This paper analyzes the impact of machining parameter selection on machining system productivity. The method involves prediction of machine tool reliability from mechanical failure based on process choices and production rate. The machine reliability is then input to a machining system production configuration to estimate productivity. Through a simple turning model example, it is demonstrated that an optimal production rate for maximum productivity exists. The best system configuration for maximum productivity is shown to be affected by the level of machine reliability and the choice of process parameters.

1.
Black
,
J.
, and
Mejabi
,
O.
,
1995
, “
Simulation of Complex Manufacturing Equipment Reliability Using Object Oriented Methods
,”
Reliability Eng. Sys. Safety
,
48
, No.
1
, pp.
11
18
.
2.
Koren, Y., and Ulsoy, A. G., 1997, Reconfigurable Manufacturing Systems, Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS) Report #1, The University of Michigan, Ann Arbor.
3.
Koren
,
K.
,
Hu
,
S. J.
, and
Weber
,
T.
,
1998
, “
Impact of Manufacturing System Configuration on Performance
,”
CIRP Ann.
,
47
, No.
1
, pp.
369
372
.
4.
Schoch
,
D.
,
1994
, “
Critical Factors for Achievement of Successful High Speed Metal Forming Production
,”
J. Mater. Process. Technol.
,
46
, No.
3–4
, Nov., pp.
409
414
.
5.
El-Gizawy
,
A. S.
,
Hwang
,
J.-Y.
, and
Brewer
,
D.
,
1990
, “
A Strategy for Integrating Product and Process Design of Aerospace Components
,”
Manufacturing Review
,
3
, No.
3
, Sept., pp.
178
186
.
6.
Malakooti
,
B.
, and
Raman
,
V.
,
2000
, “
An Interactive Multi-Objective Artificial Neural Network Approach for Machine Setup Optimization
,”
Journal of Intelligent Manufacturing
,
11
, No.
1
, pp.
41
50
.
7.
Kusiak, A., and Lee, G. H., 1996, “Design For Manufacturing Environment,” IECON Proceedings (Industrial Electronics Conference), IEEE, Vol. 1, pp. xlv–lv.
8.
Chen
,
M.-C.
, and
Tsai
,
D.-M.
,
1996
, “
A Simulated Annealing Approach for Optimization of Multi-Pass Turning Operations
,”
Int. J. Prod. Res.
,
34
, No.
10
, Oct., pp.
2803
2825
.
9.
Datsko, J., 1966, Material Properties and Manufacturing Processes, Joseph Datsko Consultants, Ann Arbor, Michigan, p. 416.
10.
Green, R., Ed., 1992, Machinery’s Handbook, 24th Edition, Industrial Press, Inc., New York. pp. 1002–1009.
11.
Kronenberg, M., 1966, Machining Science and Application, Pergamon Press, Oxford, p. 174.
12.
Stephenson, D., and Agapiou, J., 1997, Metal Cutting Theory and Practice, Marcel Dekker, New York, p. 501.
13.
Hagen, E., 1980, Probabilistic Mechanical Design, Robert Krieger Publishing, Malabar, FL, pp. 363–365.
You do not currently have access to this content.