Specification of a turbocharger for a given engine involves matching the turbocharger performance characteristics with those of the piston engine. Theoretical considerations of matching turbocharger pressure ratio and mass flow with engine mass flow and power permits designers to approach a series of potential turbochargers suitable for the engine. Ultimately, the final choice among several candidate turbochargers is made by tests. In this paper two types of steady-flow experiments are used to match three different turbochargers to an automotive turbocharged-intercooled gasoline engine. The first set of tests measures the steady-flow performance of the compressors and turbines of the three turbochargers. The second set of tests measures the steady-flow design-point and off-design-point engine performance with each turbocharger. The test results show the design-point and off-design-point performance of the overall thermodynamic cycle, and this is used to identify which turbocharger is suitable for different types of engine duties.
Skip Nav Destination
Article navigation
July 2005
Technical Papers
Turbocharger-Design Effects on Gasoline-Engine Performance
Theodosios Korakianitis, James Watt Professor of Mechanical Engineering,,
Theodosios Korakianitis, James Watt Professor of Mechanical Engineering,
University of Glasgow, Glasgow G12 8QQ, Scotland UK
Search for other works by this author on:
T. Sadoi
T. Sadoi
Engine Design Division, Mitsubishi Motors Corporation, Kyoto, Japan
Search for other works by this author on:
Theodosios Korakianitis, James Watt Professor of Mechanical Engineering,
University of Glasgow, Glasgow G12 8QQ, Scotland UK
T. Sadoi
Engine Design Division, Mitsubishi Motors Corporation, Kyoto, Japan
Contributed by the International Gas Turbine Institute and presented at the 42nd International Gas Turbine and Aeroengine Congress and Exposition, Orlando, FL, June 2–5 1997. Manuscript received November 1, 1996; final revision received February 1, 1997. Paper No. 97-GT-387. Associate Editor: H. A. Kidd.
J. Eng. Gas Turbines Power. Jul 2005, 127(3): 525-530 (6 pages)
Published Online: June 24, 2005
Article history
Received:
November 1, 1996
Revised:
February 1, 1997
Online:
June 24, 2005
Citation
Korakianitis, T., and Sadoi, T. (June 24, 2005). "Turbocharger-Design Effects on Gasoline-Engine Performance ." ASME. J. Eng. Gas Turbines Power. July 2005; 127(3): 525–530. https://doi.org/10.1115/1.1808428
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Development and Performance Measurement of Oil-Free Turbocharger Supported on Gas Foil Bearings
J. Eng. Gas Turbines Power (March,2012)
Analysis and Methodology to Characterize Heat Transfer Phenomena in Automotive Turbochargers
J. Eng. Gas Turbines Power (February,2015)
Study of Energy-Saving Potential of Electronically Controlled Turbocharger for Internal Combustion Engine Exhaust Gas Energy Recovery
J. Eng. Gas Turbines Power (November,2016)
Aspects of Cooled Gas Turbine Modeling for the Semi-Closed O 2 / CO 2 Cycle With CO 2 Capture
J. Eng. Gas Turbines Power (July,2004)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential