The paper considers the use of gas fired micro turbine generators (MTG) for trigeneration (combined production of electricity, heating, and cooling) applications in tertiary buildings. The importance of the adopted MTG technology is investigated, showing that the high electrical efficiency levels achievable by future advanced ceramic MTGs would improve dramatically the economic competitiveness of the application, as well as the primary energy savings and environmental benefits. Calculations are performed by the simulation code TRIGEN, capable of optimizing the plant operating mode in each time step and integrating the results over the entire year. The requirement of a “target” energy saving index on the optimization procedure is also addressed.

1.
Green, S., 2001, “Distributed Generation—A New Wave,” Power Engineering International, PennWell, Mar.
2.
Gliddon-Bush, C., 2001, “Micro Size, Maximum Efficiency,” Power Engineering International, PennWell, July.
3.
Malrup, L., 2002, “Gaining Experience With Microturbine CHP,” Cogeneration and On-Site Power Production, James and James, eds., 3, May, pp. 60–63.
4.
Anon., 2002, “Landmark Installation for Micro-CHP,” Modern Power Systems, Wilmington Publishing, May.
5.
Campanari
,
S.
,
Boncompagni
,
L.
, and
Macchi
,
E.
,
2002
, “
Microturbines and Trigeneration: Optimization Strategies and Multiple Engine Configuration Effects
,” ASME Paper No. 2002-GT-30417, to be published on ASME J. Eng. Gas Turbines Power.
6.
Roncato, J. P., and Macchi, E., 2000, “Report of Study Group 7.2: Comparison of Medium or Large Scale CHP and Combined Cycles, in Various Countries,” Woc7 Report, Proc. of World Gas Conference 2000, Nice, June, pp. 55–82.
7.
Campanari, S., and Macchi, E., 2002, “Future Potentials of MTGs: Hybrid Cycles and Tri-Generation,” in Micro Turbine Generators, M. J. Moore, ed., Professional Engineering Publishing Ltd., IMechE, London, Chap. 4, pp. 43–66.
8.
Campanari
,
S.
,
2000
, “
Full Load and Part-Load Performance Prediction for Integrated SOFC and Microturbine Systems
,”
ASME J. Eng. Gas Turbines Power
,
122
, pp.
239
246
.
9.
Kobayashi, H. et al., 1998, “Current Status of Ceramic Gas Turbine (GT302),” ASME Paper 98-GT-501.
10.
Ohashi
,
I.
, and
Arakawa
,
S.
,
1995
, “
Development of 300 kW Class Ceramic Gas Turbine (CGT 303)
,”
ASME J. Eng. Gas Turbines Power
,
117
, p.
777
777
.
11.
Taoka, T. et al., 1998, “Current Status of the CGT301, Ceramic Gas Turbine,” ASME Paper 98-GT-288.
12.
Campanari, S., and Boncompagni, L., 2001, “Experimental Acquisition of Emission Data From a Commercial Microturbine,” Internal Technical Note, Department of Energetics, Politecnico di Milano, Sept.
13.
Anon., 1999, “Performance and Electrical Characterization Tests on a Microturbine Commercial Prototype,” EPRI-TR 114270, Dec.
14.
Anon., 2002, “T100 Microturbine CHP System Technical Description,” D10293 Ver. 5.0, Turbec AB, Sweden.
15.
De Biasi, V., 2001, “DOE Developing Technology Base for Advanced Microturbine Designs,” Gas Turbine World, Pequot Fairfield, CT, 31(4).
16.
Anon., 2002, “Methodology for Determining the Efficiency of Cogeneration Production,” Annex III of “Proposal for a Directive of the European Parliament and of the Council on the promotion of cogeneration”—2002/0185 (COD), Brussels, July.
17.
Carno¨, J., Cavani, A., and Liinanki, L., 1998, “Micro Gas Turbine for Combined Heat and Power in Distributed Generation,” ASME Paper 98-GT-309.
You do not currently have access to this content.