An aerodynamical model for studying three-dimensional flow fields about wind turbine rotors is presented. The developed algorithm combines a three-dimensional Navier-Stokes solver with a so-called actuator line technique in which the loading is distributed along lines representing the blade forces. The loading is determined iteratively using a blade-element approach and tabulated airfoil data. Computations are carried out for a 500 kW Nordtank wind turbine equipped with three LM19.1 blades. The computed power production is found to be in good agreement with measurements. The computations give detailed information about basic features of wind turbine wakes, including distributions of interference factors and vortex structures. The model serves in particular to analyze and verify the validity of the basic assumptions employed in the simple engineering models.
Skip Nav Destination
Article navigation
June 2002
Additional Technical Papers
Numerical Modeling of Wind Turbine Wakes
Jens No̸rkær So̸rensen, Associate Professor,
Jens No̸rkær So̸rensen, Associate Professor
Department of Mechanical Engineering, Building 403, Technical University of Denmark, DK-2800 Lyngby, Denmark
Search for other works by this author on:
Wen Zhong Shen, Associate Professor
Wen Zhong Shen, Associate Professor
Department of Mechanical Engineering, Building 403, Technical University of Denmark
Associate Professor, Research Center for High Speed Trains, Changsha Railway University, China
Search for other works by this author on:
Jens No̸rkær So̸rensen, Associate Professor
Department of Mechanical Engineering, Building 403, Technical University of Denmark, DK-2800 Lyngby, Denmark
Wen Zhong Shen, Associate Professor
Department of Mechanical Engineering, Building 403, Technical University of Denmark
Associate Professor, Research Center for High Speed Trains, Changsha Railway University, China
Contributed by the Fluids Engineering Division for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received by the Fluids Engineering Division November 16, 1999; revised manuscript received November 20, 2001. Associate Editor: U. Ghia.
J. Fluids Eng. Jun 2002, 124(2): 393-399 (7 pages)
Published Online: May 28, 2002
Article history
Received:
November 16, 1999
Revised:
November 20, 2001
Online:
May 28, 2002
Citation
So̸rensen, J. N., and Shen, W. Z. (May 28, 2002). "Numerical Modeling of Wind Turbine Wakes ." ASME. J. Fluids Eng. June 2002; 124(2): 393–399. https://doi.org/10.1115/1.1471361
Download citation file:
Get Email Alerts
Related Articles
Review Paper on Wind Turbine Aerodynamics
J. Fluids Eng (November,2011)
Peak and Post-Peak Power Aerodynamics from Phase VI NASA Ames Wind Turbine Data
J. Sol. Energy Eng (May,2005)
Numerical Implications of Solidity and Blade Number on Rotor Performance of Horizontal-Axis Wind Turbines
J. Sol. Energy Eng (November,2003)
Skewed Wake Induction Effects on Thrust Distribution on Small Wind Turbine Rotors
J. Sol. Energy Eng (November,2001)
Related Proceedings Papers
Related Chapters
Wind Turbine Airfoils and Rotor Wakes
Wind Turbine Technology: Fundamental Concepts in Wind Turbine Engineering, Second Edition
Wind Turbine Aerodynamics Part B: Turbine Blade Flow Fields
Wind Turbine Technology: Fundamental Concepts in Wind Turbine Engineering, Second Edition
Wind Turbine Aerodynamics Part A: Basic Principles
Wind Turbine Technology: Fundamental Concepts in Wind Turbine Engineering, Second Edition