Low plasticity burnishing (LPB) is now established as a surface enhancement technology capable of introducing through-thickness compressive residual stresses in the edges of gas turbine engine blades and vanes to mitigate foreign object damage (FOD). The “fatigue design diagram” (FDD) method has been described and demonstrated to determine the depth and magnitude of compression required to achieve the optimum high cycle fatigue strength, and to mitigate a given depth of damage characterized by the fatigue stress concentration factor, . LPB surface treatment technology and the FDD method have been combined to successfully mitigate a wide variety of surface damage ranging from FOD to corrosion pits in titanium and steel gas turbine engine compressor and fan components. LPB mitigation of fretting-induced damage in Ti–6Al–4V in laboratory samples has now been extended to fan and compressor components. LPB tooling technology recently developed to allow the processing of the pressure faces of fan and compressor blade dovetails and mating disk slots is described. Fretting-induced microcracks that form at the pressure face edge of bedding on both the blade dovetail and the dovetail disk slots in Ti-6-4 compressor components can now be arrested by the introduction of deep stable compression in conventional computer numerical control (CNC) machine tools during manufacture or overhaul. The compressive residual stress field design method employing the FDD approach developed at Lambda Technologies is described in application to mitigate fretting damage. The depth and magnitude of compression and the fatigue and damage tolerance achieved are presented. It was found that microcracks as deep as large enough to be readily detected by current nondestructive inspection (NDI) technology can be fully arrested by LPB. The depth of compression achieved could allow NDI screening followed by LPB processing of critical components to reliably restore fatigue performance and extend component life.
Skip Nav Destination
e-mail: ravi.ravindranath@navy.mil
Article navigation
August 2010
Research Papers
Mitigation of Fretting Fatigue Damage in Blade and Disk Pressure Faces With Low Plasticity Burnishing
Ravi A. Ravindranath,
e-mail: ravi.ravindranath@navy.mil
Ravi A. Ravindranath
Propulsion and Power
, NAVAIR, 22195 Elmer Road, Patuxent River, MD 20670-1534
Search for other works by this author on:
Michael Shepard
Michael Shepard
Search for other works by this author on:
Paul S. Prevéy
N. Jayaraman
Ravi A. Ravindranath
Propulsion and Power
, NAVAIR, 22195 Elmer Road, Patuxent River, MD 20670-1534e-mail: ravi.ravindranath@navy.mil
Michael Shepard
J. Eng. Gas Turbines Power. Aug 2010, 132(8): 082105 (8 pages)
Published Online: May 20, 2010
Article history
Received:
January 14, 2008
Revised:
February 5, 2008
Online:
May 20, 2010
Published:
May 20, 2010
Citation
Prevéy, P. S., Jayaraman, N., Ravindranath, R. A., and Shepard, M. (May 20, 2010). "Mitigation of Fretting Fatigue Damage in Blade and Disk Pressure Faces With Low Plasticity Burnishing." ASME. J. Eng. Gas Turbines Power. August 2010; 132(8): 082105. https://doi.org/10.1115/1.2943154
Download citation file:
Get Email Alerts
Heat Release Characteristics of a Volatile, Oxygenated, and Reactive Fuel in a Direct Injection Engine
J. Eng. Gas Turbines Power
Comprehensive Life Cycle Analysis of Diverse Hydrogen Production Routes and Application on a Hydrogen Engine
J. Eng. Gas Turbines Power
Related Articles
Improved High Cycle Fatigue Damage Tolerance of Turbine-Engine
Compressor Components by Low Plasticity Burnishing
J. Eng. Gas Turbines Power (January,2008)
Using a Dovetail Fixture to Study Fretting Fatigue and Fretting Palliatives
J. Eng. Mater. Technol (April,2006)
Case Studies of Fatigue Life Improvement Using Low Plasticity Burnishing in Gas Turbine Engine Applications
J. Eng. Gas Turbines Power (October,2006)
Related Proceedings Papers
Related Chapters
Artificial Indents as the Root Cause of Rolling Contact Fatigue Damage: Effect of Plastic Properties
Bearing and Transmission Steels Technology
Understanding the Problem
Design and Application of the Worm Gear
Pulsation and Vibration Analysis of Compression and Pumping Systems
Pipeline Pumping and Compression System: A Practical Approach, Third Edition