... e-mail:  Milind.Jog@Uc.edu 04 03 2021 19 05 2021 08 09 2021 plate orifice bubble dynamics wetting contact angle capillarity Ebullience from submerged orifices is encountered in many industrial processes such as aeration, frothing, and wastewater remediation...

... HNF droplet spreads up to the boundary of its partially wetted residue surface resulting in a large contact radius with increasing residue size up to ( V fd / V sd ) c . Moreover, further increasing the droplet volume ratio as V fd / V sd  > ( V fd / V sd ) c does not much affect...

... 09 2011 15 02 2012 15 02 2012 chemically reactive flow flames flow simulation fuel organic compounds two-phase flow wetting concurrent flame spread methanol pool liquid–gas interface flame spread velocity flame anchoring point The following assumptions...

... role in the heat transfer mechanism. For instance, Phan et al. [( 7 )] showed that surface wettability affects the pool boiling heat transfer significantly. Modifying the surface wetting is, thereby, a reasonable solution to achieve the above objectives. Today, significant advances have been made...

... and enhance heat transfer, in particular, for the steam-air mixture vapor. In the present paper, steam DWC heat transfer characteristics in the presence of noncondensable gas (NCG) were investigated experimentally on superhydrophobic and hydrophobic surfaces including the wetting mode evolution...

... 02 09 2011 boiling drops heat transfer jets microchannel flow sprays two-phase flow wetting high heat flux extreme-high heat flxu jet impingement spray microchannel piezoelectric droplet wettability electronic cooling thermal management According...

... surface tension two-phase flow wetting 2011 American Society of Mechanical Engineers ...

... texture water wetting 2011 American Society of Mechanical Engineers ...

...Yulong Ji; Hsiu-hung Chen; Qingsong Yu; Xuehu Ma; H. B. Ma 27 04 2011 27 04 2011 coatings contact angle cooling copper hydrophobicity monolayers organic compounds self-assembly wetting 2011 American Society of Mechanical Engineers ...

... condensation form is still not clear. We suggest a condensation model based on droplet nucleation and growth on elevated precipitates, resulting in short-term steam entrapment after droplet coalescence. According to the wetting theory, this transition state yields increased macroscopic contact angles...

... the different flame growth features between the thick- and thin-solid fuel samples. 07 10 2009 19 04 2010 28 06 2010 28 06 2010 chemically reactive flow external flows flames flow simulation heat radiation numerical analysis wetting solid flame spread fire growth...

...C. Dietz; K. Rykaczewski; A. Fedorov; Y. Joshi condensation contact angle copper compounds drops heat transfer hydrophobicity nanostructured materials scanning electron microscopy wetting 11 06 2010 11 06 2010 2010 American Society of Mechanical Engineers ...

...Dong Hwan Shin; Seong Hyuk Lee; Scott Retterer; Chang Kyoung Choi contact angle drops evaporation flow visualisation hydrophobicity two-phase flow water wetting 11 06 2010 11 06 2010 2010 American Society of Mechanical Engineers ...

... magnitude of CHF enhancement in pure water as for nanofluids. Subsequent to the boiling experiments, the interfacial properties of the heater surfaces were examined using dynamic wetting of an evaporating water droplet. As the surface temperature increased, the evaporating meniscus on the clean surface...

... surfaces with enhanced boiling heat transfer performance and novel phase-change based micro-actuators and energy harvesters. 28 09 2007 28 03 2008 15 10 2009 bubbles cavitation flow simulation hydrophobicity wetting single bubble hydrophobic surface nucleate boiling...

... a wide range of tested conditions. The potential of this new approach and possible refinements that will add engineering value are discussed. 07 12 2007 18 06 2008 18 03 2009 Although wet-surface performance has been studied extensively, there is limited information in the open...

... the disjoining pressure concept. The perfectly wetting case is described using the usual h − 3 disjoining pressure. The partially wetting case is modeled using the integrated 6–12 Lennard-Jones potential. The developed model is used for investigating the effects of the surface topography, gravity...

... for velocity and temperature profiles. The effects of different parameters are discussed through graphs. 23 06 2007 11 04 2008 16 09 2008 differential equations flow through porous media heat transfer magnetohydrodynamics rotational flow transforms viscosity wetting three...

...S. K. Sahu; P. K. Das; S. Bhattacharyya The effect of precursory cooling on conduction-controlled rewetting of both slab and solid cylinder is analyzed by the heat balance integral method. A constant heat transfer coefficient is assumed in the wet region behind the wet front, while an exponentially...

... of disjoining pressure profiles of the pentane and octane menisci during ( a ) isothermal and ( b ) nonisothermal states 07 07 2006 18 03 2007 capillarity evaporation film flow liquid films organic compounds shear flow surface tension wetting contact line...