doi.org/10.1115/1.1505855
Topics:
Manufacturing
,
Metals
,
Polymers
,
Recycling
,
Governments
Technical Briefs
A Method for Measuring the Temperature Distribution Along the Cutting Edges of a Drill
J. Manuf. Sci. Eng. November 2002, 124(4): 921–923.
doi: https://doi.org/10.1115/1.1511525
Topics:
Cutting
,
Drilling
,
Drills (Tools)
,
Temperature distribution
,
Thermocouples
A Data Mining Approach for Generation of Control Signatures
J. Manuf. Sci. Eng. November 2002, 124(4): 923–926.
doi: https://doi.org/10.1115/1.1511524
Topics:
Algorithms
,
Data mining
,
Metalworking
,
Set theory
,
Process control
,
Manufacturing
,
Decision making
,
Product quality