This paper describes an experimental assessment of the transient performance of a multi-objective adaptive approach to the control of flexible rotors. This is applicable to any arrangement of controllable bearings or actuators. In the case reported here, the rotor is supported by active magnetic bearings. The theory underlying the controller is outlined. The objectives include minimization of the forces transmitted to the base while restricting rotor vibrations to a user-defined limit. A third objective is to prevent rotor contact with the auxiliary bearings, which are used to protect the active elements. These objectives are met by a two-stage weighting strategy followed by the adaptive control of two parameters that automatically and continuously adjust the weightings of individual objective functions to satisfy user-defined performance criteria.
Skip Nav Destination
e-mail: ensmns@bath.ac.uk
Article navigation
February 2011
Research Papers
Experiments on the Transient Performance of an Adaptive Multi-Objective Controller for Rotating Machinery
M. Necip Sahinkaya,
M. Necip Sahinkaya
Reader
Mem. ASME
Department of Mechanical Engineering,
e-mail: ensmns@bath.ac.uk
University of Bath
, Bath BA2 7AY, UK
Search for other works by this author on:
Abdul-Hadi G. Abulrub,
Abdul-Hadi G. Abulrub
Research Fellow
Warwick Manufacturing Group,
University of Warwick
, Coventry CV4 7AL, UK
Search for other works by this author on:
Patrick S. Keogh,
Patrick S. Keogh
Professor of Machine Systems
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY UK
Search for other works by this author on:
Clifford R. Burrows
Clifford R. Burrows
Emeritus Professor
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY UK
Search for other works by this author on:
M. Necip Sahinkaya
Reader
Mem. ASME
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY, UKe-mail: ensmns@bath.ac.uk
Abdul-Hadi G. Abulrub
Research Fellow
Warwick Manufacturing Group,
University of Warwick
, Coventry CV4 7AL, UK
Patrick S. Keogh
Professor of Machine Systems
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY UK
Clifford R. Burrows
Emeritus Professor
Department of Mechanical Engineering,
University of Bath
, Bath BA2 7AY UKJ. Eng. Gas Turbines Power. Feb 2011, 133(2): 022503 (7 pages)
Published Online: October 28, 2010
Article history
Received:
April 14, 2010
Revised:
April 27, 2010
Online:
October 28, 2010
Published:
October 28, 2010
Citation
Sahinkaya, M. N., Abulrub, A. G., Keogh, P. S., and Burrows, C. R. (October 28, 2010). "Experiments on the Transient Performance of an Adaptive Multi-Objective Controller for Rotating Machinery." ASME. J. Eng. Gas Turbines Power. February 2011; 133(2): 022503. https://doi.org/10.1115/1.4002016
Download citation file:
Get Email Alerts
Cited By
On Leakage Flows In A Liquid Hydrogen Multi-Stage Pump for Aircraft Engine Applications
J. Eng. Gas Turbines Power
A Computational Study of Temperature Driven Low Engine Order Forced Response In High Pressure Turbines
J. Eng. Gas Turbines Power
The Role of the Working Fluid and Non-Ideal Thermodynamic Effects on Performance of Gas Lubricated Bearings
J. Eng. Gas Turbines Power
Tool wear prediction in broaching based on tool geometry
J. Eng. Gas Turbines Power
Related Articles
An Adaptive Multi-Objective Controller for Flexible Rotor and Magnetic Bearing Systems
J. Dyn. Sys., Meas., Control (May,2011)
Multiharmonic Adaptive Vibration Control of Misaligned Driveline via Active Magnetic Bearings
J. Dyn. Sys., Meas., Control (July,2008)
On the Control of Synchronous Vibration in Rotor/Magnetic Bearing Systems Involving Auxiliary Bearing Contact
J. Eng. Gas Turbines Power (April,2004)
Adaptive Vibration Control of a Rigid Rotor Supported by Active Magnetic Bearings
J. Eng. Gas Turbines Power (October,1996)
Related Proceedings Papers
Related Chapters
Introduction
Design of Mechanical Bearings in Cardiac Assist Devices
Research Tools
Bearing Dynamic Coefficients in Rotordynamics: Computation Methods and Practical Applications
Unbalance
Fundamentals of Rotating Machinery Diagnostics