In a previous study (Shi, Y., and Reitz, R. D., 2008, “Assessment of Optimization Methodologies to Study the Effects of Bowl Geometry, Spray Targeting and Swirl Ratio for a Heavy-Duty Diesel Engine Operated at High-Load,” SAE Paper No. 2008-01-0949), nondominated sorting genetic algorithm II (NSGA II) (Deb, K., Pratap, A., Agarwal, S., and Meyarivan, T., 2002, “A Fast and Elitist Multiobjective Genetic Algorithm: NSGA-II,” IEEE Trans. Evol. Comput., 6, pp. 182–197) performed better than other popular multiobjective genetic algorithms (MOGAs) in engine optimization that sought optimal combinations of the piston bowl geometry, spray targeting, and swirl ratio. NSGA II is further studied in this paper using different niching strategies that are applied to the objective space and design space, which diversify the optimal objectives and design parameters, accordingly. Convergence and diversity metrics are defined to assess the performance of NSGA II using different niching strategies. It was found that use of design niching achieved more diversified results with respect to design parameters, as expected. Regression was then conducted on the design data sets that were obtained from the optimizations with two niching strategies. Four regression methods, including K-nearest neighbors (KNs), kriging (KR), neural networks (NNs), and radial basis functions (RBFs), were compared. The results showed that the data set obtained from optimization with objective niching provided a more fitted learning space for the regression methods. KNs and KR outperformed the other two methods with respect to prediction accuracy. Furthermore, a log transformation to the objective space improved the prediction accuracy for the KN, KR, and NN methods, except the RBF method. The results indicate that it is appropriate to use a regression tool to partly replace the actual CFD evaluation tool in engine optimization designs using the genetic algorithm. This hybrid mode saves computational resources (processors) without losing optimal accuracy. A design of experiment (DoE) method (the optimal Latin hypercube method) was also used to generate a data set for the regression processes. However, the predicted results were much less reliable than the results that were learned using the dynamically increasing data sets from the NSGA II generations. Applying the dynamical learning strategy during the optimization processes allows computationally expensive CFD evaluations to be partly replaced by evaluations using the regression techniques. The present study demonstrates the feasibility of applying the hybrid mode to engine optimization problems, and the conclusions can also extend to other optimization studies (numerical or experimental) that feature time-consuming evaluations and have highly nonlinear objective spaces.
Skip Nav Destination
Article navigation
Research Papers
Assessment of Multiobjective Genetic Algorithms With Different Niching Strategies and Regression Methods for Engine Optimization and Design
Yu Shi,
Yu Shi
Engine Research Center,
University of Wisconsin–Madison
, 1500 Engineering Drive, Madison, WI 53706
Search for other works by this author on:
Rolf D. Reitz
Rolf D. Reitz
Engine Research Center,
University of Wisconsin–Madison
, 1500 Engineering Drive, Madison, WI 53706
Search for other works by this author on:
Yu Shi
Engine Research Center,
University of Wisconsin–Madison
, 1500 Engineering Drive, Madison, WI 53706
Rolf D. Reitz
Engine Research Center,
University of Wisconsin–Madison
, 1500 Engineering Drive, Madison, WI 53706J. Eng. Gas Turbines Power. May 2010, 132(5): 052801 (9 pages)
Published Online: March 5, 2010
Article history
Received:
April 30, 2009
Revised:
May 25, 2009
Online:
March 5, 2010
Published:
March 5, 2010
Citation
Shi, Y., and Reitz, R. D. (March 5, 2010). "Assessment of Multiobjective Genetic Algorithms With Different Niching Strategies and Regression Methods for Engine Optimization and Design." ASME. J. Eng. Gas Turbines Power. May 2010; 132(5): 052801. https://doi.org/10.1115/1.4000144
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
A Co-Evolutionary Approach for Design Optimization via Ensembles of Surrogates With Application to Vehicle Crashworthiness
J. Mech. Des (January,2012)
Improved Multiple Point Nonlinear Genetic Algorithm Based Performance Adaptation Using Least Square Method
J. Eng. Gas Turbines Power (March,2012)
Hybrid Genetic Algorithm: A Robust Parameter Estimation Technique and its Application to Heavy Duty Vehicles
J. Dyn. Sys., Meas., Control (September,2006)
A GA Based Configuration Design Optimization Method
J. Mech. Des (January,2004)
Related Proceedings Papers
Related Chapters
Determination of Induction Motor Parameters by Differential Evolution Algorithm and Genetic Algorithms
International Conference on Advanced Computer Theory and Engineering (ICACTE 2009)
Regression
Engineering Optimization: Applications, Methods, and Analysis
Standard Usage and Transformation of Taguchi-Class Orthogonal Arrays
Taguchi Methods: Benefits, Impacts, Mathematics, Statistics and Applications