...Chunsheng Guo; Cheng Jiang; Jun Ma; Yingwen Cao; Yong Zou; Yong Liu Porous wicks are a key component of loop heat pipes (LHPs). In order to enhance the antigravity and long-distance operation ability of the LHP, a porous wick is required to have the characteristics of high permeability and high...

..., viz. , effective thermal conductivity and permeability, is analyzed. The effective thermal conductivity increases monotonically as either the sintering time or temperature is increased. Permeability is observed to increase with particle size and porosity. As sintering progresses, the slight increase...

...L. Jiang; L. W. Wang; Z. Q. Jin; B. Tian; R. Z. Wang Properties, such as thermal conductivity and permeability, are important for the heat and mass transfer performance in sorption refrigeration. This Technical Brief investigates the thermal conductivity and permeability of eight types of chlorides...

... these effective properties by conducting direct simulations in an idealized spherical void phase geometry and use the results to establish closure relations to be employed in a volume-averaged framework. To close the volume-averaged momentum equation, we determine the permeability as defined by Darcy’s law...

... of such devices. Three sintered copper wick samples employed in commercial heat pipes are characterized in this work in terms of their thermal transport properties––porosity, effective thermal conductivity, permeability, and interfacial heat transfer coefficient. The commercially available samples of nearly...

..., as well as, by the boundary conditions. A horizontal porous layer bounded by impermeable and infinitely wide walls is considered. The lower boundary is assumed to be thermally insulated, while the upper boundary is assumed to be isothermal. A transverse heterogeneity for the permeability...

...Rosemarie Mohais; Chaoshui Xu; Peter Dowd We present an analysis of fluid flow and heat transfer through a single horizontal channel with permeable walls which are at different temperatures. The problem is set in the context of hot dry rock geothermal energy extraction where water, introduced...

... conductivity but low permeability are investigated for convection heat transfer enhancement using air as coolant. Two novel heat sink structures are designed to reduce the fluid pressure drop. Both experimental and numerical approaches are adopted in the study. The experimental data show that the designed...

.... The synchronous and subharmonic resonant regions of dynamic instability are determined and their critical boundaries are found. The results show that anisotropy in permeability favors convection whereas that in thermal conductivity suppresses it with a wider cellular pattern at the instability threshold...

..., are used to estimate the permeability and the equivalent thermal conductivity of the capillary structure filled with methanol or FC72. These parameters are obtained from a comparison between the experimental data and an analytical model. Finally, the model is used to compare the draining capability...

... insert. Different metallic foams with various porosities and permeabilities are used in the numerical analysis. The effects of air flow Reynolds number and metal foam porosity and permeability on the overall Nusselt number, pressure drop, and the efficiency of heat sink are investigated. The results...

... elementary volume edge size, and mean pore size. Finite volume techniques are applied for conductive/convective heat transfer and flow characterization, which includes the determination of the thermal conductivity, interfacial heat transfer coefficient, permeability, Dupuit–Forchheimer coefficient, residence...

... experiments using dual-permeability models, similar to the models used for performance assessment analyses of flow and seepage in unsaturated fractured tuff at Yucca Mountain. Comparisons were made between the simulations and experimental data from small-scale drift-shadow tests. Results showed that the dual...

... the rapid compaction of the porous material was measured. The consolidation theory developed by Wu et al. was modified by introducing the damping effect from the solid phase of the porous materials. One uses Carman–Kozeny's relationship to describe the change in the permeability as a function of compression...

... distribution of any static property of the porous medium, such as its permeability, or a dynamic property, such as the spatial distribution of the local fluid velocities in the medium. The method is a multiscale approach that takes into account the effect of the heterogeneities at all the length scales...

... as the working fluid, which is the most acceptable combination in electronic cooling applications. In the investigation, wick structures with different physical properties including thermal conductivity, pore radius, porosity, and permeability and with different structural topology including monoporous...

...A. V. Kuznetsov; D. A. Nield Flow in a three-layer channel is modeled analytically. The channel consists of a transition layer sandwiched between a porous medium and a fluid clear of solid material. Within the transition layer, the reciprocal of the permeability varies linearly across the channel...

..., and was equal to 0.64. The liquid permeability and maximum capillary pressure of small pores were found to be a linear function of the particle diameter. Similarly, vapor permeability was found to be a linear function of the cluster diameter. The thermal conductivity of monoporous samples was measured to be 142...

... for freckles formation. This criterion, when expressed in terms of physical properties and process parameters, yields the condition for plume formation as a function of concentration, liquid fraction, permeability, growth rate of a mushy layer, and thermophysical properties. Subsequently, numerical simulations...

... of the fluid layer consists of a steady part and a time-dependent oscillatory part. Only infinitesimal disturbances are considered. The combined effect of permeability, rotation, vertical magnetic field, and temperature modulation has been investigated using Galerkin’s method and Floquet theory. The value...