In this study, the Fickian diffusion formulation is extended to the adhesive layer of a single lap joint (SLJ) model, in order to develop a coupled peel and shear stress-diffusion model. Constitutive equations are formulated for shear and peel stresses in terms of adhesive material properties that are time- and location-dependent. Numerical solution is provided for the effect of diffusion on shear and peel stresses distribution. Detailed discussion of the results is presented.
Issue Section:
Research Papers
References
1.
Brockmann
, W.
, Geiß
, P. L.
, Klingen
, J.
, Schröder
, B.
, and Mikhail
, B.
, 2009
, Adhesive Bonding
, Wiley-VCH
, Weinheim, Germany
.2.
FAA,
2012
, Aviation Maintenance Technician Handbook—Airframe
, United States Department of Transportation, Federal Aviation Administration
, Oklahoma City, OK
, pp. 13
–22
.3.
Volkersen
, O.
, 1938
, “Die Nietkraftverteilung in zugbeanspruchten Nietverbindungen mit konstanten Laschenquerschnitten
,” Luftfahrtforschung
, 15
(1/2
), pp. 41
–47
.4.
Goland
, M.
, and Reissner
, E.
, 1944
, “The Stresses in Cemented Joints
,” ASME J. Appl. Mech.
, 11
(1
), pp. A17
–A27
.5.
Hart-Smith
, L. J.
, 1973
, “Adhesive-Bonded Single-Lap Joints
,” Douglas Aircraft Co., Inc., Long Beach, CA, Technical Report No. NASA-CR-112236
.https://ntrs.nasa.gov/search.jsp?R=197400050836.
Tong
, L.
, 1996
, “Bond Strength for Adhesive-Bonded Single-Lap Joints
,” Acta Mech.
, 117
(1–4
), pp. 101
–113
.7.
Allman
, D.
, 1977
, “A Theory for Elastic Stresses in Adhesive Bonded Lap Joints
,” Q. J. Mech. Appl. Math.
, 30
(4
), pp. 415
–436
.8.
Renton
, W. J.
, and Vinson
, J. R.
, 1975
, “The Efficient Design of Adhesive Bonded Joints
,” J. Adhes.
, 7
(3
), pp. 175
–193
.9.
Srinivas
, S.
, 1975
, “Analysis of Bonded Joints
,” Langley Research Center, Hampton, VA, Technical Report No. NASA TN D-7855
.https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19750013601.pdf10.
Chen
, D.
, and Cheng
, S.
, 1983
, “An Analysis of Adhesive-Bonded Single-Lap Joints
,” ASME J. Appl. Mech.
, 50
(1
), pp. 109
–115
.11.
Bigwood
, D.
, and Crocombe
, A.
, 1989
, “Elastic Analysis and Engineering Design Formulae for Bonded Joints
,” Int. J. Adhes. Adhes.
, 9
(4
), pp. 229
–242
.12.
Bigwood
, D.
, and Crocombe
, A.
, 1990
, “Non-Linear Adhesive Bonded Joint Design Analyses
,” Int. J. Adhes. Adhes.
, 10
(1
), pp. 31
–41
.13.
Sawa
, T.
, Nakano
, K.
, and Toratani
, H.
, 1997
, “A Two-Dimensional Stress Analysis of Single-Lap Adhesive Joints Subjected to Tensile Loads
,” J. Adhes. Sci. Technol.
, 11
(8
), pp. 1039
–1056
.14.
Sawa
, T.
, Liu
, J.
, Nakano
, K.
, and Tanaka
, J.
, 2000
, “A Two-Dimensional Stress Analysis of Single-Lap Adhesive Joints of Dissimilar Adherends Subjected to Tensile Loads
,” J. Adhes. Sci. Technol.
, 14
(1
), pp. 43
–66
.15.
Oplinger
, D.
, 1994
, “Effects of Adherend Deflections in Single Lap Joints
,” Int. J. Solids Struct.
, 31
(18
), pp. 2565
–2587
.16.
Tsai
, M.
, Oplinger
, D.
, and Morton
, J.
, 1998
, “Improved Theoretical Solutions for Adhesive Lap Joints
,” Int. J. Solids Struct.
, 35
(12
), pp. 1163
–1185
.17.
da Silva
, L. F. M.
, and Öchsner
, A.
, 2008
, Modeling of Adhesively Bonded Joints
, Springer
, Berlin
.18.
da Silva
, L. F.
, das Neves
, P. J.
, Adams
, R.
, and Spelt
, J.
, 2009
, “Analytical Models of Adhesively Bonded Joints—Part I: Literature Survey
,” Int. J. Adhes. Adhes.
, 29
(3
), pp. 319
–330
.19.
da Silva
, L. F.
, das Neves
, P. J.
, Adams
, R.
, Wang
, A.
, and Spelt
, J.
, 2009
, “Analytical Models of Adhesively Bonded Joints—Part II: Comparative Study
,” Int. J. Adhes. Adhes.
, 29
(3
), pp. 331
–341
.20.
Nassar
, S. A.
, and Sakai
, K.
, 2015
, “Effect of Cyclic Heat, Humidity, and Joining Method on the Static and Dynamic Performance of Lightweight Multimaterial Single-Lap Joints
,” ASME J. Manuf. Sci. Eng.
, 137
(5
), p. 051026
.21.
Nassar
, S. A.
, Wu
, Z.
, Moustafa
, K.
, and Tzelepis
, D.
, 2015
, “Effect of Adhesive Nanoparticle Enrichment on Static Load Transfer Capacity and Failure Mode of Bonded Steel–Magnesium Single Lap Joints
,” ASME J. Manuf. Sci. Eng.
, 137
(5
), p. 051024
.22.
Nassar
, S. A.
, and Mazhari
, E.
, 2016
, “A Coupled Shear Stress-Diffusion Model for Adhesively Bonded Single Lap joints
,” ASME J. Appl. Mech.
, 83
(10
), p. 101006
.23.
Crank
, J.
, 1979
, The Mathematics of Diffusion
, Oxford University Press
, London
.24.
Timoshenko
, S. P.
, and Woinowsky-Krieger
, S.
, 1959
, Theory of Plates and Shells
, McGraw-Hill
, New York
.25.
Wahab
, M. A.
, Crocombe
, A.
, Beevers
, A.
, and Ebtehaj
, K.
, 2002
, “Coupled Stress-Diffusion Analysis for Durability Study in Adhesively Bonded Joints
,” Int. J. Adhes. Adhes.
, 22
(1
), pp. 61
–73
.Copyright © 2017 by ASME
You do not currently have access to this content.
