Metal working fluid (MWF) emulsions are utilized as coolants and lubricants in machining processes like turning or drilling. During their operation life time cycle, MWFs change their properties due to impacting stresses which may influence the machining and tool performance. A frequent refreshing or renewal of MWFs in machining process is thus necessary. This investigation discusses measurement techniques of MWF emulsions to be used for MWF quality assessment and process monitoring. By means of optical spectroscopic measurement techniques (turbidimetry and laser diffraction), the evaluation of the temporal change of the wavelength exponent and the MWF emulsion droplet size is related to the MWF stability. The in-process monitoring of the MWFs in machining during several weeks of operation is shown. Thus, it will be demonstrated that optical spectroscopic measurement techniques may be applied to determine stability change of the emulsion system.
Skip Nav Destination
Article navigation
April 2017
Technical Briefs
Continuous Monitoring of Metal Working Fluid Quality in Machining Processes
Benjamin Glasse,
Benjamin Glasse
Particles and Process Engineering,
University Bremen,
Badgasteiner Straße 3,
Bremen 28359, Germany
University Bremen,
Badgasteiner Straße 3,
Bremen 28359, Germany
Search for other works by this author on:
Udo Fritsching
Udo Fritsching
Professor
Particles and Process Engineering,
University Bremen,
Badgasteiner Straße 3,
Bremen 28359, Germany;
Institute of Materials Science,
Badgasteiner Straße 3,
Bremen 28359, Germany
e-mail: ufri@iwt.uni-bremen.de
Particles and Process Engineering,
University Bremen,
Badgasteiner Straße 3,
Bremen 28359, Germany;
Institute of Materials Science,
Badgasteiner Straße 3,
Bremen 28359, Germany
e-mail: ufri@iwt.uni-bremen.de
Search for other works by this author on:
Benjamin Glasse
Particles and Process Engineering,
University Bremen,
Badgasteiner Straße 3,
Bremen 28359, Germany
University Bremen,
Badgasteiner Straße 3,
Bremen 28359, Germany
Udo Fritsching
Professor
Particles and Process Engineering,
University Bremen,
Badgasteiner Straße 3,
Bremen 28359, Germany;
Institute of Materials Science,
Badgasteiner Straße 3,
Bremen 28359, Germany
e-mail: ufri@iwt.uni-bremen.de
Particles and Process Engineering,
University Bremen,
Badgasteiner Straße 3,
Bremen 28359, Germany;
Institute of Materials Science,
Badgasteiner Straße 3,
Bremen 28359, Germany
e-mail: ufri@iwt.uni-bremen.de
1Corresponding author.
Manuscript received November 2, 2015; final manuscript received September 23, 2016; published online October 18, 2016. Assoc. Editor: Laine Mears.
J. Manuf. Sci. Eng. Apr 2017, 139(4): 044501 (5 pages)
Published Online: October 18, 2016
Article history
Received:
November 2, 2015
Revised:
September 23, 2016
Citation
Glasse, B., and Fritsching, U. (October 18, 2016). "Continuous Monitoring of Metal Working Fluid Quality in Machining Processes." ASME. J. Manuf. Sci. Eng. April 2017; 139(4): 044501. https://doi.org/10.1115/1.4034889
Download citation file:
Get Email Alerts
Cited By
A Digital Twin–Based Environment-Adaptive Assignment Method for Human–Robot Collaboration
J. Manuf. Sci. Eng (March 2024)
Tilting Behaviors of Metal Microjet in Laser-Induced Forward Transfer
J. Manuf. Sci. Eng (March 2024)
A Review of Prospects and Opportunities in Disassembly With Human–Robot Collaboration
J. Manuf. Sci. Eng (February 2024)
Related Articles
Orthogonal Analysis of Multisensor Data Fusion for Improved Quality Control
J. Manuf. Sci. Eng (October,2017)
Real-Time Acoustic and Pressure Characterization of Two-Phase Flow for Quality Control of Expanded Polystyrene Injection Molding Processes
J. Manuf. Sci. Eng (May,2016)
Multifractal Analysis of Image Profiles for the Characterization and Detection of Defects in Additive Manufacturing
J. Manuf. Sci. Eng (March,2018)
In Situ Monitoring of Optical Emission Spectra for Microscopic Pores in Metal Additive Manufacturing
J. Manuf. Sci. Eng (January,2022)
Related Proceedings Papers
Related Chapters
Computer Aided Design of Tools, Dies, and Moulds (TDMs)
Computer Aided Design and Manufacturing
Energy Consumption
Engineering Practice with Oilfield and Drilling Applications
How the Worm Gear Developed through Time
Design and Application of the Worm Gear