A numerical method based on the SIMPLE algorithm has been developed for the analysis of vapor flow in a concentric annular heat pipe. The steady-state response of a concentric annular heat pipe to various heat fluxes in the evaporator and condenser sections are studied. The fluid flow and heat transfer in the annular vapor space are simulated using Navier-Stokes equations. The governing equations are solved numerically, using finite volume approach. The vapor pressure and temperature distributions along a concentric annular heat pipe are predicted for a number of symmetric test cases. The vapor flow reversal and transition to turbulence phenomena are also predicted. The results are compared with the available numerical data and have shown good agreement in all cases. Therefore, the vapor flow model developed in this paper has shown good accuracy and convergence behavior in the range of low to moderate radial Reynolds numbers.

Issue Section:
Technical Papers
Keywords:
finite volume methods, pipe flow, heat transfer, flow simulation, Navier-Stokes equations, vapour pressure, turbulence, temperature distribution
Topics:
Flow (Dynamics), Heat pipes, Numerical analysis, Reynolds number, Turbulence, Vapors, Pressure, Condensers (steam plant), Heat transfer, Temperature distribution
1.
Wang
,
Q.
,
Cao
,
Y.
,
Wang
,
R.
,
Mignano
,
F.
, and
Chen
,
G.
,
2000
, “
Studies of a Heat Pipe Cooled Piston Crown
,”
ASME J. Eng. Gas Turbines Power
,
122
, pp.
99
–
105
.
2.
Peterson, G. P., 1994, An Introduction to Heat Pipes: Modeling, Testing, and Applications, John Wiely, New York.
3.
Cotter, T. P., 1965, Theory of Heat Pipes, Los Alamos Scientific Laboratory Report No. LA-3246-MS.
4.
Busse, C. A., 1967, “Pressure Drop in the Vapor Phase of Long Heat Pipes,” Proc. 1967IEEE Thermionic Conversion Specialist Conf., Palo Alto, California, p. 391.
5.
Bankston C. A. and Smith H. J., 1971, “Incompressible Laminar Flow in Cylindrical Heat Pipes,” ASME PAPER 17-WA/HT-15.
6.
Rohani, A. R., and Tien, C. L., 1974, “Analysis of the Effects of Vapor Pressure Drop on Heat Pipe Performance,” International Journal of Heat Mass Transfer, 17, pp. 61–67.
7.
Chi, S. W., 1976, Heat Pipe Theory and Practice, Hemisphere, Washington, D.C.
8.
Dunn, P. D. and Reay, D. A., 1982, Heat Pipes, Pergamon, Oxford.
9.
Faghri, A., 1995, Heat Pipe Science and Technology, Taylor & Francis, Washington, D.C.
10.
Faghri
,
A.
,
1986
, “
Vapor Flow Analysis in a Double-walled Concentric Heat Pipe
,”
Numer. Heat Transfer
,
10
, pp.
583
–
595
.
11.
Faghri
,
A.
, and
Parvani
,
S.
,
1988
, “
Numerical Analysis of Laminar Flow in a Double-walled Annular Heat Pipe
,”
J. Thermophys. Heat Transfer
,
2
, pp.
165
–
171
.
12.
Faghri
,
A.
,
1989
, “
Performance Characteristics of a Concentric Annular Heat Pipe Part II-Vapor Flow Analysis
,”
ASME J. Heat Transfer
,
111
, pp.
851
–
857
.
13.
Faghri
,
A.
, and
Thomas
,
S.
,
1989
, “
Performance Characteristics of a Concentric Annular Heat Pipe: Part I-Experimental Prediction and Analysis of the Capillary Limit
,”
ASME J. Heat Transfer
,
111
, pp.
844
–
850
.
14.
Ferziger, J. H. and M. Peric, 1999, Computational Methods for Fluid Dynamics, 2nd ed., Springer-Verlag, Berlin Heidelberg.
15.
Patankar, S. V., 1980, Numerical Heat Transfer and Fluid Flow, Hemisphere, New York.
16.
Schlichting, H., 1979, Boundary Layer Theory, Mc-Graw-Hill, New York.
Copyright © 2004
 by ASME
You do not currently have access to this content.