Recent increases in petroleum fuel costs, corporate average fuel economy (CAFE) regulations, and environmental concerns about emissions from petroleum based fuels have created an increased opportunity for diesel engines and non-petroleum renewable fuels such as biodiesel. Additionally, the Environmental Protection Agencies Tier II heavy duty and light duty emissions regulations require significant reductions in and diesel particulate matter emissions for diesel engines. As a result, the diesel engine and aftertreatment system is a highly calibrated system that is sensitive to fuel characteristics. This study focuses on the impact of soy methyl ester biodiesel blends on combustion performance, , and carbonaceous soot matter emissions. Tests were completed using a 1.9 L, turbocharged direct injection diesel engine using commercially available 15 ppm ultra low sulfur (ULS) diesel, a soy methyl ester B20 biodiesel blend ( B100 and ULS diesel), and a pure soy methyl ester biodiesel. Results show a reduction in and carbonaceous soot matter emissions, and an increase in brake specific fuel consumption with the use of biodiesel. Further, traditional methodology assumes that diesel fuels with a high cetane number have a reduced ignition delay. However, results from this study show the cetane number is not the only parameter effecting ignition delay due to increased diffusion burn.
Combustion and Emissions Characterization of Soy Methyl Ester Biodiesel Blends in an Automotive Turbocharged Diesel Engine
Moscherosch, B. W., Polonowski, C. J., Miers, S. A., and Naber, J. D. (June 18, 2010). "Combustion and Emissions Characterization of Soy Methyl Ester Biodiesel Blends in an Automotive Turbocharged Diesel Engine." ASME. J. Eng. Gas Turbines Power. September 2010; 132(9): 092806. https://doi.org/10.1115/1.4000607
Download citation file: