Topics: Cutting , Finite element methods , Flow (Dynamics) , Machining , Mechanical properties , Simulation , Steel , Stress , Temperature , Tensile testing

Floquet Theory Based Approach for Stability Analysis of the Variable Speed Face-Milling Process

Sridhar Sastry, Shiv G. Kapoor, Richard E. DeVor

J. Manuf. Sci. Eng. February 2002, 124(1): 10–17. doi: https://doi.org/10.1115/1.1418695

Abstract

View articletitled, Floquet Theory Based Approach for Stability Analysis of the Variable Speed Face-Milling Process

Open the PDF for in another window

Topics: Cutting , Degrees of freedom , Machining , Milling , Stability , Vibration , Simulation , Fourier analysis

Mechanistic Model for Tapping Process With Emphasis on Process Faults and Hole Geometry

Ajit Pal S. Dogra, Shiv G. Kapoor, Richard E. DeVor

J. Manuf. Sci. Eng. February 2002, 124(1): 18–25. doi: https://doi.org/10.1115/1.1430237

Abstract

View articletitled, Mechanistic Model for Tapping Process With Emphasis on Process Faults and Hole Geometry

Open the PDF for in another window

Topics: Cutting , Drilling , Geometry , Stress , Torque , Thread

Monitoring Cutting Forces In Turning: A Model-Based Approach

Jeffrey L. Stein, Professor, Kunsoo Huh, Associate Professor

J. Manuf. Sci. Eng. February 2002, 124(1): 26–31. doi: https://doi.org/10.1115/1.1432666

Abstract

View articletitled, Monitoring Cutting Forces In Turning: A Model-Based Approach

Open the PDF for in another window

Topics: Cutting , Engines , Motors , Friction

Finite Element Modeling of Edge Trimming Fiber Reinforced Plastics

D. Arola, M. B. Sultan, M. Ramulu

J. Manuf. Sci. Eng. February 2002, 124(1): 32–41. doi: https://doi.org/10.1115/1.1428329

Abstract

View articletitled, Finite Element Modeling of Edge Trimming Fiber Reinforced Plastics

Open the PDF for in another window

Topics: Cutting , Cutting tools , Fiber reinforced plastics , Fibers , Finite element analysis , Finite element model , Fracture (Materials) , Geometry , Stress , Stress concentration

Gear Hobbing Cutting Process Simulation and Tool Wear Prediction Models

K.-D. Bouzakis, S. Kombogiannis, A. Antoniadis, N. Vidakis

J. Manuf. Sci. Eng. February 2002, 124(1): 42–51. doi: https://doi.org/10.1115/1.1430236

Abstract

View articletitled, Gear Hobbing Cutting Process Simulation and Tool Wear Prediction Models

Open the PDF for in another window

Topics: Cutting , Gears , Wear

An On-line Condition Monitoring and Diagnosis System for Feed Rolls in the Plate Mill

J. J. Jeng, Associate Scientist, C. Y. Wei, Associate Scientist

J. Manuf. Sci. Eng. February 2002, 124(1): 52–57. doi: https://doi.org/10.1115/1.1286133

Abstract

View articletitled, An On-line Condition Monitoring and Diagnosis System for Feed Rolls in the Plate Mill

Open the PDF for in another window

Topics: Bearings , Condition monitoring , Signals , Vibration , Shock (Mechanics)

Feasibility of Plasma Spraying in Developing MMC Coatings: Modeling the Heating of Coated Powder Particles

Marios D. Demetriou, Adrienne S. Lavine, Nasr M. Ghoniem

J. Manuf. Sci. Eng. February 2002, 124(1): 58–64. doi: https://doi.org/10.1115/1.1403742

Abstract

View articletitled, Feasibility of Plasma Spraying in Developing MMC Coatings: Modeling the Heating of Coated Powder Particles

Open the PDF for in another window

Topics: Coatings , Particulate matter , Plasmas (Ionized gases) , Temperature

Criterion for Prevention of Central Bursting in Forward Extrusions Through Spherical Dies Using the Finite Element Method

S. Sriram, C. J. Van Tyne

J. Manuf. Sci. Eng. February 2002, 124(1): 65–70. doi: https://doi.org/10.1115/1.1413776

Abstract

View articletitled, Criterion for Prevention of Central Bursting in Forward Extrusions Through Spherical Dies Using the Finite Element Method

Open the PDF for in another window

Topics: Extruding , Finite element methods , Stress , Failure , Deformation , Work hardening , Friction , Finite element analysis

Analysis of Cold Extrusion of Non Re-entry Product Shapes

Santosh Kumar, Department of Mechanical Engineering, Kripa Shanker, Industrial and Management Engineering Department, G. K. Lal, Fellow ASME, Department of Mechanical Engineering

J. Manuf. Sci. Eng. February 2002, 124(1): 71–78. doi: https://doi.org/10.1115/1.1413777

Abstract

View articletitled, Analysis of Cold Extrusion of Non Re-entry Product Shapes

Open the PDF for in another window

Topics: Extruding , Shapes , Deformation , Friction

Suppressing Cracking in Resistance Welding AA5754 by Mechanical Means

Hongyan Zhang, Jacek Senkara, Xin Wu

J. Manuf. Sci. Eng. February 2002, 124(1): 79–85. doi: https://doi.org/10.1115/1.1418693

Abstract

View articletitled, Suppressing Cracking in Resistance Welding AA5754 by Mechanical Means

Open the PDF for in another window

Topics: Cracking (Materials) , Fracture (Materials) , Fracture (Process) , Welding , Electrodes , Temperature

Development of a Dilatometer for Measurement of the PVT Properties of a $Polymer / {CO}_{2}$ Solution Using a Foaming Extruder and a Gear Pump

Simon S. Park, Chul B. Park, Dmitry Ladin, Hani E. Naguib, Costas Tzoganakis

J. Manuf. Sci. Eng. February 2002, 124(1): 86–91. doi: https://doi.org/10.1115/1.1418696

Abstract

View articletitled, Development of a Dilatometer for Measurement of the PVT Properties of a <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mtext mathvariant="italic">Polymer</mtext><mtext>/</mtext><msub><mtext mathvariant="italic">CO</mtext><mrow><mn>2</mn></mrow></msub></mrow></math></span> Solution Using a Foaming Extruder and a Gear Pump

Open the PDF for in another window

Topics: Carbon dioxide , Flow (Dynamics) , Gear pumps , Polymers , Pressure , Temperature , Design , Extruding

Extrusion Through Spherical Dies—An Upper Bound Analysis

W. A. Gordon, Research Engineer,, C. J. Van Tyne, FIERF Professor,, S. Sriram, Senior Research Engineer,

J. Manuf. Sci. Eng. February 2002, 124(1): 92–97. doi: https://doi.org/10.1115/1.1419198

Abstract

View articletitled, Extrusion Through Spherical Dies—An Upper Bound Analysis

Open the PDF for in another window

Topics: Deformation , Extruding , Shear (Mechanics) , Friction

Fixturing Analysis For Stability Consideration in an Automated Fixture Design System

Utpal Roy, Jianmin Liao

J. Manuf. Sci. Eng. February 2002, 124(1): 98–104. doi: https://doi.org/10.1115/1.1413778

Abstract

View articletitled, Fixturing Analysis For Stability Consideration in an Automated Fixture Design System

Open the PDF for in another window

Topics: Design , Fixturing , Stability , Machining

A Cable Extension Transducer Based Two-Dimensional Position Sensor for Industrial Applications

Daehie Hong, Associate Professor,, Keith J. Mueller, Former Graduate Student, Steven A. Velinsky, Professor

J. Manuf. Sci. Eng. February 2002, 124(1): 105–108. doi: https://doi.org/10.1115/1.1414125

Abstract

View articletitled, A Cable Extension Transducer Based Two-Dimensional Position Sensor for Industrial Applications

Open the PDF for in another window

Topics: Cables , Sensors , Transducers , Design

A Dexterous Part-Holding Model for Handling Compliant Sheet Metal Parts

H. F. Li, D. Ceglarek, Jianjun Shi

J. Manuf. Sci. Eng. February 2002, 124(1): 109–118. doi: https://doi.org/10.1115/1.1406953

Abstract

View articletitled, A Dexterous Part-Holding Model for Handling Compliant Sheet Metal Parts

Open the PDF for in another window

Topics: Deformation , End effectors , Sheet metal , Simulation , Materials handling , Parameter estimation , Design , Finite element analysis , Springs , Vacuum

Iterative Fixture Layout and Clamping Force Optimization Using the Genetic Algorithm

Krishnakumar Kulankara, Srinath Satyanarayana, Shreyes N. Melkote

J. Manuf. Sci. Eng. February 2002, 124(1): 119–125. doi: https://doi.org/10.1115/1.1414127

Abstract

View articletitled, Iterative Fixture Layout and Clamping Force Optimization Using the Genetic Algorithm

Open the PDF for in another window

Topics: Genetic algorithms , Machining , Optimization , Deformation , Design , Finite element model

Digital Projector Calibration for 3-D Active Vision Systems

Tzung-Sz Shen, Chia-Hsiang Menq

J. Manuf. Sci. Eng. February 2002, 124(1): 126–134. doi: https://doi.org/10.1115/1.1418694

Abstract

View articletitled, Digital Projector Calibration for 3-D Active Vision Systems

Open the PDF for in another window

Topics: Calibration

Distortion in Thermal Field Around Inserted Thermocouples in Experimental Interfacial Studies, Part 4: End Effect

M. H. Attia, Fellow ASME Adjunct Professor,, A. Cameron, Research Assistant, L. Kops, Fellow ASME

J. Manuf. Sci. Eng. February 2002, 124(1): 135–145. doi: https://doi.org/10.1115/1.1419199

Abstract

View articletitled, Distortion in Thermal Field Around Inserted Thermocouples in Experimental Interfacial Studies, Part 4: End Effect

Open the PDF for in another window

Topics: Errors , Flow (Dynamics) , Temperature , Temperature measurement , Thermocouples , Heat , Finite element analysis , Wire , Fillers (Materials)

Role of Cryogenic Cooling on Cutting Temperature in Turning Steel

N. R. Dhar, Assistant Professor,, S. Paul, Assistant Professor,, A. B. Chattopadhyay, Professor,

J. Manuf. Sci. Eng. February 2002, 124(1): 146–154. doi: https://doi.org/10.1115/1.1413774

Abstract

View articletitled, Role of Cryogenic Cooling on Cutting Temperature in Turning Steel

Open the PDF for in another window

Topics: Cooling , Cutting , Machining , Temperature

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Effect of Microgravity on the Metal Droplet Transfer and Bead Characteristics in the Directed Energy Deposition-Arc Process

J. Manuf. Sci. Eng (December 2024)

Reducing Laser Exposure Time of PBF-LB/P by Providing High Energy Without Thermal Degradation and Its Effect on Part Strength and Process Time

J. Manuf. Sci. Eng (January 2025)

Femtosecond Pulsed Laser Machining of Fused Silica for Micro-Cavities With Sharp Corners

J. Manuf. Sci. Eng (January 2025)

Acquired Angle Error Correction Based on Variation of an Angle Detection Signal Intensity in Rotary Encoders

J. Manuf. Sci. Eng (January 2025)

A Simple Approach to Transient-State Modeling of Nitrogen Cooling in the Extrusion of Light-Alloy Complex Profiles

J. Manuf. Sci. Eng (February 2025)

Technical Papers

Mechanical Properties of Hardened AISI 52100 Steel in Hard Machining Processes

Floquet Theory Based Approach for Stability Analysis of the Variable Speed Face-Milling Process

Mechanistic Model for Tapping Process With Emphasis on Process Faults and Hole Geometry

Monitoring Cutting Forces In Turning: A Model-Based Approach

Finite Element Modeling of Edge Trimming Fiber Reinforced Plastics

Gear Hobbing Cutting Process Simulation and Tool Wear Prediction Models

An On-line Condition Monitoring and Diagnosis System for Feed Rolls in the Plate Mill

Feasibility of Plasma Spraying in Developing MMC Coatings: Modeling the Heating of Coated Powder Particles

Criterion for Prevention of Central Bursting in Forward Extrusions Through Spherical Dies Using the Finite Element Method

Analysis of Cold Extrusion of Non Re-entry Product Shapes

Suppressing Cracking in Resistance Welding AA5754 by Mechanical Means

Development of a Dilatometer for Measurement of the PVT Properties of a $Polymer / {CO}_{2}$ Solution Using a Foaming Extruder and a Gear Pump

Extrusion Through Spherical Dies—An Upper Bound Analysis

Fixturing Analysis For Stability Consideration in an Automated Fixture Design System

A Cable Extension Transducer Based Two-Dimensional Position Sensor for Industrial Applications

A Dexterous Part-Holding Model for Handling Compliant Sheet Metal Parts

Iterative Fixture Layout and Clamping Force Optimization Using the Genetic Algorithm

Digital Projector Calibration for 3-D Active Vision Systems

Distortion in Thermal Field Around Inserted Thermocouples in Experimental Interfacial Studies, Part 4: End Effect

Role of Cryogenic Cooling on Cutting Temperature in Turning Steel

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only